In this chapter 13 topics
- 1Bonding in carbon: the covalent bond
- 2Allotropes of carbon
- 3Why carbon forms so many compounds
- 4Saturated and unsaturated compounds
- 5Chains, branches, rings and isomers
- 6Functional groups
- 7Homologous series
- 8Naming carbon compounds
- 9Combustion and flames
- 10Oxidation, addition and substitution
- 11Ethanol
- 12Ethanoic acid
- 13Soaps and detergents
1Bonding in carbon: the covalent bond
Carbon has atomic number 6, so its electrons are arranged 2, 4. It has 4 valence electrons and needs 4 more for an octet.
Why carbon does not form ions
- Gaining 4 electrons to form C4− is hard: a nucleus with only 6 protons cannot hold 10 electrons.
- Losing 4 electrons to form C4+ needs a very large amount of energy.
- So carbon shares its valence electrons with other atoms. Each shared electron counts for both atoms, so both reach a noble gas arrangement.
Covalent bond
A bond formed by the sharing of a pair of electrons between two atoms. One shared pair is a single bond (–), two pairs a double bond (=), three pairs a triple bond (≡).
In an electron-dot structure, only the outer (valence) electrons are shown, as dots or crosses. A shared pair sits between the two atoms.
Simple molecules with covalent bonds
| Molecule | Shared pairs | Bond |
|---|---|---|
| H2, Cl2, F2 | 1 | Single: H–H, Cl–Cl |
| O2 | 2 | Double: O=O |
| N2 | 3 | Triple: N≡N |
| CH4, H2O, NH3 | 1 per bond | Single bonds only |
Methane is a major part of biogas and CNG (compressed natural gas) and is widely used as a fuel.
Properties of covalent compounds
| Compound | Melting point (K) | Boiling point (K) |
|---|---|---|
| Acetic acid, CH3COOH | 290 | 391 |
| Chloroform, CHCl3 | 209 | 334 |
| Ethanol, CH3CH2OH | 156 | 351 |
| Methane, CH4 | 90 | 111 |
- Low melting and boiling points. The bonds inside each molecule are strong, but the forces between molecules are weak.
- Poor conductors of electricity. Electrons are shared, so no ions (charged particles) are formed.
| Property | Ionic compounds | Covalent compounds |
|---|---|---|
| Bond formed by | Transfer of electrons | Sharing of electrons |
| Melting and boiling points | High | Low |
| Conduct electricity? | Yes, when molten or in solution | Generally no |
| Example | NaCl, MgO | CH4, H2O |
Remember
- Carbon: 2, 4. It shares electrons; it does not form C⁴⁺ or C⁴⁻ ions.
- Single bond: 1 shared pair; double: 2 pairs; triple: 3 pairs.
- Covalent compounds: low melting and boiling points, poor conductors.
Quick checkHow many electrons are shared in a molecule of nitrogen, and what kind of bond is it?Show answer
Six electrons (three shared pairs): a triple bond, N≡N.
2Allotropes of carbon
Allotropes
Different forms of the same element with different physical properties. The main allotropes of carbon are diamond, graphite and fullerenes. They differ only in how the carbon atoms are bonded to one another.
| Diamond | Graphite | |
|---|---|---|
| Bonding | Each C bonded to 4 other C atoms | Each C bonded to 3 other C atoms in the same plane; one of these is a double bond |
| Structure | Rigid three-dimensional network | Flat hexagonal layers placed one above another |
| Hardness | Hardest natural substance | Soft, smooth and slippery |
| Electricity | Does not conduct | Good conductor (unusual for a non-metal) |
| Uses | Cutting and drilling tools, jewellery | Pencil leads, electrodes, lubricant |
- Diamond and graphite have different physical properties but the same chemical properties: both burn in oxygen to give only carbon dioxide.
- Synthetic diamonds are made by putting pure carbon under very high pressure and temperature. They are small but otherwise the same as natural diamonds.
- Fullerenes: the first one found was C-60, a football-shaped molecule of 60 carbon atoms. It is named after the architect Buckminster Fuller, whose geodesic domes it resembles (buckminsterfullerene).
Remember
- Allotropes of carbon: diamond, graphite, fullerene (C-60).
- Diamond: 4 bonds per atom, 3-D, hardest, non-conductor.
- Graphite: 3 bonds per atom, layers, slippery, conducts electricity.
Quick checkWhy does graphite conduct electricity but diamond does not?Show answer
In graphite, each carbon atom is bonded to only three others in its layer. So the layers have electrons that are free to move and carry a current. In diamond, all four valence electrons of each atom are held in bonds, so none are free.
3Why carbon forms so many compounds
Millions of carbon compounds are known: more than the compounds of all other elements put together. Two properties explain this.
Catenation
The ability of carbon to form bonds with other carbon atoms, giving long chains, branched chains and rings. Carbon atoms may be joined by single, double or triple bonds.
Tetravalency
Carbon has a valency of 4. It can bond with four other atoms: carbon, or atoms of other elements such as hydrogen, oxygen, nitrogen, sulphur and chlorine.
- Catenation: no other element does this to the same extent. Silicon forms chains of only 7 or 8 atoms with hydrogen, and these compounds are very reactive.
- Strong C–C bond: the carbon–carbon bond is very strong, so long chains are stable.
- Small size: the carbon nucleus holds the shared electron pairs strongly, so carbon forms strong bonds with most elements. Bigger atoms form weaker bonds.
- The other atoms attached to the chain give each compound its own properties.
Organic compounds
- Carbon compounds were first taken from living things. People believed a “vital force” in living systems was needed to make them, so they were called organic compounds.
- In 1828, Friedrich Wöhler made urea from ammonium cyanate in the laboratory. This disproved the vital force idea.
- Carbon compounds are still studied as organic chemistry, except carbides, oxides of carbon, carbonates and hydrogencarbonates.
- The earth’s crust has only 0.02% carbon (in carbonates, hydrogencarbonates, coal and petroleum). The air has 0.03% carbon dioxide.
- Yet food, clothes, medicines, fuels and all living things are based on carbon.
Remember
- Two reasons for the huge number of carbon compounds: catenation and tetravalency.
- C–C bonds are strong because carbon atoms are small.
- Wöhler (1828): urea from ammonium cyanate.
Quick checkName the two properties of carbon that lead to the huge number of carbon compounds.Show answer
Catenation (bonding with other carbon atoms into chains and rings) and tetravalency (a valency of four).
4Saturated and unsaturated compounds
Drawing a structural formula
- Join the carbon atoms in a chain with single bonds.
- Add hydrogen atoms so that every carbon has 4 bonds and every hydrogen 1 bond.
- If a carbon still has a free valency, put a double or triple bond between carbon atoms.
Saturated compounds
Carbon compounds with only single bonds between carbon atoms. Examples: methane, ethane, propane. They are normally not very reactive.
Ethene and ethyne
Ethene, C2H4
Ethyne, C2H2
Unsaturated compounds
Carbon compounds with a double or triple bond between carbon atoms. Examples: ethene (C=C), ethyne (C≡C). They are more reactive than saturated compounds.
| Saturated | Unsaturated | |
|---|---|---|
| Carbon–carbon bonds | Single bonds only | At least one double or triple bond |
| Reactivity | Not very reactive | More reactive (show addition reactions) |
| Flame | Generally clean (blue) flame | Yellow, sooty flame |
| Examples | CH4, C2H6, C3H8 | C2H4, C3H6, C2H2 |
Remember
- Every C has 4 bonds, every H 1, every O 2.
- Saturated: only C–C single bonds. Unsaturated: C=C or C≡C.
- Ethane C₂H₆ (single), ethene C₂H₄ (double), ethyne C₂H₂ (triple).
Quick checkHow many covalent bonds are there in a molecule of ethane?Show answer
Seven: one C–C bond and six C–H bonds.
5Chains, branches, rings and isomers
Straight chains: the first six alkanes
Methane, CH4
Ethane, C2H6
Propane, C3H8
Butane, C4H10
Pentane, C5H12
Hexane, C6H14
| Carbon atoms | Name | Formula | Condensed formula |
|---|---|---|---|
| 1 | Methane | CH4 | CH4 |
| 2 | Ethane | C2H6 | CH3CH3 |
| 3 | Propane | C3H8 | CH3CH2CH3 |
| 4 | Butane | C4H10 | CH3CH2CH2CH3 |
| 5 | Pentane | C5H12 | CH3(CH2)3CH3 |
| 6 | Hexane | C6H14 | CH3(CH2)4CH3 |
Branches: structural isomers
Four carbon atoms can be joined in two ways: a straight chain, or a chain of three with a branch.
Structural isomers
Compounds with the same molecular formula but different structures. Example: butane and 2-methylpropane (isobutane), both C4H10. Isomers are possible only from 4 carbon atoms upwards (for alkanes).
Rings
- A ring has 2 fewer hydrogen atoms than the open chain with the same carbons. Cyclohexane is C6H12; hexane is C6H14.
- Straight chains, branched chains and rings may all be saturated or unsaturated.
Hydrocarbons
Hydrocarbons
Compounds of carbon and hydrogen only. Saturated hydrocarbons are alkanes; unsaturated ones with a double bond are alkenes, and with a triple bond alkynes.
Remember
- Carbon chains can be straight, branched or ring-shaped.
- Structural isomers: same molecular formula, different structures (butane and isobutane).
- Alkanes CnH2n+2; alkenes CnH2n; alkynes CnH2n−2.
Quick checkCyclohexane and hexene both have the formula C6H12. Are they saturated or unsaturated?Show answer
Cyclohexane is saturated (a ring with single bonds only). Hexene is unsaturated (it has a C=C double bond). They are isomers.
6Functional groups
Heteroatom
An atom other than carbon and hydrogen (such as Cl, Br, O, N, S) that replaces a hydrogen atom in a hydrocarbon chain. The valency of carbon stays satisfied.
Functional group
An atom or group of atoms that gives a carbon compound its characteristic chemical properties, whatever the length of the carbon chain. It is attached to the chain in place of one (or more) hydrogen atoms.
Halo: –Cl, –Br
Alcohol: –OH
Aldehyde: –CHO
Ketone: –CO–
Carboxylic acid: –COOH
| Heteroatom | Class of compounds | Functional group | Example |
|---|---|---|---|
| Cl or Br | Haloalkane (chloro-/bromoalkane) | –Cl, –Br (in place of H) | CH3Cl, chloromethane |
| Oxygen | Alcohol | –OH | C2H5OH, ethanol |
| Oxygen | Aldehyde | –CHO | CH3CHO, ethanal |
| Oxygen | Ketone | –CO– (C=O inside the chain) | CH3COCH3, propanone |
| Oxygen | Carboxylic acid | –COOH | CH3COOH, ethanoic acid |
- In an aldehyde the C=O group is at the end of the chain (the carbon also carries an H).
- In a ketone the C=O group is inside the chain, with carbon on both sides. So the smallest ketone has 3 carbon atoms.
- The carbon atom of –CHO and –COOH is counted as part of the carbon chain.
Remember
- Functional group = the part of the molecule that decides its chemical properties.
- –OH alcohol; –CHO aldehyde; –CO– ketone; –COOH carboxylic acid; –Cl/–Br halo.
- Aldehyde: C=O at the end. Ketone: C=O in the middle.
Quick checkName the functional group in (a) CH3CH2CHO and (b) CH3COCH3.Show answer
(a) Aldehyde, –CHO. (b) Ketone, –CO–.
7Homologous series
Homologous series
A family of carbon compounds with the same functional group, in which each member differs from the next by a –CH2– unit. Example: methanol, ethanol, propanol, butanol.
Methanol, CH3OH
Ethanol, C2H5OH
Propanol, C3H7OH
Butanol, C4H9OH
Features of a homologous series
- All members have the same functional group and the same general formula.
- Successive members differ by CH2, that is, by 14 u in molecular mass (12 u + 2 × 1 u).
- Physical properties change gradually (a gradation): melting point, boiling point and solubility change as the molecular mass increases.
- Chemical properties are similar, because they are decided by the functional group.
| Alkane | Formula | Molecular mass (u) | Difference |
|---|---|---|---|
| Methane | CH4 | 12 + 4 = 16 | |
| Ethane | C2H6 | 24 + 6 = 30 | 14 u (CH2) |
| Propane | C3H8 | 36 + 8 = 44 | 14 u (CH2) |
| Butane | C4H10 | 48 + 10 = 58 | 14 u (CH2) |
General formulae
| Series | General formula | First members |
|---|---|---|
| Alkanes | CnH2n+2 | CH4, C2H6, C3H8, C4H10 |
| Alkenes (n ≥ 2) | CnH2n | C2H4, C3H6, C4H8, C5H10 |
| Alkynes (n ≥ 2) | CnH2n−2 | C2H2, C3H4, C4H6 |
| Alcohols | CnH2n+1OH | CH3OH, C2H5OH, C3H7OH, C4H9OH |
Series for the other functional groups (up to 4 carbons)
| Series | Group | Members with 1 to 4 carbon atoms |
|---|---|---|
| Haloalkanes | –Cl | Chloromethane CH3Cl, chloroethane C2H5Cl, chloropropane C3H7Cl, chlorobutane C4H9Cl |
| Aldehydes | –CHO | Methanal HCHO, ethanal CH3CHO, propanal C2H5CHO, butanal C3H7CHO |
| Ketones | –CO– | Start at 3 carbons: propanone CH3COCH3, butanone CH3COC2H5 |
| Carboxylic acids | –COOH | Methanoic acid HCOOH, ethanoic acid CH3COOH, propanoic acid C2H5COOH, butanoic acid C3H7COOH |
Worked example 1
Find the difference in formula and in molecular mass between C2H5OH and C3H7OH (C = 12 u, H = 1 u, O = 16 u).
Solution
They differ by CH2, which is 14 u. The same is true for CH3OH and C2H5OH, and for C3H7OH and C4H9OH.
Remember
- Homologous series: same functional group; next member + CH₂ (14 u).
- Physical properties change gradually; chemical properties stay similar.
- Alkanes CnH2n+2, alkenes CnH2n, alkynes CnH2n−2.
Quick checkThe first member of the alkene series is ethene. Write the formula of its next two members.Show answer
Using CnH2n: propene, C3H6, and butene, C4H8.
8Naming carbon compounds
Names follow the IUPAC system. A name has a word root for the number of carbon atoms, and a prefix (in front) or a suffix (at the end) for the functional group.
| Carbon atoms | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
| Word root | meth | eth | prop | but | pent | hex |
Rules
- Count the carbon atoms in the chain (including the carbon of –CHO or –COOH). Three carbons: propane.
- Show the functional group by a prefix or a suffix (table below).
- If the suffix starts with a vowel (a, e, i, o, u), drop the final “e” of the chain name: propan
e+ one = propanone. - For an unsaturated chain, change “ane” to “ene” (double bond) or “yne” (triple bond): propene, propyne.
| Class of compound | Prefix or suffix | Example |
|---|---|---|
| Haloalkane | Prefix: chloro-, bromo- | Chloropropane, bromopropane |
| Alcohol | Suffix: -ol | Propanol |
| Aldehyde | Suffix: -al | Propanal |
| Ketone | Suffix: -one | Propanone |
| Carboxylic acid | Suffix: -oic acid | Propanoic acid |
| Alkene | Suffix: -ene | Propene |
| Alkyne | Suffix: -yne | Propyne |
Haloalkane · prefix chloro-
Chloropropane
Haloalkane · prefix bromo-
Bromopropane
Alcohol · suffix -ol
Propanol
Aldehyde · suffix -al
Propanal
Ketone · suffix -one
Propanone
Carboxylic acid · suffix -oic acid
Propanoic acid
Alkene · suffix -ene
Propene
Alkyne · suffix -yne
Propyne
Worked example 2
Name: (a) CH3CH2CH2CHO; (b) CH3COCH2CH3; (c) CH3CH2Br; (d) HCOOH.
Solution
- (a) 4 carbons (but-), aldehyde (-al): butan
e+ al. - (b) 4 carbons, ketone (-one): butan
e+ one. - (c) 2 carbons, bromo- prefix: bromo + ethane.
- (d) 1 carbon, carboxylic acid: methan
e+ oic acid.
(a) Butanal (b) Butanone (c) Bromoethane (d) Methanoic acid
Remember
- Root: meth 1, eth 2, prop 3, but 4, pent 5, hex 6.
- Halo: prefix. -ol alcohol, -al aldehyde, -one ketone, -oic acid, -ene, -yne: suffixes.
- Drop the final “e” before a suffix that starts with a vowel.
Quick checkWhat is the name of the compound CH3CH2CH2CH2OH?Show answer
Butanol: four carbon atoms (but-) and an –OH group (-ol).
9Combustion and flames
Combustion
Burning a substance in oxygen, giving out heat and light. Carbon, in all its allotropic forms, burns to give carbon dioxide. Most carbon compounds burn to give carbon dioxide and water.
Combustion is an oxidation reaction. It releases a large amount of energy, which is why carbon and its compounds are our main fuels.
Clean and sooty flames (Activities 4.3 and 4.4)
| Fuel or condition | Flame | Reason |
|---|---|---|
| Saturated hydrocarbons, enough air | Clean, blue flame | Complete combustion |
| Unsaturated compounds (e.g. naphthalene, camphor) | Yellow flame with black smoke; soot on a metal plate held above | Incomplete combustion |
| Any fuel with limited air | Yellow, sooty flame | Not enough oxygen: incomplete combustion |
- Gas and kerosene stoves have air holes, so an oxygen-rich mixture burns with a clean blue flame.
- Blackened vessel bottoms mean the air holes are blocked: the fuel is not burning completely, and fuel is wasted.
- Coal and petroleum contain some nitrogen and sulphur. Burning them gives oxides of sulphur and nitrogen, which are major pollutants.
Flame or no flame?
- A flame forms only when gases burn. Wood or charcoal first gives off volatile substances, which burn with a flame. Later, charcoal only glows red without a flame.
- A luminous (glowing) flame forms when atoms in the gas are heated and glow. Each element glows with its own colour.
- The yellow colour of a candle flame comes from tiny particles of unburnt carbon (soot) glowing in the heat.
Fossil fuels
- Coal: remains of trees, ferns and other plants from millions of years ago, buried and pressed under layers of earth and rock.
- Petroleum and natural gas: remains of tiny sea plants and animals, covered by silt and turned into oil and gas by bacteria under high pressure. The oil and gas collect in porous rock.
- They are called fossil fuels because they formed from the remains of living things over millions of years.
Welding: a mixture of ethyne and oxygen is burnt, not ethyne and air. Pure oxygen gives complete combustion and a very hot flame (about 3000 °C) that melts metals. In air, there is less oxygen (air is mostly nitrogen), so ethyne burns incompletely with a sooty, cooler flame.
Remember
- Combustion: fuel + oxygen → CO₂ + H₂O + heat and light.
- Blue flame: complete combustion. Yellow sooty flame: incomplete combustion or unsaturated fuel.
- Flames come only from burning gases; soot makes a candle flame yellow.
Quick checkThe bottom of a cooking vessel is getting black. What does it mean, and what should be done?Show answer
The fuel is not burning completely (soot is forming). The air holes of the stove are blocked; they should be cleaned so enough air reaches the flame.
10Oxidation, addition and substitution
Oxidation
Besides burning (complete oxidation), alcohols can be oxidised to carboxylic acids.
Oxidising agent
A substance that adds oxygen to another substance. Examples: alkaline potassium permanganate (KMnO4) and acidified potassium dichromate (K2Cr2O7).
Activity 4.5: warm ethanol and add 5% alkaline KMnO4 drop by drop.
- At first the purple colour disappears: KMnO4 is used up as it oxidises the ethanol.
- Once all the ethanol has been oxidised, extra KMnO4 is not used up, so the purple colour stays.
Addition reaction
Addition reaction
A reaction in which an unsaturated compound adds a molecule (such as hydrogen) across its double or triple bond, giving a saturated compound.
Catalyst
A substance that makes a reaction happen, or changes its rate, without itself being used up. Nickel and palladium catalyse the addition of hydrogen.
- Hydrogenation of vegetable oils: oils have long unsaturated chains. Adding hydrogen with a nickel catalyst turns them into solid saturated fats (vanaspati ghee).
- Animal fats contain saturated fatty acids, said to be harmful to health. Oils with unsaturated fatty acids are better for cooking.
- Test for unsaturation: an unsaturated compound decolourises bromine water (reddish-brown) by addition; a saturated compound does not.
Substitution reaction
Substitution reaction
A reaction in which one atom (or group of atoms) takes the place of another. Saturated hydrocarbons are unreactive, but in sunlight chlorine replaces their hydrogen atoms one by one, in a very fast reaction.
With more chlorine, the other hydrogen atoms are replaced too: CH3Cl + Cl2 → CH2Cl2 + HCl, then CHCl3 and CCl4. With higher alkanes a number of products usually form.
| Reaction | Happens with | Condition | Example |
|---|---|---|---|
| Combustion | Most carbon compounds | Oxygen, ignition | Methane → CO2 + H2O |
| Oxidation | Alcohols | Alkaline KMnO4 or acidified K2Cr2O7, heat | Ethanol → ethanoic acid |
| Addition | Unsaturated compounds | Ni or Pd catalyst (for H2) | Ethene → ethane |
| Substitution | Saturated hydrocarbons | Sunlight (for Cl2) | Methane → chloromethane |
Remember
- Oxidation: ethanol → ethanoic acid (alkaline KMnO₄ or acidified K₂Cr₂O₇).
- Addition: unsaturated + H₂ → saturated (Ni/Pd catalyst); used to hydrogenate oils.
- Substitution: CH₄ + Cl₂ → CH₃Cl + HCl in sunlight.
Quick checkWhy is the conversion of ethanol to ethanoic acid called an oxidation reaction?Show answer
Ethanol gains oxygen (and loses hydrogen): CH3CH2OH becomes CH3COOH. Gaining oxygen is oxidation.
11Ethanol
Ethanol, C2H5OH or CH3CH2OH
Properties and uses
- A liquid at room temperature (melting point 156 K, boiling point 351 K).
- Soluble in water in all proportions. It is a good solvent, used in medicines such as tincture of iodine, cough syrups and tonics.
- Commonly called alcohol: the active ingredient of all alcoholic drinks.
- Pure ethanol is called absolute alcohol. Even a small amount of it can be lethal.
- Neutral to litmus. It does not react with sodium hydrogencarbonate.
Reactions of ethanol
1. With sodium (Activity 4.6, teacher’s demonstration): a small piece of sodium in absolute alcohol gives bubbles of hydrogen, which burns with a pop. The other product is sodium ethoxide.
2. Dehydration: heating ethanol at 443 K with excess concentrated sulphuric acid removes water and gives ethene. Concentrated sulphuric acid acts as a dehydrating agent.
3. Oxidation to ethanoic acid, and 4. combustion with a clean blue flame (topics 9 and 10).
Harmful effects of alcohol
- Large amounts of ethanol slow down metabolism and depress the central nervous system: lack of coordination, mental confusion, drowsiness, lowered inhibitions, and finally stupor. Judgement and muscle control are seriously affected.
- Long-term drinking leads to many health problems.
- Methanol is far more dangerous: even very small amounts can cause death. In the liver it is oxidised to methanal, which reacts quickly with cell components and coagulates the protoplasm (like an egg being cooked). Methanol also damages the optic nerve, causing blindness.
Denatured alcohol
Ethanol for industrial use made unfit for drinking by adding poisonous substances such as methanol. A blue dye is also added so that it can be recognised easily.
Alcohol as a fuel
- Sugarcane converts sunlight into chemical energy very efficiently. Its juice gives molasses, which is fermented to give ethanol.
- Ethanol is added to petrol in some countries: it is a cleaner fuel, giving only carbon dioxide and water when burnt in enough air.
Remember
- Ethanol: liquid, mixes with water in all proportions, good solvent, neutral.
- Ethanol + Na → sodium ethoxide + H₂. Hot conc. H₂SO₄ at 443 K → ethene + water.
- Methanol is poisonous (blindness, death). Denatured alcohol = ethanol + methanol + blue dye.
Quick checkWhat is seen when a small piece of sodium is dropped into ethanol? How would you test the gas?Show answer
The sodium reacts and bubbles of gas are given off. Bring a burning splinter near the mouth of the tube: the gas burns with a pop, so it is hydrogen.
12Ethanoic acid
Ethanoic acid, CH3COOH
Properties
- Commonly called acetic acid. It belongs to the carboxylic acids.
- Vinegar is a 5–8% solution of acetic acid in water, used as a preservative in pickles.
- Melting point 290 K (17 °C), so pure ethanoic acid often freezes in cold winters: it is called glacial acetic acid.
- Carboxylic acids are weak acids: unlike mineral acids such as HCl, they are not completely ionised.
Activity 4.7: both dilute acetic acid and dilute hydrochloric acid turn blue litmus red. Universal indicator shows a higher pH (less acidic) for acetic acid than for hydrochloric acid of the same strength, so acetic acid is the weaker acid.
1. Esterification (Activity 4.8)
- Take 1 mL ethanol (absolute alcohol), 1 mL glacial acetic acid and a few drops of concentrated sulphuric acid in a test tube.
- Warm the tube in a water bath for at least five minutes (Figure 30).
- Pour the mixture into 20–50 mL of water and smell it: a sweet, fruity smell shows an ester has formed.
Esterification
The reaction of a carboxylic acid with an alcohol, in the presence of an acid catalyst (concentrated sulphuric acid), to give an ester and water. Esters are sweet-smelling: used in perfumes and as flavouring agents.
2. Saponification
Saponification
Heating an ester with sodium hydroxide (an alkali) gives back the alcohol and the sodium salt of the carboxylic acid. It is used to make soap.
3. With a base
Like mineral acids, ethanoic acid reacts with a base to give a salt and water.
4. With carbonates and hydrogencarbonates (Activity 4.9)
Telling ethanol and ethanoic acid apart
| Test | Ethanol | Ethanoic acid |
|---|---|---|
| Smell | Pleasant, spirit-like | Sharp smell of vinegar |
| Melting point | 156 K | 290 K (freezes in cold weather) |
| Blue litmus | No change | Turns red |
| Sodium hydrogencarbonate | No reaction | Brisk effervescence of CO2 |
| Sodium metal | Hydrogen given off | Hydrogen given off (both react) |
Remember
- Vinegar: 5–8% acetic acid. Glacial acetic acid: pure, melts at 290 K. A weak acid.
- Acid + alcohol → ester + water (conc. H₂SO₄). Ester + NaOH → alcohol + sodium salt (saponification).
- With carbonates and hydrogencarbonates: salt + water + CO₂ (lime water turns milky).
Quick checkHow would you distinguish experimentally between an alcohol and a carboxylic acid?Show answer
Add sodium hydrogencarbonate to each. The carboxylic acid gives brisk effervescence of carbon dioxide (it turns lime water milky); the alcohol gives no reaction. (Blue litmus also turns red only with the acid.)
13Soaps and detergents
Soap
The sodium or potassium salt of a long-chain carboxylic acid, such as sodium stearate, C17H35COONa.
Soap with oil and water (Activity 4.10)
Shake a drop of oil with water in two test tubes, A and B; add soap only to B. In A, the oil and water separate quickly. In B, the oil stays mixed with the water for longer: the soap forms an emulsion.
The soap molecule
| Part | Nature | Interacts with |
|---|---|---|
| Long hydrocarbon chain (tail) | Hydrophobic (water-hating) | Oil and grease |
| Ionic end, –COO−Na+ (head) | Hydrophilic (water-loving) | Water |
Micelles
Micelle
A cluster of soap molecules in water, with the hydrocarbon tails inside (away from the water) and the ionic heads on the surface, facing the water. Oily dirt collects in its centre.
- At the surface of water, soap molecules line up with the ionic end in the water and the tail sticking out.
- Inside the water, they form micelles, so that the tails stay out of the water.
- Micelles stay in the solution as a colloid. They do not come together and settle, because their charged surfaces repel each other (ion–ion repulsion).
- Micelles are large enough to scatter light, so soap solution looks cloudy.
- In a hydrocarbon solvent the arrangement is reversed: the ionic heads point inwards and the tails outwards. In ethanol, micelles do not form, because soap dissolves in it fully.
How soap cleans
- Most dirt is oily, and oil does not dissolve in water.
- The tails of soap molecules dissolve in the oily dirt; the ionic heads stay in the water.
- The molecules surround the dirt and form a micelle, which pulls the dirt off the cloth into the water (an emulsion).
- Rinsing with water carries the micelles, and the dirt, away. Agitation (beating, scrubbing, a washing machine) helps lift the dirt and form micelles faster.
Hard water and scum (Activities 4.11 and 4.12)
Hard water
Water containing salts of calcium and magnesium (their hydrogencarbonates, chlorides or sulphates). With soap it gives little foam and forms scum.
- Scum is the insoluble, white curdy solid formed when soap reacts with calcium and magnesium ions. Much soap is wasted, so more soap is needed.
- Distilled water or rain water is soft: soap gives plenty of foam.
Detergents
Cleansing agents that are generally sodium salts of sulphonic acids or ammonium salts with chloride or bromide ions. Like soaps, they have a long hydrocarbon chain and a charged end.
| Soaps | Detergents | |
|---|---|---|
| Made of | Sodium or potassium salts of long-chain carboxylic acids | Sodium salts of sulphonic acids, or ammonium salts with chloride or bromide ions |
| In hard water | Form scum; little foam | No scum: their charged ends do not form insoluble solids with Ca2+ and Mg2+ |
| Works in hard water? | Poorly | Yes |
| Uses | Bathing, washing | Shampoos, products for cleaning clothes |
Note: a detergent cannot be used to check whether water is hard, because it foams well in both hard and soft water. Use soap instead.
Remember
- Soap: Na or K salt of a long-chain carboxylic acid. Tail hydrophobic, head hydrophilic.
- Micelle: tails in, heads out; dirt trapped in the centre and rinsed away.
- Hard water (Ca²⁺, Mg²⁺) + soap → scum. Detergents work in hard water.
Quick checkWhy does soap not work well in hard water?Show answer
Calcium and magnesium ions in hard water react with soap to form an insoluble scum. The soap is used up, so little foam forms and more soap is needed.