Electricity: Circuits and their Components
How a torch works, what cells, batteries, lamps, LEDs and switches do, how to join them in a circuit and draw it with symbols, and which materials let electric current pass through them.
16 questions on this chapter. Tap an answer to check it straight away. Each answer is explained.
1Which part of a torch is the source of electricity?
The cells supply the electricity. The switch only opens or closes the circuit.
2The metal cap of an electric cell is its
The metal cap is the + terminal; the flat metal base is the − terminal.
3How are two cells joined to make a battery?
In a battery, the + terminal of one cell is joined to the − terminal of the next.
4What glows inside an incandescent bulb?
The thin coiled wire called the filament gets very hot and glows.
5A bulb does not glow even with a new cell. Its filament is broken. The bulb is said to have
A bulb with a broken filament has fused. There is a gap inside it, so no current can pass.
6Which leg of an LED is its positive terminal?
The longer leg is +. It must be joined towards the + terminal of the cell.
7An LED does not glow but a bulb in its place does. What is the most likely reason?
An LED glows only when its + leg is towards the + terminal. A bulb glows either way, so the cell and wires are fine.
8An electric circuit is
A circuit is a complete path from the + terminal, through the components, back to the − terminal.
9In which direction do we show the current in a circuit?
By agreement, current is shown flowing from the + terminal, round the circuit, to the − terminal.
10When a switch is OFF, what is between its terminals?
An OFF switch leaves an air gap. Air is an insulator, so the circuit is open.
11Where should a switch be placed in a circuit of one cell and one lamp to turn the lamp off?
Opening the circuit at any point stops the current everywhere, so the switch can go anywhere.
12In the symbol of a cell, the + terminal is shown by
Long line, + terminal; short thick line, − terminal.
13Which of these is a conductor of electricity?
Metals such as iron are conductors. Rubber, plastic and wood are insulators.
14Which of these is an insulator?
Glass does not let current pass. Copper, aluminium and graphite (pencil lead) are conductors.
15Why is the metal of a connecting wire covered with plastic?
The plastic covering is an insulator. It stops current from passing to anything, or anyone, touching the wire.
16Which of these is safe to do?
Cells are safe for activities. The mains supply from sockets is dangerous and must never be used for experiments.
Answered 0 of 16Score 0