Chapter 3 · Chemistry

Metals and Non-metals

How metals and non-metals differ, how metals react with oxygen, water, acids and salt solutions, the reactivity series, how ionic compounds form, how metals are extracted and refined, and how corrosion is prevented and alloys are made.

Step-by-step answers to all 31 questions in this chapter of the NCERT textbook: the in-text questions after each section, and the exercises at the end. Each question is given exactly as it appears in the book.

In-text questions

3.1 Physical properties

  1. Q1
    Give an example of a metal which(i) is a liquid at room temperature.(ii) can be easily cut with a knife.(iii) is the best conductor of heat.(iv) is a poor conductor of heat.

    Answer

    (i) Mercury.

    (ii) Sodium (also lithium and potassium).

    (iii) Silver (copper is next).

    (iv) Lead (also mercury).

  2. Q2
    Explain the meanings of malleable and ductile.

    Answer

    Malleable: able to be beaten into thin sheets without breaking. Gold and silver are the most malleable metals; aluminium is beaten into foil.

    Ductile: able to be drawn into thin wires. Gold is the most ductile metal; copper and aluminium are drawn into electric wires.

In-text questions

3.2 Chemical properties of metals

  1. Q1
    Why is sodium kept immersed in kerosene oil?

    Answer

    Sodium is very reactive. In the open it reacts so vigorously with oxygen and with moisture in the air that it can catch fire:

    4Na(s) + O2(g) → 2Na2O(s)

    2Na(s) + 2H2O(l) → 2NaOH(aq) + H2(g) + heat energy

    Sodium does not react with kerosene. Keeping it under kerosene keeps air and moisture away, which protects the metal and prevents accidental fires.

  2. Q2
    Write equations for the reactions of(i) iron with steam(ii) calcium and potassium with water

    Answer

    (i) 3Fe(s) + 4H2O(g) → Fe3O4(s) + 4H2(g)

    (ii) Ca(s) + 2H2O(l) → Ca(OH)2(aq) + H2(g)

    2K(s) + 2H2O(l) → 2KOH(aq) + H2(g) + heat energy

  3. Q3
    Samples of four metals A, B, C and D were taken and added to the following solution one by one. The results obtained have been tabulated as follows.
    MetalIron(II) sulphateCopper(II) sulphateZinc sulphateSilver nitrate
    ANo reactionDisplacement
    BDisplacementNo reaction
    CNo reactionNo reactionNo reactionDisplacement
    DNo reactionNo reactionNo reactionNo reaction
    MetalResults
    AIron(II) sulphate: No reaction
    Copper(II) sulphate: Displacement
    BIron(II) sulphate: Displacement
    Zinc sulphate: No reaction
    CIron(II) sulphate: No reaction
    Copper(II) sulphate: No reaction
    Zinc sulphate: No reaction
    Silver nitrate: Displacement
    DIron(II) sulphate: No reaction
    Copper(II) sulphate: No reaction
    Zinc sulphate: No reaction
    Silver nitrate: No reaction
    Use the Table above to answer the following questions about metals A, B, C and D.(i) Which is the most reactive metal?(ii) What would you observe if B is added to a solution of Copper(II) sulphate?(iii) Arrange the metals A, B, C and D in the order of decreasing reactivity.

    Answer

    A metal displaces another metal from its salt solution only if it is more reactive.

    • B displaces iron, so B is more reactive than iron (but less reactive than zinc).
    • A does not displace iron but displaces copper, so A lies between iron and copper.
    • C displaces only silver, so C lies between copper and silver.
    • D displaces nothing, not even silver, so D is the least reactive.

    (i) B is the most reactive.

    (ii) B is more reactive than iron, and iron is more reactive than copper, so B displaces copper. The blue colour of the copper(II) sulphate solution fades, and a reddish-brown layer of copper forms on B.

    (iii) B > A > C > D

  4. Q4
    Which gas is produced when dilute hydrochloric acid is added to a reactive metal? Write the chemical reaction when iron reacts with dilute H2SO4.

    Answer

    Hydrogen gas is produced. It burns with a pop sound.

    Fe(s)+H2SO4(aq)→FeSO4(aq)iron(II) sulphate+H2(g)
  5. Q5
    What would you observe when zinc is added to a solution of iron(II) sulphate? Write the chemical reaction that takes place.

    Answer

    Zinc is more reactive than iron, so it displaces iron. The pale green colour of the solution fades (zinc sulphate solution is colourless), and a dark grey deposit of iron forms on the zinc.

    Zn(s)+FeSO4(aq)pale green→ZnSO4(aq)colourless+Fe(s)

In-text questions

3.3 How do metals and non-metals react?

  1. Q1
    (i) Write the electron-dot structures for sodium, oxygen and magnesium.(ii) Show the formation of Na2O and MgO by the transfer of electrons.(iii) What are the ions present in these compounds?

    Answer

    (i) Only the outer (valence) electrons are shown: sodium 2, 8, 1; oxygen 2, 6; magnesium 2, 8, 2.

    Electron-dot structures. Sodium has one outer electron, oxygen six and magnesium two, shown around each symbol.NaOMgSodium2, 8, 1Oxygen2, 6Magnesium2, 8, 2
    Electron-dot structures of sodium, oxygen and magnesium.

    (ii) Sodium oxide: each of two sodium atoms gives one electron to an oxygen atom.

    Na2, 8, 1→Na+2, 8+e−

    This happens for each of the two sodium atoms.

    O2, 6+2e−→O2−2, 8
    Electron-dot formation of sodium oxide. Each of two sodium atoms gives its one outer electron, shown as a dot, to an oxygen atom, which has six outer electrons shown as crosses. The products are two sodium ions, Na plus, and one oxide ion, O two minus, with eight outer electrons.NaNaO+Na+Na+O2−2, 8, 12, 8, 12, 62, 82, 82, 8
    Formation of sodium oxide by the transfer of electrons.

    Magnesium oxide: one magnesium atom gives two electrons to one oxygen atom.

    Mg2, 8, 2→Mg2+2, 8+2e−
    O2, 6+2e−→O2−2, 8
    Electron-dot formation of magnesium oxide. Magnesium gives its two outer electrons, shown as dots, to an oxygen atom, which has six outer electrons shown as crosses. The products are the magnesium ion, Mg two plus, and the oxide ion, O two minus, with eight outer electrons.Mg+OMg2+O2−2, 8, 22, 62, 82, 8magnesium ionoxide ion
    Formation of magnesium oxide by the transfer of electrons.

    (iii) Na2O: sodium ions, Na+, and oxide ions, O2− (two Na+ for each O2−). MgO: magnesium ions, Mg2+, and oxide ions, O2−.

  2. Q2
    Why do ionic compounds have high melting points?

    Answer

    In an ionic compound, the positive and negative ions are held together by strong electrostatic forces of attraction. A large amount of energy is needed to overcome these forces and separate the ions, so the compound melts only at a high temperature. For example, sodium chloride melts at 1074 K and calcium oxide at 2850 K.

In-text questions

3.4 Occurrence of metals

  1. Q1
    Define the following terms.(i) Mineral(ii) Ore(iii) Gangue

    Answer

    (i) Mineral: an element or a compound that occurs naturally in the earth’s crust.

    (ii) Ore: a mineral that contains a high percentage of a metal, from which the metal can be extracted profitably.

    (iii) Gangue: the impurities, such as soil and sand, present in an ore as it is mined. They are removed before the metal is extracted.

  2. Q2
    Name two metals which are found in nature in the free state.

    Answer

    Gold and silver (also platinum, and sometimes copper). They are at the bottom of the reactivity series, so they are very unreactive.

  3. Q3
    What chemical process is used for obtaining a metal from its oxide?

    Answer

    Reduction. For metals in the middle of the reactivity series, the oxide is heated with a reducing agent such as carbon (coke):

    ZnO(s)+C(s)→Zn(s)+CO(g)

    A more reactive metal can also be used, as in the thermit reaction. Oxides of the most reactive metals, such as aluminium oxide, are reduced by electrolysis of the molten compound (electrolytic reduction).

In-text questions

3.5 Corrosion

  1. Q1
    Metallic oxides of zinc, magnesium and copper were heated with the following metals.
    MetalZincMagnesiumCopper
    Zinc oxide
    Magnesium oxide
    Copper oxide
    Metal oxideHeated with
    Zinc oxideZinc
    Magnesium
    Copper
    Magnesium oxideZinc
    Magnesium
    Copper
    Copper oxideZinc
    Magnesium
    Copper
    In which cases will you find displacement reactions taking place?

    Answer

    A metal takes oxygen from the oxide of a less reactive metal. Order of reactivity: Mg > Zn > Cu.

    Oxide heated withZincMagnesiumCopper
    Zinc oxideNoYesNo
    Magnesium oxideNoNoNo
    Copper oxideYesYesNo

    Mg(s) + ZnO(s) → MgO(s) + Zn(s)

    Zn(s) + CuO(s) → ZnO(s) + Cu(s)

    Mg(s) + CuO(s) → MgO(s) + Cu(s)

  2. Q2
    Which metals do not corrode easily?

    Answer

    Metals low in the reactivity series, such as gold and platinum, do not corrode easily (silver corrodes only slowly, turning black). Aluminium and zinc also resist further corrosion, because a thin protective layer of oxide forms on their surface.

  3. Q3
    What are alloys?

    Answer

    An alloy is a homogeneous mixture of two or more metals, or of a metal and a non-metal. It is made by melting the main metal and dissolving the other elements in it in definite proportions.

    Examples: brass (copper and zinc), bronze (copper and tin), solder (lead and tin), stainless steel (iron, nickel and chromium), steel (iron and carbon).

End of chapter

Exercises

  1. Q1
    Which of the following pairs will give displacement reactions?(a) NaCl solution and copper metal(b) MgCl2 solution and aluminium metal(c) FeSO4 solution and silver metal(d) AgNO3 solution and copper metal.

    Answer

    (d) AgNO3 solution and copper metal.

    Copper is more reactive than silver, so it displaces silver:

    Cu(s)+2AgNO3(aq)→Cu(NO3)2(aq)+2Ag(s)

    In (a), (b) and (c) the metal is less reactive than the metal in the salt, so there is no reaction.

  2. Q2
    Which of the following methods is suitable for preventing an iron frying pan from rusting?(a) Applying grease(b) Applying paint(c) Applying a coating of zinc(d) All of the above.

    Answer

    (c) Applying a coating of zinc

    All three methods keep air and moisture away from iron, but a frying pan is heated again and again and touches food. Grease and paint would burn off and could get into the food. A thin coating of zinc (galvanising) stays on and keeps protecting the iron, even where it is scratched, because zinc is more reactive than iron.

  3. Q3
    An element reacts with oxygen to give a compound with a high melting point. This compound is also soluble in water. The element is likely to be(a) calcium(b) carbon(c) silicon(d) iron.

    Answer

    (a) calcium

    Calcium oxide is an ionic compound with a high melting point (2850 K), and it dissolves in water to form calcium hydroxide:

    2Ca(s)+O2(g)→2CaO(s)
    CaO(s)+H2O(l)→Ca(OH)2(aq)

    Carbon dioxide is a gas; silicon dioxide and the oxides of iron do not dissolve in water.

  4. Q4
    Food cans are coated with tin and not with zinc because(a) zinc is costlier than tin.(b) zinc has a higher melting point than tin.(c) zinc is more reactive than tin.(d) zinc is less reactive than tin.

    Answer

    (c) zinc is more reactive than tin.

    Zinc could react with the acids in food and form harmful compounds. Tin is less reactive, so it does not react with the food.

  5. Q5
    You are given a hammer, a battery, a bulb, wires and a switch.(a) How could you use them to distinguish between samples of metals and non-metals?(b) Assess the usefulness of these tests in distinguishing between metals and non-metals.

    Answer

    (a) Hammer test: beat each sample with the hammer. A metal flattens into a sheet (it is malleable). A solid non-metal breaks into pieces (it is brittle).

    Conduction test: join the battery, bulb and switch with wires, leaving a gap. Put each sample in the gap and close the switch. If the bulb glows, the sample conducts electricity: it is a metal. If not, it is a non-metal.

    A battery, a switch and a bulb are joined in a circuit that ends in two clips, A and B. A strip of metal is placed between the clips. When the switch is closed the bulb glows: the metal conducts electricity.BatterySwitchBulb glowsABMetal to be tested, between clips A and B
    Testing a sample for electrical conduction.

    (b) The tests are useful and quick, but not conclusive, because there are exceptions. Graphite, a non-metal, conducts electricity. Mercury, a metal, is a liquid and cannot be hammered; sodium and potassium are soft. Diamond is a very hard non-metal. A chemical test, such as whether the oxide is basic or acidic, is more reliable.

  6. Q6
    What are amphoteric oxides? Give two examples of amphoteric oxides.

    Answer

    Metal oxides that react with both acids and bases to give a salt and water are called amphoteric oxides.

    Examples: aluminium oxide, Al2O3, and zinc oxide, ZnO.

    Al2O3with an acid+6HCl→2AlCl3+3H2O
    Al2O3with a base+2NaOH→2NaAlO2sodium aluminate+H2O
    ZnO+2HCl→ZnCl2+H2O
    ZnO+2NaOH→Na2ZnO2sodium zincate+H2O
  7. Q7
    Name two metals which will displace hydrogen from dilute acids, and two metals which will not.

    Answer

    Displace hydrogen: magnesium and zinc (also aluminium and iron). They are above hydrogen in the reactivity series.

    Do not: copper and silver (also gold). They are below hydrogen.

    Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)
  8. Q8
    In the electrolytic refining of a metal M, what would you take as the anode, the cathode and the electrolyte?

    Answer

    Anode: a block of the impure metal M.

    Cathode: a thin strip of the pure metal M.

    Electrolyte: a solution of a soluble salt of M (for copper, acidified copper sulphate).

    On passing the current, pure M dissolves from the anode and is deposited on the cathode. Insoluble impurities settle below the anode as anode mud.

    Electrolytic refining of copper. A tank holds acidified copper sulphate solution. The anode, joined to the positive terminal, is a block of impure copper; the cathode, joined to the negative terminal, is a thin strip of pure copper. Copper ions move from the anode side to the cathode, where pure copper is deposited. Insoluble impurities collect below the anode as anode mud.−+Cu2+Cu2+Cu2+Battery and keyCathode (−):thin strip ofpure copperPure copperis depositedhereAnode (+):impurecopperAcidifiedcoppersulphatesolutionAnode mud(insolubleimpurities)Tank
    Electrolytic refining, with copper as the metal M.
  9. Q9
    Pratyush took sulphur powder on a spatula and heated it. He collected the gas evolved by inverting a test tube over it, as shown in figure below.(a) What will be the action of gas on(i) dry litmus paper?(ii) moist litmus paper?(b) Write a balanced chemical equation for the reaction taking place.
    Sulphur powder on a spatula is heated over a burner. A test tube, held upside down with tongs, collects the gas given off, sulphur dioxide.Test tubeheld upside downSulphurdioxide gasSpatula withsulphur powderBurnerTongs
    Collection of gas

    Answer

    The gas is sulphur dioxide, an acidic oxide.

    (a) (i) No change in dry litmus paper: without water, sulphur dioxide does not form an acid.

    (ii) Moist blue litmus turns red: sulphur dioxide dissolves in the water to form sulphurous acid.

    (b) S(s) + O2(g) → SO2(g)

    With the water in moist litmus: SO2(g) + H2O(l) → H2SO3(aq)

  10. Q10
    State two ways to prevent the rusting of iron.

    Answer

    (1) Painting (or oiling or greasing) the iron, which keeps air and moisture away.

    (2) Galvanising: coating the iron with a thin layer of zinc. (Alloying, as in stainless steel, and chrome plating also work.)

  11. Q11
    What type of oxides are formed when non-metals combine with oxygen?

    Answer

    Acidic oxides, which dissolve in water to give acids: for example sulphur dioxide and carbon dioxide.

    SO2 + H2O → H2SO3

    CO2 + H2O → H2CO3

    Some non-metal oxides are neutral, for example carbon monoxide, CO, and dinitrogen oxide, N2O.

  12. Q12
    Give reasons(a) Platinum, gold and silver are used to make jewellery.(b) Sodium, potassium and lithium are stored under oil.(c) Aluminium is a highly reactive metal, yet it is used to make utensils for cooking.(d) Carbonate and sulphide ores are usually converted into oxides during the process of extraction.

    Answer

    (a) They are lustrous, very malleable and ductile, and very unreactive: they do not corrode, so they keep their shine for a long time.

    (b) They are so reactive that they react vigorously with oxygen and moisture in the air and can catch fire. Oil keeps air and moisture away from them.

    (c) Aluminium is quickly covered by a thin, tough layer of aluminium oxide that stops further reaction. It is also light, a good conductor of heat, and does not melt on a stove.

    (d) It is easier to obtain a metal from its oxide (by reduction with carbon) than from its sulphide or carbonate. Sulphide ores are roasted and carbonate ores calcined to give the oxide:

    2ZnS(s)+3O2(g)Heat gives 2ZnO(s)+2SO2(g)

    Roasting.

    ZnCO3(s)Heat gives ZnO(s)+CO2(g)

    Calcination.

  13. Q13
    You must have seen tarnished copper vessels being cleaned with lemon or tamarind juice. Explain why these sour substances are effective in cleaning the vessels.

    Answer

    The dull layer on tarnished copper is mainly basic copper carbonate, CuCO3·Cu(OH)2 (green), with some copper(II) oxide. These are basic.

    Lemon and tamarind juice contain acids (citric and tartaric acid). The acids react with the basic layer and neutralise it, forming copper salts that dissolve and wash away (carbon dioxide and water also form). The shiny copper underneath is seen again.

  14. Q14
    Differentiate between metal and non-metal on the basis of their chemical properties.

    Answer

    Chemical propertyMetalsNon-metals
    Nature of oxidesBasic (some, such as Al2O3 and ZnO, are amphoteric)Acidic or neutral
    Ions formedLose electrons: positive ions (cations)Gain electrons: negative ions (anions)
    Dilute acidsMetals above hydrogen displace hydrogenDo not displace hydrogen
    With hydrogenMost do not reactForm hydrides, such as H2S and NH3
    Behaviour in reactionsReducing agents (give electrons)Oxidising agents (take electrons)

    Metal oxide (basic): MgO + H2O → Mg(OH)2

    Non-metal oxide (acidic): SO2 + H2O → H2SO3

  15. Q15
    A man went door to door posing as a goldsmith. He promised to bring back the glitter of old and dull gold ornaments. An unsuspecting lady gave a set of gold bangles to him which he dipped in a particular solution. The bangles sparkled like new but their weight was reduced drastically. The lady was upset but after a futile argument the man beat a hasty retreat. Can you play the detective to find out the nature of the solution he had used?

    Answer

    He used aqua regia: a freshly prepared mixture of concentrated hydrochloric acid and concentrated nitric acid in the ratio 3 : 1.

    Aqua regia can dissolve gold. It dissolved the dull outer layer of the bangles, exposing a fresh, shiny surface. The gold that dissolved stayed in the solution, so the bangles lost a lot of weight.

  16. Q16
    Give reasons why copper is used to make hot water tanks and not steel (an alloy of iron).

    Answer

    (1) Copper does not react with water, even when hot, so the tank does not corrode. Iron in steel rusts in contact with water and air, and reacts with steam:

    3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)

    (2) Copper is a better conductor of heat than steel, so the water heats up quickly.

Revising for the board exam?Get the Chapter 3 revision PDF: quick notes, 20 new board-pattern questions and full answers, for ₹49.