Chapter 3 · Science

Electricity: Circuits and their Components

How a torch works, what cells, batteries, lamps, LEDs and switches do, how to join them in a circuit and draw it with symbols, and which materials let electric current pass through them.

Interactive simulator

Circuit lab

Turn the switch on and watch the current flow round the circuit and light the bulb. Then add a cell, try a fused bulb, and test which objects let current through.

A circuit with a cell, a switch, a bulb and a test gap, joined by wires. +− Cell Switch Bulb Test gap Copper wire

Electric current, from the + terminal, round the circuit, to the − terminal

Circuit
Open
Current
None
Bulb
Off
Cells
Bulb
Put in the test gap

What is happening

Try this

  1. Switch on. Follow the moving dots: where does the current leave the cell, and where does it go back in?
  2. Switch off. Why does the bulb go out at once, even though the cell and the bulb are still joined by wires?
  3. Change from 1 cell to 2 cells (a battery). What happens to the brightness of the bulb?
  4. Put each object in the test gap in turn. Which ones make the bulb glow? What do they have in common?
  5. Choose the fused bulb and switch on. Why does the bulb not glow, even with a copper wire in the gap?