Chapter 5 · Science

Changes Around Us: Physical and Chemical

How to tell physical changes from chemical changes, how to test for carbon dioxide, why iron rusts and things burn, how a candle shows both kinds of change, and whether changes are reversible, desirable, fast or slow.

Done reading? Try the Change detective activity on this chapter.
In this chapter 9 topics
  1. 1Changes around us
  2. 2Physical changes
  3. 3Chemical changes and the lime water test
  4. 4Rusting of iron
  5. 5Combustion, ignition and the fire triangle
  6. 6A burning candle: both changes at once
  7. 7Reversible and irreversible changes
  8. 8Desirable and undesirable changes
  9. 9Slow natural changes: weathering and erosion

1Changes around us

Things around us keep changing. Ice in a glass turns into water. A bud opens into a flower. A green banana turns yellow, then brown and soft, and starts to smell sweet. Wet clothes dry in the sun, wood burns in a fire, and maize grains puff up into popcorn.

Every material has properties. These are the features you can notice about it, such as how it looks, feels, smells or tastes. When something changes, one or more of its properties may change:

  • shape or size (a ball of dough rolled flat into a roti);
  • state, that is, whether it is a solid, a liquid or a gas (ice melting into water);
  • colour, smell or taste (a banana ripening).

Two big questions

A substance is the kind of material something is made of, such as sugar, water, iron or wax. To sort changes, scientists ask two questions:

  • After the change, is it still the same substance, or has a new substance been formed?
  • Can the change be undone?

The first question sorts changes into physical and chemical changes. The second sorts them into reversible changes (they can be undone) and irreversible changes (they cannot). We can also ask two more things. Is the change useful to us? Is it fast or slow?

ChangeWhat changes?
Ice meltingState: solid to liquid
Chopping a carrotSize and shape
Banana ripeningColour, softness, smell, taste
Wood burningWood turns into ash, smoke and gases
Drying clothesWater leaves the cloth as vapour

Remember

  • Changes can alter shape, size, state, colour, smell or taste.
  • Key question: is a new substance formed?
  • Changes can also be reversible or not, desirable or not, fast or slow.
Quick checkA balloon is blown up. Which property of the balloon changes?Show answer

Its size and shape change. It is still the same rubber.

2Physical changes

Fold a sheet of paper into a boat. Blow up a balloon and let the air out. Crush a piece of chalk into powder. In each case the shape or size changes. But the material stays the same. Paper is still paper, rubber is still rubber, and chalk powder is still chalk.

Physical change

A physical change is a change in which only properties such as shape, size or state change. No new substance is formed.

Left: an ice cube melts into a puddle of water. Water and ice are the same substance, so no new substance is formed: a physical change. Right: a sheet of paper burns and leaves grey ash and smoke, which are new substances: a chemical change.Physical changemeltsicewaterStill the same substanceNo new substanceChemical changeburnspaperash and smokeNew substances formedChemical change
Figure 1. Ice melting is a physical change. Paper burning is a chemical change.

Change of state

Water can be a solid (ice), a liquid (water) or a gas (water vapour). Here is what each change of state means:

  • Melting: solid to liquid (ice cream melting on a hot day).
  • Freezing: liquid to solid (water in the freezer becoming ice).
  • Boiling and evaporation: liquid to gas (water drying from a wet floor).
  • Condensation: gas to liquid (drops forming on the outside of a cold glass).

Ice, water and steam are all the same substance. So all these changes are physical changes.

More examples

  • Dissolving sugar or salt in water. The sugar seems to vanish, but the water tastes sweet. So the sugar is still there. If you let the water evaporate, you get the sugar back.
  • Melting butter or wax, tearing paper, cutting cloth, stretching a rubber band, breaking glass and drying clothes.

A physical change may or may not change the state. Tearing paper does not change its state. Melting butter does.

Remember

  • Physical change: no new substance is formed.
  • Only shape, size, state or appearance changes.
  • Melting, freezing, boiling, evaporation, condensation and dissolving are physical changes.
Quick checkIs crushing a piece of chalk into powder a physical or a chemical change? Why?Show answer

A physical change. Only the size of the pieces changes. The powder is still chalk; no new substance is formed.

3Chemical changes and the lime water test

When paper burns, it does not stay paper. It turns into ash, smoke and gases. These are quite different from paper. Here new substances have been formed.

Chemical change

A chemical change is a change in which one or more new substances are formed. It happens through a chemical reaction, which means substances acting on each other to make new ones.

We can write a chemical reaction in short as a chemical equation. The starting substances go on the left. An arrow (→) means “change into”. The new substances go on the right. You will see some word equations below.

Signs of a chemical change

You will often notice one or more of these signs during a chemical change:

  • a gas is given off (bubbles or fizzing), as when you add lemon juice to baking soda;
  • the colour changes, as when a cut apple turns brown;
  • heat or light is given out (a burning matchstick), or heat is taken in;
  • a new smell is produced, as when food goes bad;
  • a solid forms in a liquid, as when milk curdles.

Breathing out into lime water

Lime water is a clear liquid made by dissolving a little lime (calcium hydroxide) in water. Try this with your teacher:

  1. Take some tap water in one test tube.
  2. Take some fresh, clear lime water in another test tube.
  3. Gently blow air from your mouth into each tube through a straw. Do not suck the liquid up.
Two test tubes, each with a straw dipping into the liquid. Air is gently blown out through the straws. The tap water only bubbles and stays clear. The lime water turns milky, and a white solid slowly settles at the bottom.Tap waterStays clearblow gentlyLime waterTurns milkyblow gentlywhite solid
Figure 2. Breathing out into tap water and into lime water.

The tap water only bubbles. The lime water turns milky, and after a while a white solid settles at the bottom. Why does this happen?

  • The air you breathe out contains carbon dioxide gas.
  • Carbon dioxide reacts with the calcium hydroxide in the lime water.
  • This forms calcium carbonate, a white solid. It does not dissolve in water, so tiny bits of it float about and make the liquid look milky.

Carbon dioxide + Calcium hydroxide → Calcium carbonate + Water

A new substance, calcium carbonate, is formed. So this is a chemical change. It is also the test for carbon dioxide: a gas that turns lime water milky is carbon dioxide.

Vinegar and baking soda

  1. Put a spoonful of baking soda in a flask.
  2. Add some vinegar or lemon juice. The mixture fizzes at once.
  3. Pass the gas through lime water using a bent tube.
A conical flask holds vinegar with baking soda at the bottom; the mixture fizzes. The flask is closed with a cork, and a bent glass tube carries the gas given off into a test tube of lime water. The gas bubbles through the lime water, which turns milky. So the gas is carbon dioxide.carbon dioxide gaslime waterVinegar + baking sodafizzesLime waterturns milky
Figure 3. The gas from vinegar and baking soda turns lime water milky.

The lime water turns milky, so the gas is carbon dioxide. Vinegar contains acetic acid. The chemical name of baking soda is sodium hydrogen carbonate. They react to form new substances:

Acetic acid + Sodium hydrogen carbonate → Sodium acetate + Carbon dioxide + Water

Do this with your teacher. Use only small amounts, and never taste or smell chemicals directly.

Physical changeChemical change
New substance formed?NoYes, one or more
What changesShape, size, state, colour or positionThe substance itself: its make-up and properties
Can it be written as a chemical equation?NoYes
Usually reversible?Often (but not always)Rarely
ExamplesMelting ice, tearing paper, dissolving sugarBurning paper, rusting, cooking, curdling of milk

Remember

  • Chemical change: one or more new substances are formed.
  • Carbon dioxide turns lime water milky (calcium carbonate is formed).
  • Vinegar or lemon juice with baking soda gives off carbon dioxide.
Quick checkA gas is bubbled through lime water and the lime water turns milky. Which gas is it, and what new substance is formed?Show answer

The gas is carbon dioxide. It forms calcium carbonate, a white solid that does not dissolve, so the liquid looks milky.

4Rusting of iron

Think of an old iron gate, a bicycle chain or a nail left outside. Slowly it gets a reddish-brown, flaky coating. This coating is rust. It is not iron any more. It is a new substance called iron oxide. So rusting is a chemical change.

Rusting

Rusting is the slow chemical change in which iron reacts with oxygen (a gas in the air) and water (moisture). It forms reddish-brown rust, which is iron oxide.

Iron + Oxygen (from air) + Water → Rust (iron oxide)

Top: iron plus air (oxygen) plus water gives rust, which is iron oxide; a clean nail becomes a nail covered with reddish-brown patches. Bottom: three ways to keep air and water away from iron: a coat of paint, for gates and grills; a layer of oil or grease, for tools and chains; and a coating of zinc, for buckets and roof sheets.Iron+O₂Air(oxygen)+WaterRust(iron oxide)Keep air and water away:Paintgates, grillsOil or greasetools, chainsZinc coatingbuckets, roofs
Figure 4. What iron needs to rust, and three ways to stop it.

How rust is different from iron

IronRust
Grey and shiny when cleanReddish-brown and dull
Hard and strongFlaky and crumbly
Attracted by a magnetNot attracted strongly by a magnet

Rust flakes off, and the fresh iron below then rusts too. Over time the iron object becomes weak and may break. Iron rusts faster near the sea. This is because the air there is damp and carries salt, and both speed up rusting.

Keeping air and water away

Iron needs both oxygen and water to rust. So if we keep air and water away from it, it rusts much more slowly. Here are some ways (see Figure 4):

  • Paint gates and window grills.
  • Put oil or grease on tools, bicycle chains and machine parts.
  • Coat iron with a thin layer of another metal, zinc, as on many iron buckets and roof sheets.

Remember

  • Rusting needs iron, oxygen and water.
  • Rust (iron oxide) is a new substance, so rusting is a chemical change.
  • Paint, oil, grease or a zinc coating keep air and water away and slow rusting.
Quick checkWhy does an iron gate need to be painted from time to time?Show answer

Paint keeps air and moisture away from the iron, so it does not rust. When the paint wears off, the iron starts to rust.

5Combustion, ignition and the fire triangle

When wood, paper, coal, cooking gas or kerosene burn, they give out heat and light. Burning is a chemical change. New substances such as carbon dioxide, water vapour and ash are formed.

Combustion

Combustion is a chemical change in which a substance reacts with oxygen and gives out heat, and often light. In short, it is burning. Substances that can burn are combustible. Combustible substances that we burn to get heat, such as wood, coal, kerosene and LPG (cooking gas), are called fuels.

Burning magnesium

Magnesium is a light, silvery metal. Your teacher may hold a thin strip of it, called magnesium ribbon, in a flame with tongs. It burns with a dazzling white light. It turns into a white powder called magnesium oxide, which is a new substance.

Magnesium + Oxygen → Magnesium oxide

Only your teacher should burn magnesium. Never look straight at the bright flame.

Burning needs air

  1. Light two candles.
  2. Cover one candle with an upside-down glass tumbler.
  3. Watch both. The covered candle soon goes out. The other keeps burning.
Two lit candles on a table. The left candle is open to the air and keeps burning. The right candle is covered with an upside-down glass tumbler; after a short time its flame goes out and only a thin line of smoke rises from the wick.glass tumblerOpen to airKeeps burningCoveredGoes out
Figure 5. A candle covered with a tumbler goes out.

Why does the covered candle go out? Inside the tumbler the flame quickly uses up the oxygen. No fresh air can get in. Without oxygen, burning stops. If you test the gas left inside, it turns lime water milky. So carbon dioxide was formed.

This is why a person whose clothes catch fire is wrapped in a thick blanket or cotton cloth. The blanket cuts off the air, so the fire goes out. Clothes made from synthetic (factory-made) fibres such as nylon and polyester are dangerous near fire. They melt and stick to the skin.

Ignition temperature

A sheet of paper on your desk does not catch fire by itself. But it does when a lit matchstick touches it. Sunlight focused on paper with a magnifying glass can also set it on fire. Why? The paper burns only when it gets hot enough.

Ignition temperature

The ignition temperature of a substance is the lowest temperature at which it catches fire. A substance will not burn until it is heated to this temperature.

Different substances have different ignition temperatures. Petrol and LPG have a low ignition temperature, so they catch fire very easily. That is why they must be kept away from flames. Wood needs much more heat before it starts to burn. This is why you light a wood fire with paper first.

The fire triangle

The fire triangle. A fire burns on logs inside a triangle. Its left side stands for fuel (such as wood, paper, kerosene or LPG), its right side for oxygen from the air, and its base for heat that raises the fuel to its ignition temperature. All three are needed for burning.FUELwood, paper,kerosene, LPGOXYGENfrom the airO₂HEATup to the ignition temperature
Figure 6. The fire triangle: fuel, oxygen and heat.

A fire needs three things:

  1. a fuel (something to burn);
  2. oxygen (from the air);
  3. enough heat to bring the fuel to its ignition temperature.

Take away any one and the fire goes out. Water cools the burning material below its ignition temperature. Sand or a blanket cuts off the air.

Fireflies give out light through a chemical change in their bodies. Unlike a flame, this light gives off almost no heat.

Remember

  • Combustion: a substance reacts with oxygen and gives out heat and often light.
  • Ignition temperature: the lowest temperature at which a substance catches fire.
  • Fire needs fuel, oxygen and heat; remove any one to put it out.
Quick checkWhy does throwing sand on a small fire put it out?Show answer

Sand covers the burning material and cuts off its supply of air (oxygen). Without oxygen, combustion stops.

6A burning candle: both changes at once

Can one process have both physical and chemical changes? Watch a burning candle closely. The wick is the thread in the middle of the candle.

A burning candle with labels. Wax near the wick melts (physical change). The liquid wax rises up the wick (physical) and turns into vapour (physical). The wax vapour burns in the flame, giving heat, light, carbon dioxide and water vapour (chemical change). Wax dripping down the side becomes solid again (physical).Wax vapour burnsheat, light, CO₂, water vapourChemicalLiquid wax turnsinto vapourPhysicalWax near the wickmeltsPhysicalDripping waxbecomes solidPhysicalLiquid waxrises upthe wickPhysical
Figure 7. The changes in a burning candle.
  1. The heat of the flame melts the wax near the wick. Solid turns to liquid: a physical change.
  2. The liquid wax rises up the wick, just as tea soaks up into a biscuit dipped in it. This is a physical change.
  3. Near the flame the liquid wax turns into vapour (a gas). This is a physical change.
  4. The wax vapour burns in air. It gives heat, light, carbon dioxide and water vapour. These are new substances, so this is a chemical change.
  5. Wax that drips down the side cools and becomes solid again. This is a physical change.

So a burning candle shows both physical and chemical changes. Notice that the candle gets shorter as it burns. The wax that burns is used up and does not come back.

The scientist Michael Faraday once gave a famous set of talks for young people. He used only a candle to explain melting, vapour and burning.

Remember

  • Melting, rising up the wick, turning into vapour and setting again are physical changes.
  • Burning of wax vapour is a chemical change.
  • A burning candle shows both kinds of change.
Quick checkA candle is lit for an hour. Some wax has dripped and set on the table, and the candle is shorter. Which part of the lost wax went through a chemical change?Show answer

The wax that burnt in the flame (it became carbon dioxide and water vapour). The wax that dripped and set only melted and became solid again, which is a physical change.

7Reversible and irreversible changes

Some changes can be undone, and some cannot. You can freeze melted ice again. But you cannot turn a cooked roti back into flour and water.

Reversible and irreversible changes

A reversible change can be undone, so that we get back what we started with. An irreversible change cannot be undone.

Left: a reversible change. Ice melts into water, and the water can be frozen back into ice. Right: an irreversible change. When heated, maize grains pop into popcorn, and there is no way to turn the popcorn back into grains.ReversibleicemeltsfreezeswaterCan be undoneIrreversiblemaize grainsheatpopcornCannot be undone
Figure 8. Melting ice can be undone; popping maize cannot.
ReversibleIrreversible
Melting ice (freeze it again)Burning wood or paper
Water turning into vapour (condense it again)Cooking rice, idli or roti
Folding clothes, rolling up a matMaking popcorn
Blowing up a balloonChopping vegetables
Dissolving sugar in water (evaporate the water)Ripening of fruit

Physical does not always mean reversible

Many physical changes are reversible, but not all. Think of chopping vegetables or breaking a glass. No new substance is formed, so these are physical changes. Yet you cannot join the pieces back as they were. Most chemical changes, such as burning or cooking, are irreversible.

Remember

  • Reversible: can be undone (melting, freezing, folding, dissolving).
  • Irreversible: cannot be undone (burning, cooking, ripening, chopping).
  • Most chemical changes are irreversible; some physical changes are too.
Quick checkIs making popcorn from maize grains a reversible change?Show answer

No. The puffed popcorn cannot be turned back into hard maize grains. It is an irreversible change.

8Desirable and undesirable changes

Some changes are useful, and we make them happen on purpose. Others cause harm or loss, and we try to stop them.

Desirable and undesirable changes

A desirable change is one that is useful to us. An undesirable change is one that is harmful or causes loss.

DesirableUndesirable
Milk setting into curdIron tools and gates rusting
Fruits ripeningFood going bad (rotting) in storage
Cooking foodBread or pickle growing mould
Kitchen waste turning into compostSmoke and harmful gases from burning fuels

Mould is the fuzzy green, white or black growth you may see on stale bread. Compost is a dark, crumbly manure made when kitchen and garden waste rots.

It depends on where it happens

The same kind of change can be useful in one place and harmful in another. Vegetable peels rotting in a compost pit make useful manure. The same vegetables rotting in your kitchen basket are a waste.

Some useful activities also cause harm. Vehicles and factories burn fuels to do their work. But burning fuels gives out carbon dioxide, smoke and other gases that pollute the air. You can help reduce this harm:

  • Walk or cycle for short trips.
  • Share a vehicle, or use a bus or train.
  • Switch off engines and appliances when they are not needed.

Remember

  • Desirable: curd setting, ripening, cooking, composting.
  • Undesirable: rusting, food spoiling, pollution.
  • The same change can be desirable in one place and undesirable in another.
Quick checkWhy is the rotting of fruit desirable in a compost pit but undesirable in a fruit shop?Show answer

In a compost pit, rotting turns waste into manure that helps plants grow. In a shop, it spoils fruit that could have been eaten or sold.

Try it yourselfDecide whether each pictured change is physical or chemical, reversible or irreversible, and desirable or undesirable in the Change detective game.

9Slow natural changes: weathering and erosion

Not all changes are quick. Some changes in nature are so slow that we cannot see them happening in our lifetime.

Weathering

Weathering

Weathering is the slow breaking down of rocks into smaller pieces by natural causes. These causes include heat, cold, water, wind and plants. Over a very long time, weathering helps to form soil.

Three stages. First, rain water fills a narrow crack in a rock. Next, on a cold night the water freezes into ice, which takes up more room and pushes the sides of the crack apart. After this happens many times, the rock splits into pieces.Water fillsa crackIt freezes andtakes more roomAgain and again:the rock splits
Figure 9. Freezing water slowly splits a rock.

Physical weathering breaks rocks without changing what they are made of. It happens in these ways:

  • Freezing water. Water gets into a crack and freezes on a cold night. Ice takes up more room than water. (This is why a glass bottle full of water can crack in a freezer.) So the ice pushes the crack wider. After this happens many times, the rock splits.
  • Heating and cooling. Rocks heat up by day and cool down at night. Again and again, this makes their outer layers crack and peel off.
  • Plant roots. Roots grow into cracks and slowly push them apart. You may have seen a small plant growing out of a crack in an old wall.

Chemical weathering changes the substances in the rock. Rain water and gases in the air react with some of the materials in the rock. For example, some dark rocks contain iron. This iron slowly reacts, just like rusting, to form a reddish layer of iron oxide. The rock then becomes weak and crumbly.

Erosion

Erosion

Erosion is the carrying away of loose rock pieces and soil from one place to another by flowing water or wind.

Erosion by water. Rain falls from dark clouds on a sloping field. The water runs down the slope and carries bits of soil with it. At the bottom the muddy water flows into a river, where the soil settles on the river bed.RainWater runs down,carrying soilSoil settlesin the river
Figure 10. Rain water carries soil down a slope into a river.

You can see erosion when rain water runs down a slope and carries mud with it. A dust storm that blows soil off a dry field is erosion by wind.

Erosion is a physical change. The bits of soil and rock move, but they stay the same substance. It cannot be undone. The carried soil and rock settle somewhere else, for example at the bottom of a river or the sea. Over thousands of years, these layers can be pressed together into new rock.

Remember

  • Weathering breaks rocks down by physical and chemical changes and helps form soil.
  • Erosion carries soil and rock pieces away by water or wind.
  • Erosion is a slow, irreversible physical change.
Quick checkHow can water freezing in a crack break a big rock?Show answer

Water takes up more room when it freezes into ice. The ice pushes the sides of the crack apart. When this happens again and again, the crack grows until the rock splits.

Test yourselfTake the 16-question practice quiz on this chapter.