Chapter 4 · Science

The World of Metals and Non-metals

How metals and non-metals differ in lustre, hardness, malleability, ductility, sonority and conduction, how they react with air and water, why iron rusts, and how both kinds of materials are used in everyday life.

Done reading? Try the Metal detective activity on this chapter.
In this chapter 8 topics
  1. 1Metals and non-metals around us
  2. 2Malleability and ductility
  3. 3Sonority: the ringing sound
  4. 4Conduction of heat and electricity
  5. 5Air, water and iron: rusting
  6. 6Air and water on other metals
  7. 7Non-metals in air and water
  8. 8Uses of metals and non-metals

1Metals and non-metals around us

Look around your kitchen. You may see steel plates, an iron tawa, an aluminium pan and a copper-bottomed pot. Someone at home may wear a gold ring or a silver anklet. All of these are made of metals.

Now think of the coal in a chulha, the sulphur in a matchstick head, or the oxygen we breathe. These are non-metals.

  • Some metals: iron, copper, aluminium, zinc, gold, silver, sodium and magnesium.
  • Some non-metals: carbon (as coal, charcoal or graphite), sulphur, oxygen, nitrogen, iodine and chlorine.

How do we tell the two groups apart? By their properties. A property is a feature of a material: how it looks, how it feels and how it behaves. For example, “shiny” and “bends without breaking” are properties.

Metals and non-metals

Metals are usually shiny and hard. They can be beaten into sheets and drawn into wires. They ring when struck, and let heat and electricity pass through them easily. Non-metals are usually dull, and soft or easy to break. They give a dull sound and do not let heat and electricity pass easily.

Figure 1 shows five simple tests. You will learn about each one in the topics that follow.

Five tests to tell a metal from a non-metal. Rub it: a metal is shiny, a non-metal is dull. Hammer it: a metal flattens into a sheet, a non-metal breaks into pieces. Pull it: a metal can be drawn into a wire, a non-metal snaps. Strike it: a metal rings, a non-metal gives a dull thud. Use a tester: with a metal the lamp glows, with a non-metal it does not glow.A metalA non-metalRub itlustreShinyDullHammer itmalleabilityFlattensBreaksPull itductilityMakes wireSnapsStrike itsonorityRingsDull thudUse a testerconductionLamp glowsNo glow
Figure 1. Five tests to tell a metal from a non-metal.

Lustre: the shine of metals

Metals have a shine called lustre. An old iron nail or copper coin may look dull. Why? Air and moisture have slowly formed a coating on its surface. Rub it with sandpaper, and the fresh metal underneath shines. Rubbing a piece of coal or sulphur does not make it shine.

Lustre

The shine of a freshly cut or rubbed surface is called lustre. Materials that have it are lustrous. Most metals are lustrous; most non-metals are not.

Hardness

Try scratching an iron nail, a piece of coal and a lump of sulphur with a key. The iron is hard to scratch. Coal and sulphur scratch easily or crumble. Most metals are hard. A few are exceptions: sodium and potassium are so soft that you can cut them with a knife, like cold butter.

Most metals are solids at room temperature. But mercury is a liquid metal. It was used in old glass thermometers. Non-metals can be solids (carbon, sulphur, iodine), a liquid (bromine) or gases (oxygen, nitrogen).

Remember

  • Metals: iron, copper, aluminium, zinc, gold, silver, sodium, magnesium.
  • Non-metals: carbon, sulphur, oxygen, nitrogen, iodine, chlorine.
  • Metals are lustrous and mostly hard; mercury is a liquid metal; sodium can be cut with a knife.
Quick checkAn old copper coin looks dull. How can you show that copper is lustrous?Show answer

Rub the coin with sandpaper. The dull coating comes off, and the fresh copper surface underneath shines.

2Malleability and ductility

Try this with your teacher. Place a small piece of aluminium, a thick iron nail and a lump of coal on a hard surface. Hit each one a few times with a hammer. The metals flatten and spread out. The coal shatters into pieces.

Left: a lump of metal hammered on a wooden block spreads out into a thin sheet, so the metal is malleable. Right: a piece of coal hammered the same way breaks into small pieces, so coal is brittle.A metalthin sheetspreads out when beatenMalleableA piece of coalsmall piecesbreaks into piecesBrittle
Figure 2. Hammering a metal and a piece of coal.

Malleability

The property of a material by which it can be beaten into thin sheets is called malleability. Metals are malleable. Non-metals such as coal and sulphur break into pieces when hammered. They are brittle, which means they break easily.

We use malleability every day:

  • Aluminium is rolled into thin foil for wrapping food.
  • Silver is beaten into very thin leaves, the silver varq on sweets. Gold can be beaten thin in the same way.
  • Iron sheets are shaped into buckets, trunks and the bodies of vehicles.

Ductility

Metals can also be pulled into thin wires. Here is how a wire is made:

  1. Take a thick metal rod.
  2. Pull it through a hole in a hard plate. It comes out a little thinner.
  3. Pull it through a smaller hole, then a smaller one, and so on.
  4. Each time it gets thinner and longer, until it becomes a long, thin wire.
A thick copper rod is pulled through a hole in a steel plate and then through a smaller hole in a second plate. Each time it gets thinner and longer, and it ends as a long, thin wire wound into a coil. This shows that copper is ductile.thick rodholes get smallerpulled throughone hole after anotherlong, thin wirepull
Figure 3. Drawing a copper rod into a thin wire.

Ductility

The property of a material by which it can be drawn (pulled) into wires is called ductility. Metals are ductile. Non-metals are not.

Copper and aluminium wires carry electricity in our homes. Steel wires are used in cables, fences and the strings of a guitar or sitar.

Gold is the most malleable and ductile metal. Just a small amount of gold can be beaten into a huge, very thin sheet. It can also be drawn into a very long wire.

Remember

  • Malleable: can be beaten into thin sheets. Ductile: can be drawn into wires.
  • Metals are malleable and ductile; non-metals such as coal and sulphur are brittle.
  • Gold is the most malleable and ductile metal.
Quick checkAluminium foil and copper wire are both made from metals. Which property is used in each?Show answer

Aluminium foil: malleability (beaten or rolled into thin sheets). Copper wire: ductility (drawn into wires).

3Sonority: the ringing sound

Drop a steel spoon on the floor, and it makes a ringing sound. Drop a wooden spoon or a piece of coal, and you hear only a dull thud. Metals ring when they are struck.

Left: a brass bell, when struck, rings loudly, shown by sound waves spreading out on both sides; metals are sonorous. Right: a wooden block struck with a stick gives only a dull thud; wood is not sonorous.A metal bell rings loudlySonorousthudWood gives a dull soundNot sonorous
Figure 4. A metal bell rings; a wooden block gives a dull sound.

Sonority

The property of making a ringing sound when struck is called sonority. Metals are sonorous. Non-metals are not.

Because metals are sonorous, we make many sound-making things from them. Examples are school and temple bells, ghungroos, cymbals (manjira) and wind chimes. Wooden or plastic bells would not ring.

Remember

  • Sonorous: gives a ringing sound when struck.
  • Metals are sonorous; non-metals give a dull sound.
  • School bells, temple bells and cymbals are made of metals.
Quick checkWhy is a school bell made of metal and not of wood?Show answer

Metals are sonorous: they ring loudly when struck. Wood gives only a dull sound that would not be heard far away.

4Conduction of heat and electricity

Put a steel spoon and a wooden spoon in a cup of hot water. Wait a minute, then carefully touch their handles. The steel handle is warm or hot. The wooden handle is still cool. This shows that heat travels easily through the metal, but not through the wood.

Left: a steel spoon and a wooden spoon stand in a beaker of hot water. The handle of the steel spoon becomes hot, while the wooden spoon stays cool. Right: a tester made of a cell, a lamp and wires, with an iron nail joining the two free ends. The lamp glows, so the metal lets electric current pass.steel: hotwood: coolHot water+−iron nailThe lamp glowscell
Figure 5. Left: heat travels up a metal spoon. Right: a metal completes the circuit of a tester.

Conductors and poor conductors

A material that lets heat or electricity pass through it easily is a good conductor. Metals are good conductors of heat and electricity. Most non-metals are poor conductors.

Conduction of heat

Cooking pots, pans and kettles are made of metals such as aluminium, iron, steel and copper. This lets heat from the flame pass quickly to the food.

Their handles are often made of wood or plastic. These are poor conductors, so the handles stay cool enough to hold. Copper and aluminium conduct heat better than iron and steel. That is why some steel pots have a copper bottom.

Conduction of electricity

  1. Make a tester with a cell, a lamp and wires. Leave two free wire ends.
  2. Touch both free ends to a material.
  3. With an iron nail, a copper wire or aluminium foil, the lamp glows.
  4. With coal, sulphur, wood or plastic, it does not.

So metals conduct electricity. That is why electric wires are made of copper or aluminium. They are covered with plastic, which does not conduct, so they are safe to touch.

Graphite is an exception. It is a form of carbon, which is a non-metal. Yet it conducts electricity. The “lead” of a pencil is made of graphite.

Never test materials with the electricity from wall sockets. Use only a cell.

Remember

  • Metals conduct heat and electricity well; most non-metals are poor conductors.
  • Pots are made of metal; their handles of wood or plastic.
  • Graphite, a non-metal, conducts electricity.
Quick checkWhy are electric wires made of copper but covered with plastic?Show answer

Copper is a good conductor, so current passes easily through it. Plastic does not conduct, so the covering keeps us safe from electric shocks.

Try it yourselfSpot metals and non-metals in pictures, match everyday uses to the property behind them, and tell basic oxides from acidic ones in the Metal detective game.

5Air, water and iron: rusting

Iron gates, railings, buckets and tools left in the open slowly get covered with a reddish-brown, flaky layer. This layer is rust.

Rust is a new substance. It forms when iron reacts (joins chemically) with oxygen from the air. A substance formed when something joins with oxygen is called an oxide.

Rusting

When iron is in contact with air (oxygen) and water (moisture) together, a reddish-brown substance called rust forms on it. Rust is mainly iron oxide. This process is called rusting.

What does iron need to rust?

Take three clean iron nails and three test tubes. Set them up like this:

  • Tube A: some tap water. The nail touches both air and water.
  • Tube B: boiled water covering the nail, with a layer of oil on top. Normal water has a little air mixed into it (that is how fish breathe). Boiling drives this air out. The oil stops air from getting back in. So this nail has water but no air.
  • Tube C: dry air only. A little drying substance sits at the bottom to soak up any moisture. Your teacher may use anhydrous calcium chloride (“anhydrous” means “without water”). So this nail has air but no water.
Three corked test tubes in a rack, each with an iron nail. Tube A has some water and air: the nail rusts, with brown patches near the water. Tube B has boiled water with a layer of oil on top, so no air reaches the nail: it does not rust. Tube C has dry air, with a white drying substance at the bottom that removes moisture: the nail does not rust.Tube AAir and waterRustsTube BBoiled waterwith oil on topNo rustTube CDry air(drying agent below)No rustoil
Figure 6. Which iron nail rusts?

Close the tubes and leave them for a few days. Only the nail in tube A rusts.

  • Tube B had water but no air. No rust.
  • Tube C had air but no water. No rust.

So iron needs both air and water to rust. Rusting is faster in damp places and near the sea, where the air is moist and salty.

Why rusting is a problem

Rust is weak and flaky. It falls off and uncovers fresh iron underneath. Then that iron rusts too. Slowly the iron object becomes thin and may break. Bridges, ships, vehicles, pipes and railings are damaged this way. Replacing them costs a lot.

Preventing rust

The idea is simple: keep air and water away from the iron.

  • Painting gates, grills and bridges.
  • Oiling or greasing tools, bicycle chains and machine parts.
  • Galvanising: coating iron with a thin layer of zinc. Buckets and roofing sheets are often galvanised.
  • Coating with other metals such as chromium (on shiny bicycle handles) or tin.

Remember

  • Rust is a reddish-brown, flaky substance, mainly iron oxide.
  • Iron rusts only when both air and water are present.
  • Paint, oil, grease or a zinc coating (galvanising) prevent rusting.
Quick checkA bicycle chain is oiled regularly. How does this help?Show answer

The oil forms a layer over the iron. It keeps air and moisture away, so the chain does not rust. It also helps the chain move smoothly.

6Air and water on other metals

Iron is not the only metal that changes in air and water. Different metals react in different ways. Some hardly react at all.

MetalWhat happensExample
CopperSlowly gets a green coating in moist airOld copper vessels and statues turn green
SilverSlowly turns black in airSilver anklets and coins darken
GoldDoes not react with air or water; keeps its shineGold jewellery stays bright for years
MagnesiumBurns in air with a dazzling white lightForms a white powder, magnesium oxide
SodiumReacts very fast with air and with water; may catch fire in waterStored under kerosene

Burning magnesium

  1. Your teacher holds a clean strip of magnesium ribbon with tongs.
  2. The teacher lights it in a flame. It burns with a dazzling white light.
  3. A white powder is left behind (see Figure 7, left). The magnesium has joined with oxygen from the air to form magnesium oxide.
  4. The white powder is mixed with a little water and tested with litmus. It turns red litmus blue.

So the solution is basic. Oxides of metals are generally basic.

Only your teacher should burn magnesium. Do not look straight at the bright flame.

Metal oxides

Metals join with oxygen to form metal oxides. Metal oxides are generally basic: their solutions in water turn red litmus blue.

Sodium: a very active metal

Sodium reacts very quickly with oxygen and water vapour in the air. So it cannot be left in the open. In water it reacts violently (very strongly), gives off heat and may catch fire. So it is stored under kerosene, an oil that keeps air and water away from it.

Left: a strip of magnesium ribbon held in metal tongs burns with a dazzling white light, and a white powder, magnesium oxide, collects in a dish below. Right: lumps of sodium kept at the bottom of a corked glass bottle of kerosene, which keeps air and water away from the sodium.Magnesium burnsdazzlingwhite lightwhite powder(magnesium oxide)Sodium in kerosenekerosenesodiumkeeps air andwater away
Figure 7. Left: magnesium burns in air. Right: sodium is stored under kerosene.

Metals that stay shiny

Gold and platinum do not react with air or water, so they keep their shine. They are also lustrous and malleable. That is why they are used for jewellery.

Remember

  • Copper turns green and silver turns black in air; gold does not change.
  • Magnesium burns with a dazzling white light to form magnesium oxide, which is basic.
  • Sodium reacts violently with water, so it is kept under kerosene.
Quick checkWhy does gold jewellery stay shiny for years while silver anklets turn black?Show answer

Gold does not react with air or water. Silver slowly reacts with substances in the air and forms a black coating.

7Non-metals in air and water

What happens when a non-metal is burnt? Let us see with sulphur.

Burning sulphur

  1. Your teacher heats a little sulphur powder in a deflagrating spoon (a spoon with a long handle, used for burning things).
  2. It burns with a blue flame. It gives off a gas with a choking smell. This gas is sulphur dioxide, an oxide of sulphur.
  3. The teacher puts the spoon into a jar with a little water, covers it and shakes it. The gas dissolves (mixes in and disappears) in the water.
  4. This solution turns blue litmus red.

So the solution is acidic.

Sulphur dioxide is harmful to breathe. Only your teacher should burn sulphur, in an open, airy place.

Non-metal oxides

Non-metals join with oxygen to form non-metal oxides. Non-metal oxides are generally acidic: their solutions in water turn blue litmus red.

Two picture flows side by side. Left: magnesium, a metal, burns in air to form magnesium oxide, a white ash. Its solution in water turns red litmus blue, so the oxide is basic. Right: sulphur, a non-metal, burns in air to form sulphur dioxide, a gas. Its solution in water turns blue litmus red, so the oxide is acidic.Metal: magnesiumMagnesium ribbonburns in airMagnesium oxide(white ash)Ash dissolvedin waterRed litmusturns blueBasicNon-metal: sulphurSulphur burnsin airSulphur dioxide(a gas)Gas dissolvedin waterBlue litmusturns redAcidic
Figure 8. Metal oxides are basic; non-metal oxides are acidic.

Carbon is another example. When coal or charcoal burns, it forms carbon dioxide. A little carbon dioxide dissolves in water and makes a weak acid. This is what gives soda water its slightly sour taste.

Non-metals and water

Non-metals generally do not react with water. You can keep sulphur and carbon in water, and they do not change. Some non-metals react very fast with air instead. Phosphorus catches fire in air, so it is stored under water.

Metal oxideNon-metal oxide
ExampleMagnesium oxideSulphur dioxide, carbon dioxide
NatureBasicAcidic
Effect on litmusRed litmus turns blueBlue litmus turns red

Remember

  • Sulphur burns to form sulphur dioxide, whose solution in water is acidic.
  • Metal oxides are basic; non-metal oxides are acidic.
  • Phosphorus is stored under water; sodium under kerosene.
Quick checkThe solution of an oxide turns blue litmus red. Is the oxide more likely to be of a metal or a non-metal?Show answer

A non-metal. Its solution is acidic, and non-metal oxides are generally acidic.

8Uses of metals and non-metals

The properties of a material decide what we use it for. Here is a summary of how metals and non-metals differ.

PropertyMetalsNon-metals
Lustre (shine)Shiny, especially when freshly cut or rubbedDull (iodine is an exception)
HardnessMostly hard (sodium and potassium are soft)Mostly soft or brittle (diamond is very hard)
Malle­abilityCan be beaten into thin sheetsBreak into pieces: brittle
Duct­ilityCan be drawn into wiresCannot be drawn into wires
SonorityRing when struckGive a dull sound
Heat and elec­tricityGood conductorsPoor conductors (graphite conducts electricity)
OxideBasic: its solution turns red litmus blueAcidic: its solution turns blue litmus red

Uses of metals

UseMetalProperty used
Food wrapping foilAluminiumMalleable, light, does not rust
Electric wiresCopper, aluminiumDuctile, good conductor of electricity
Cooking potsAluminium, iron, steel, copperGood conductor of heat
JewelleryGold, silver, platinumLustrous, malleable, does not rust
Bells, cymbalsBrass, bronze, steelSonorous
Buildings, bridges, vehiclesIron (as steel)Hard and strong

Are non-metals essential?

Very much so. Life itself depends on non-metals.

  • Oxygen is needed by all living things for respiration, the process that gets energy from food. Fuels also need oxygen to burn.
  • Nitrogen makes up most of the air. Fertilisers that contain nitrogen help plants grow healthy.
  • Carbon is present in all living things. It is also in fuels such as coal, wood, petrol and LPG.
  • Chlorine kills germs. It is used to make drinking water and swimming pool water safe.
  • Iodine is used as tincture of iodine, a brown liquid put on wounds. It is an antiseptic, which means it kills germs. Iodised salt gives us the iodine our body needs.
  • Sulphur is used in making medicines, matchsticks and firecrackers. It also makes rubber stronger.
  • Phosphorus is used in fertilisers and matchboxes.

Metals and non-metals are both useful. Many of them are in our body too: calcium in bones, iron in blood, and oxygen, carbon, hydrogen and nitrogen everywhere.

Remember

  • A material is chosen for a use because of its properties.
  • Oxygen for breathing, nitrogen in fertilisers, chlorine to purify water, iodine as an antiseptic.
  • Both metals and non-metals are essential in daily life.
Quick checkWhy is chlorine added to the water supplied to towns?Show answer

Chlorine kills germs in the water, so the water becomes safe to drink.

Test yourselfTake the 16-question practice quiz on this chapter.