In this chapter 12 topics
- 1Physical properties of metals
- 2Non-metals, exceptions and chemical differences
- 3Metals with oxygen: basic and amphoteric oxides
- 4Metals with water
- 5Metals with dilute acids, and aqua regia
- 6Displacement and the reactivity series
- 7How metals and non-metals react: ionic compounds
- 8Properties of ionic compounds
- 9Occurrence of metals and the steps of extraction
- 10Extracting and refining metals
- 11Corrosion and its prevention
- 12Alloys
1Physical properties of metals
Metals
Elements that are usually hard, shiny solids, can be hammered into sheets and drawn into wires, and conduct heat and electricity well. Examples: iron, copper, aluminium, magnesium, sodium, zinc, lead, gold, silver.
| Property | What it means | Examples and notes |
|---|---|---|
| Metallic lustre | A shining surface when pure and freshly cleaned | Rub iron, copper or magnesium with sandpaper: the dull layer goes and the shine shows (Activity 3.1) |
| Hardness | Hard to cut or scratch | Most metals are hard; hardness varies from metal to metal. Sodium is soft enough to cut with a knife (Activity 3.2) |
| Malleability | Can be beaten into thin sheets | Gold and silver are the most malleable. Aluminium foil wraps food (Activity 3.3) |
| Ductility | Can be drawn into thin wires | Gold is the most ductile: about 2 km of wire from 1 g of gold. Copper and aluminium wires (Activity 3.4) |
| Conduction of heat | Lets heat pass through easily | Silver and copper are the best conductors. Lead and mercury are comparatively poor (Activity 3.5) |
| Conduction of electricity | Lets an electric current pass | Copper and aluminium are used for electric wires (Activity 3.6) |
| High melting point | Stays solid when strongly heated | The wire in Activity 3.5 does not melt in the flame |
| Sonority | Gives a ringing sound when struck | School bells and temple bells are made of metal |
| Physical state | Solid at room temperature | Except mercury, a liquid |
Metals conduct heat (Activity 3.5)
- Heat travels along the wire from the hot end: metals are good conductors of heat.
- The wire does not melt: metals have high melting points.
- This is why cooking vessels are made of aluminium, copper or steel: heat reaches the food quickly, and the pan does not melt on the stove.
Metals conduct electricity (Activity 3.6)
- Put the sample between clips A and B and close the switch. The bulb glows for every metal: metals are good conductors of electricity.
- Electric wires are coated with PVC (polyvinylchloride) or a rubber-like material. These are insulators: they do not conduct, so the coating stops electric shocks and short circuits.
Properties and uses
| Use | Metal | Property used |
|---|---|---|
| Electric wires | Copper, aluminium | Ductile; good conductors of electricity |
| Cooking vessels | Aluminium, copper, iron (steel) | Good conductors of heat; high melting points |
| Jewellery | Gold, silver, platinum | Lustrous; malleable and ductile; do not corrode |
| Foil for wrapping food | Aluminium | Malleable |
| Bells | Bronze and other metals | Sonorous |
Remember
- Metals: lustrous, hard, malleable, ductile, sonorous, good conductors of heat and electricity, high melting points.
- Best conductors of heat: silver and copper. Poor: lead and mercury.
- Most malleable: gold and silver. Most ductile: gold.
Quick checkWhy are school bells made of metal, and why are electric wires coated with PVC?Show answer
Metals are sonorous: they ring when struck. PVC is an insulator, so the coating prevents shocks and short circuits.
2Non-metals, exceptions and chemical differences
Non-metals
Elements that are usually dull, brittle (if solid) and poor conductors of heat and electricity. There are far fewer non-metals than metals. Examples: carbon, sulphur, iodine, oxygen, hydrogen, nitrogen, chlorine. They are solids or gases, except bromine, which is a liquid.
| Property | Metals | Non-metals |
|---|---|---|
| State at room temperature | Solids (mercury is a liquid) | Solids or gases (bromine is a liquid) |
| Lustre | Lustrous | Dull (iodine is lustrous) |
| Hardness | Generally hard | Solids are generally soft (diamond is very hard) |
| Malleable and ductile? | Yes | No: solids are brittle and break into pieces |
| Heat and electricity | Good conductors | Poor conductors (graphite conducts electricity) |
| Sonorous? | Yes | No |
| Melting and boiling points | Generally high | Generally low (diamond is very high) |
Exceptions: why physical properties are not enough
| Element | Type | Unusual property |
|---|---|---|
| Mercury | Metal | Liquid at room temperature |
| Gallium, caesium | Metals | Melting points so low that they melt on your palm |
| Lithium, sodium, potassium | Metals (alkali metals) | So soft they can be cut with a knife; low densities and low melting points |
| Lead, mercury | Metals | Comparatively poor conductors of heat |
| Iodine | Non-metal | Lustrous (shiny) |
| Diamond (a form of carbon) | Non-metal | Hardest natural substance; very high melting and boiling points |
| Graphite (a form of carbon) | Non-metal | Conducts electricity |
| Bromine | Non-metal | Liquid at room temperature |
Allotropes
Different forms of the same element, with different physical properties. Diamond and graphite are allotropes of carbon.
Because of these exceptions, elements are classified more clearly by their chemical properties, especially the nature of their oxides.
Oxides of a metal and a non-metal (Activity 3.8)
- Magnesium burns with a dazzling white flame and leaves a white ash, magnesium oxide.
- Most metals form basic oxides. Most non-metals form acidic oxides, which dissolve in water to give acids.
Chemical properties: metals and non-metals compared
| Chemical property | Metals | Non-metals |
|---|---|---|
| Oxides | Basic (a few, such as Al2O3 and ZnO, are amphoteric) | Acidic (SO2, CO2) or neutral (CO, H2O) |
| Electrons | Lose electrons: form positive ions, Na+, Mg2+ | Gain electrons: form negative ions, Cl−, O2− |
| Dilute acids | Metals above hydrogen give hydrogen gas | Do not give hydrogen |
| Hydrogen | Most do not react | Form hydrides: HCl, H2S, NH3, H2O |
| Compounds with each other | Form ionic compounds with non-metals | Form ionic compounds with metals |
Why non-metals do not give hydrogen with dilute acids: to give hydrogen gas, an element must give electrons to the H+ ions of the acid. Non-metals take electrons; they do not give them.
Remember
- Non-metals: dull, brittle, poor conductors; mostly solids or gases (bromine is a liquid).
- Exceptions: mercury (liquid metal), gallium and caesium (melt on the palm), iodine (lustrous), diamond (hardest), graphite (conducts).
- Metal oxides are basic; non-metal oxides are acidic or neutral.
Quick checkAn element is a dull solid, breaks when hammered, and its oxide turns moist blue litmus red. Is it a metal or a non-metal?Show answer
A non-metal. It is brittle and dull, and its oxide is acidic.
3Metals with oxygen: basic and amphoteric oxides
Metal + oxygen
Metal + Oxygen → Metal oxide
Almost all metals combine with oxygen. Metal oxides are basic.
Different metals, different reactivity (Activity 3.9)
| Metal | With oxygen (air) |
|---|---|
| Potassium, sodium | React so vigorously that they catch fire in air. Kept under kerosene oil |
| Magnesium | Burns with a dazzling white flame |
| Aluminium, zinc, lead | At ordinary temperature, covered by a thin protective oxide layer that stops further oxidation |
| Iron | A lump does not burn; iron filings burn vigorously (sparkle) when sprinkled in a flame |
| Copper | Does not burn; the hot metal gets a black coat of copper(II) oxide |
| Silver, gold | Do not react with oxygen, even at high temperatures |
Of these samples, sodium is the most reactive, then magnesium. Burning alone cannot decide the order of zinc, iron, copper and lead: their reactions with water and acids help (topics 4 to 6).
Why sodium and potassium are kept under kerosene: they react vigorously with oxygen (and water) in the air and can catch fire. Kerosene keeps air and moisture away.
Amphoteric oxides
Amphoteric oxide
A metal oxide that reacts with both acids and bases to give a salt and water. Examples: aluminium oxide, Al2O3, and zinc oxide, ZnO.
Oxides that dissolve in water
Most metal oxides are insoluble in water. A few dissolve to form alkalis:
Anodising
Anodising
Making the natural oxide layer on aluminium thicker, to protect it from corrosion. The clean aluminium article is made the anode and electrolysed with dilute sulphuric acid. Oxygen formed at the anode reacts with the aluminium to give a thicker oxide layer.
- The thicker layer resists corrosion better.
- It can be dyed easily, giving aluminium articles an attractive finish.
Remember
- Metal + oxygen → metal oxide (basic). Al2O3 and ZnO are amphoteric.
- Sodium and potassium catch fire in air: stored under kerosene.
- Aluminium, zinc and lead are protected by a thin oxide layer; anodising makes it thicker.
Quick checkZinc oxide dissolves both in dilute hydrochloric acid and in sodium hydroxide solution. What kind of oxide is it? Write both equations.Show answer
An amphoteric oxide.
ZnO + 2HCl → ZnCl2 + H2O
ZnO + 2NaOH → Na2ZnO2 + H2O
4Metals with water
Metal + water
Metal + Water → Metal oxide + Hydrogen
Metal oxide + Water → Metal hydroxide (if the oxide is soluble)
Not all metals react with water.
| Metal | Reacts with | What happens |
|---|---|---|
| Potassium, sodium | Cold water | Violent and very exothermic: the hydrogen catches fire |
| Calcium | Cold water | Less violent: the hydrogen does not catch fire. Calcium floats |
| Magnesium | Hot water (not cold) | Forms magnesium hydroxide and hydrogen. Magnesium floats |
| Aluminium, zinc, iron | Steam only | Form the metal oxide and hydrogen |
| Lead, copper, silver, gold | Nothing | No reaction with water at all |
With cold and hot water
Why calcium and magnesium float: bubbles of hydrogen stick to the surface of the metal and lift it up.
With steam (Activity 3.10)
- Put the metal sample in a boiling tube, with glass wool soaked in water at the closed end.
- Heat the tube. The water in the glass wool turns to steam, which passes over the hot metal.
- Collect the gas over water in an upside-down test tube. It burns with a pop: it is hydrogen.
With water, the order of reactivity is: K > Na > Ca > Mg > Al > Zn > Fe. Lead, copper, silver and gold do not react.
Remember
- Cold water: K, Na (violent, hydrogen catches fire), Ca (gentle, floats).
- Hot water: Mg (floats). Steam: Al, Zn, Fe (oxide + hydrogen).
- No reaction: Pb, Cu, Ag, Au.
Quick checkWrite the equation for the reaction of iron with steam. Why is steam needed?Show answer
3Fe(s) + 4H2O(g) → Fe3O4(s) + 4H2(g)
Iron is not reactive enough to react with cold or hot water; it reacts only with steam.
5Metals with dilute acids, and aqua regia
Metal + dilute acid
Metal + Dilute acid → Salt + Hydrogen
Only metals above hydrogen in the reactivity series do this.
How fast? (Activity 3.11)
- Clean the metals with sandpaper first; never use sodium or potassium (they react violently even with cold water).
- Magnesium bubbles fastest and gives the highest temperature: the most exothermic reaction.
- Order of reactivity: Mg > Al > Zn > Fe.
- Copper: no bubbles and no change in temperature. Copper does not react with dilute hydrochloric acid, because it is below hydrogen in the reactivity series.
| Metal | With dilute hydrochloric acid |
|---|---|
| Magnesium | Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g) |
| Aluminium | 2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g) |
| Zinc | Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g) |
| Iron | Fe(s) + 2HCl(aq) → FeCl2(aq) + H2(g) |
With dilute sulphuric acid the salt is a sulphate, for example Fe(s) + H2SO4(aq) → FeSO4(aq) + H2(g).
Nitric acid is different
- Metals usually give no hydrogen with nitric acid. Nitric acid is a strong oxidising agent: it oxidises the hydrogen to water and is itself reduced to an oxide of nitrogen (N2O, NO or NO2).
- Exceptions: magnesium and manganese give hydrogen with very dilute nitric acid:
Aqua regia
Aqua regia
Latin for “royal water”. A freshly prepared mixture of concentrated hydrochloric acid and concentrated nitric acid in the ratio 3 : 1. It is a highly corrosive, fuming liquid.
- It dissolves gold and platinum, which neither acid can dissolve alone.
- It is one of the very few reagents that can dissolve gold.
Remember
- Metal + dilute acid → salt + hydrogen, for metals above hydrogen.
- Mg > Al > Zn > Fe with dilute HCl; copper does not react.
- Nitric acid oxidises the hydrogen to water (except Mg and Mn with very dilute acid). Aqua regia: 3 parts conc. HCl, 1 part conc. HNO3.
Quick checkName a metal that gives no hydrogen with dilute hydrochloric acid, and say why.Show answer
Copper (or silver, gold). It is below hydrogen in the reactivity series, so it cannot displace hydrogen from the acid.
6Displacement and the reactivity series
Displacement
A more reactive metal pushes out (displaces) a less reactive metal from its compound, in solution or molten form.
Metal A + Salt solution of B → Salt solution of A + Metal B (if A is more reactive than B)
Iron and copper (Activity 3.12)
- Tube A: the iron nail gets a reddish-brown coat of copper, and the blue solution fades to pale green. A reaction has taken place.
- Tube B: the copper wire in iron sulphate solution shows no change.
- So iron is more reactive than copper. The reaction is a displacement reaction.
The reactivity series
Reactivity series (activity series)
A list of metals arranged in order of decreasing reactivity, worked out from displacement reactions. Hydrogen is included for comparison.
Memory aid: K Na Ca Mg Al Zn Fe Pb [H] Cu Hg Ag Au: “Please Stop Calling Me A Zebra In London; He Can Make Silly Guesses.”
Using the series
| Displacement | Equation | Seen |
|---|---|---|
| Zinc + copper sulphate | Zn(s) + CuSO4(aq) → ZnSO4(aq) + Cu(s) | Blue colour fades; red-brown copper forms |
| Zinc + iron(II) sulphate | Zn(s) + FeSO4(aq) → ZnSO4(aq) + Fe(s) | Pale green colour fades; grey iron forms |
| Copper + silver nitrate | Cu(s) + 2AgNO3(aq) → Cu(NO3)2(aq) + 2Ag(s) | Solution turns blue; shiny silver forms |
| Magnesium + zinc sulphate | Mg(s) + ZnSO4(aq) → MgSO4(aq) + Zn(s) | Grey zinc forms on the magnesium |
- No reaction when the metal is less reactive: copper + iron(II) sulphate, silver + copper sulphate, copper + sodium chloride.
- Metals above hydrogen displace hydrogen from dilute acids; metals below it do not.
- The series also tells how metals are found in nature and how they are extracted (topic 9).
Worked example 1
Metals P, Q and R are put into solutions of each other’s salts. P displaces Q and R; Q displaces R; R displaces neither. Arrange them in order of decreasing reactivity.
Solution
- P displaces both others, so P is the most reactive.
- Q displaces R, so Q is more reactive than R.
- R displaces nothing, so it is the least reactive.
P > Q > R
Remember
- A more reactive metal displaces a less reactive one from its salt solution.
- Series: K, Na, Ca, Mg, Al, Zn, Fe, Pb, [H], Cu, Hg, Ag, Au.
- Iron in copper sulphate: blue fades to green, copper forms. Copper in iron sulphate: no change.
Quick checkWhat happens when zinc is added to iron(II) sulphate solution? Write the equation.Show answer
Zinc is more reactive than iron, so it displaces iron. The pale green colour fades and grey iron is deposited.
Zn(s) + FeSO4(aq) → ZnSO4(aq) + Fe(s)
7How metals and non-metals react: ionic compounds
Noble gases have a completely filled outer (valence) shell and hardly react. Other atoms react to reach the same stable arrangement: 8 electrons in the outer shell (an octet), or 2 if the only shell is the K shell.
Electron arrangements (Table 3.3)
| Element | Atomic number | Electrons in shells K, L, M, N | Type |
|---|---|---|---|
| Helium (He) | 2 | 2 | Noble gas |
| Neon (Ne) | 10 | 2, 8 | Noble gas |
| Argon (Ar) | 18 | 2, 8, 8 | Noble gas |
| Sodium (Na) | 11 | 2, 8, 1 | Metal |
| Magnesium (Mg) | 12 | 2, 8, 2 | Metal |
| Aluminium (Al) | 13 | 2, 8, 3 | Metal |
| Potassium (K) | 19 | 2, 8, 8, 1 | Metal |
| Calcium (Ca) | 20 | 2, 8, 8, 2 | Metal |
| Nitrogen (N) | 7 | 2, 5 | Non-metal |
| Oxygen (O) | 8 | 2, 6 | Non-metal |
| Fluorine (F) | 9 | 2, 7 | Non-metal |
| Phosphorus (P) | 15 | 2, 8, 5 | Non-metal |
| Sulphur (S) | 16 | 2, 8, 6 | Non-metal |
| Chlorine (Cl) | 17 | 2, 8, 7 | Non-metal |
- Metals have 1 to 3 outer electrons. They lose them and become positive ions.
- Non-metals have 5 to 7 outer electrons. They gain electrons and become negative ions.
Cation and anion
A cation is a positive ion, formed when an atom loses electrons (Na+, Mg2+). An anion is a negative ion, formed when an atom gains electrons (Cl−, O2−).
Sodium chloride
- The sodium ion still has 11 protons but only 10 electrons: a charge of +1.
- The chloride ion has 17 protons and 18 electrons: a charge of −1.
The oppositely charged ions attract each other by strong electrostatic forces. Sodium chloride does not exist as molecules: it is a large group (aggregate) of Na+ and Cl− ions.
Ionic (electrovalent) compound
A compound formed by the transfer of electrons from a metal to a non-metal. The force holding the ions together is an ionic bond. Examples: NaCl, MgCl2, MgO, Na2O, CaO.
Magnesium chloride
The cation is Mg2+ and the anions are two Cl− ions. Total charge: +2 − 2 = 0.
Magnesium oxide
Formulae from the charges
The charges must add up to zero.
| Cation | Anion | Formula |
|---|---|---|
| Na+ | Cl− | NaCl |
| Mg2+ | Cl− | MgCl2 |
| Mg2+ | O2− | MgO |
| Na+ | O2− | Na2O |
| Ca2+ | Cl− | CaCl2 |
| Al3+ | O2− | Al2O3 |
Remember
- Atoms react to get a full outer shell (octet).
- Metals lose electrons: cations. Non-metals gain electrons: anions.
- Ionic compound: electrons transferred from a metal to a non-metal; ions held by electrostatic attraction.
Quick checkName the cation and the anion in magnesium chloride, and give their electron arrangements.Show answer
Cation: Mg2+ (2, 8). Anion: Cl− (2, 8, 8); there are two of them for each magnesium ion.
8Properties of ionic compounds
Testing some salts (Activity 3.13)
- Look at samples of sodium chloride, potassium iodide and barium chloride: all are solids.
- Heat a little of each on a metal spatula in a flame. They are hard to melt; some give the flame a colour.
- Try to dissolve each in water, petrol and kerosene.
- Test a solution of each with a circuit of a battery, bulb and two electrodes (Figure 14).
| Ionic compound | Melting point (K) | Boiling point (K) |
|---|---|---|
| NaCl | 1074 | 1686 |
| LiCl | 887 | 1600 |
| CaCl2 | 1045 | 1900 |
| CaO | 2850 | 3120 |
| MgCl2 | 981 | 1685 |
General properties
| Property | Ionic compounds | Reason |
|---|---|---|
| Physical nature | Solids; somewhat hard; brittle (break into pieces under pressure) | Strong attraction between positive and negative ions |
| Melting and boiling points | High | A lot of energy is needed to break the strong attraction between the ions |
| Solubility | Generally soluble in water; insoluble in kerosene, petrol and similar solvents | Water separates the ions; kerosene and petrol do not |
| Conduction of electricity | Conduct when molten or dissolved in water; not as solids | Current is carried by moving ions; in a solid the ions are held in fixed places |
- In a solution, the ions move to the oppositely charged electrodes and carry the current.
- In the molten state, the heat overcomes the electrostatic forces between the ions, so they move freely and conduct.
- Solid ionic compounds have a rigid structure: the ions cannot move, so the solid does not conduct.
Remember
- Ionic compounds: hard, brittle solids with high melting and boiling points.
- Soluble in water; insoluble in kerosene and petrol.
- Conduct only when molten or dissolved: the ions must be free to move.
Quick checkSolid sodium chloride does not conduct electricity, but its solution in water does. Why?Show answer
In the solid, the ions are held in fixed places and cannot move. In solution the ions are free to move to the electrodes, so they carry the current.
9Occurrence of metals and the steps of extraction
The earth’s crust is the main source of metals. Seawater also contains soluble salts such as sodium chloride and magnesium chloride.
Key terms
- Mineral: an element or compound that occurs naturally in the earth’s crust.
- Ore: a mineral with a high percentage of a metal, from which the metal can be extracted profitably.
- Gangue: the unwanted impurities, such as soil and sand, in an ore as it is mined.
- Metallurgy: extracting metals from their ores and refining them for use.
All ores are minerals, but not all minerals are ores.
How metals are found
| Metals | Reactivity | Found in nature as | Extracted by |
|---|---|---|---|
| K, Na, Ca, Mg, Al | High | Compounds only: never free | Electrolysis of the molten compound |
| Zn, Fe, Pb, (Cu) | Medium | Oxides, sulphides or carbonates | Roasting or calcination, then reduction with carbon |
| Cu, Ag | Low | Free, and as sulphide or oxide ores | Heating the ore alone (copper); refining |
| Au, Pt (and Ag) | Very low | Free (native state) | Separation and refining |
Many ores are oxides, because oxygen is very reactive and very abundant on the earth.
Steps of extraction
1. Enrichment (concentration) of the ore
- The gangue is removed before the metal is extracted.
- The method uses a difference in physical or chemical properties between the gangue and the ore. For example, heavy ore particles settle in running water while light sand is washed away, and a magnetic ore can be picked out with a magnet.
2. Metals low in the series: heating alone
Their oxides can be reduced to the metal by heating alone.
Copper, found as Cu2S, is obtained by just heating the ore in air:
Remember
- Ore = mineral from which the metal can be extracted profitably. Gangue = impurities.
- Top of series (K to Al): electrolysis. Middle (Zn, Fe, Pb, Cu): reduction. Bottom (Ag, Au): found free.
- Mercury and copper: heating the sulphide ore alone gives the metal.
Quick checkName two metals found free in nature, and say why they are found free.Show answer
Gold and silver (also platinum, copper). They are at the bottom of the reactivity series, so they hardly react with oxygen, water or other substances around them.
10Extracting and refining metals
Metals in the middle of the series
Iron, zinc, lead and copper are usually found as sulphides or carbonates. It is easier to get a metal from its oxide, so the ore is first changed into the oxide.
| Roasting | Calcination | |
|---|---|---|
| Used for | Sulphide ores | Carbonate ores |
| How | Heated strongly in excess air | Heated strongly in limited air |
| Gas given off | Sulphur dioxide | Carbon dioxide |
| Example (zinc) | 2ZnS(s) + 3O2(g) Heat gives 2ZnO(s) + 2SO2(g) | ZnCO3(s) Heat gives ZnO(s) + CO2(g) |
Reduction with carbon
The oxide is heated with a reducing agent such as carbon (coke):
Zinc oxide loses oxygen (it is reduced); carbon gains oxygen (it is oxidised). Getting a metal from its compound is always a reduction.
Reduction by a more reactive metal
Highly reactive metals such as sodium, calcium and aluminium can displace less reactive metals from their oxides:
Manganese dioxide is reduced; aluminium is oxidised. These reactions are highly exothermic: the metal forms in the molten state.
Thermit reaction
The reaction of iron(III) oxide with aluminium. It gives out so much heat that the iron formed is molten. It is used to join railway tracks and to repair cracked machine parts.
Metals at the top of the series: electrolytic reduction
- Carbon cannot reduce the oxides of sodium, magnesium, calcium and aluminium: these metals hold oxygen more strongly than carbon does (they have a greater affinity for oxygen).
- They are obtained by electrolysis of their molten compounds. Sodium, magnesium and calcium come from their molten chlorides; aluminium from molten aluminium oxide.
- The metal forms at the cathode (negative electrode); chlorine is given off at the anode (positive electrode).
The compound must be molten, not dissolved in water: in water, hydrogen would form at the cathode instead of sodium.
Refining: electrolytic refining
Metals from reduction are not very pure. The most widely used method of purifying them is electrolytic refining. Copper, zinc, tin, nickel, silver and gold are refined this way.
Electrolytic refining of copper
- Anode (+): a block of impure copper.
- Cathode (−): a thin strip of pure copper.
- Electrolyte: a solution of the metal salt: acidified copper sulphate.
- Pure copper from the anode dissolves into the solution; an equal amount of pure copper from the solution is deposited on the cathode.
- Soluble impurities go into the solution. Insoluble impurities settle below the anode as anode mud.
Remember
- Roasting: sulphide ore in excess air. Calcination: carbonate ore in limited air. Both give the oxide.
- Oxide + carbon → metal (reduction). Thermit: Fe2O3 + Al → molten Fe; joins rails.
- K to Al: electrolysis of molten compounds. Refining: impure anode, pure cathode, salt solution; anode mud below the anode.
Quick checkIn the electrolytic refining of a metal, what is taken as the anode, the cathode and the electrolyte?Show answer
Anode: the impure metal. Cathode: a thin strip of the pure metal. Electrolyte: a solution of a salt of the metal (for copper, acidified copper sulphate).
11Corrosion and its prevention
Corrosion
The slow eating away of a metal’s surface when it is exposed to moist air (and other substances in the air) for a long time. The rusting of iron is the best-known example.
| Metal | What you see | Substance formed |
|---|---|---|
| Silver | Turns black | Silver sulphide, Ag2S: silver reacts with sulphur compounds in the air |
| Copper | Loses its shiny brown surface; gains a green coat | Basic copper carbonate, CuCO3·Cu(OH)2: copper reacts with moist carbon dioxide in the air |
| Iron | A brown, flaky coat | Rust: hydrated iron(III) oxide, Fe2O3·xH2O |
What does iron need to rust? (Activity 3.14)
| Tube | Set-up | Nails exposed to | Result |
|---|---|---|---|
| A | Ordinary water, corked | Air and water | Rust |
| B | Boiled distilled water (no dissolved air) with a layer of oil on top, corked | Water only | No rust |
| C | Anhydrous calcium chloride (takes up moisture), corked | Dry air only | No rust |
Conclusion: iron rusts only when both air (oxygen) and water (moisture) are present.
Preventing corrosion
| Method | How it works |
|---|---|
| Painting, oiling, greasing | A coat keeps air and moisture away from the iron |
| Galvanising | Coating iron or steel with a thin layer of zinc |
| Chrome plating | A thin coat of chromium, which does not corrode and is shiny |
| Anodising | Thickening the protective oxide layer on aluminium |
| Making alloys | For example stainless steel (iron with nickel and chromium) does not rust |
Galvanised iron stays protected even if the zinc coat is broken. Zinc is more reactive than iron, so the zinc reacts with air and water first. The iron is not attacked while zinc remains.
The iron pillar near the Qutub Minar, Delhi: made by Indian iron-workers more than 1600 years ago, it is 8 m high and weighs 6 tonnes (6000 kg). Their process made it resist rusting, and scientists from all over the world have studied it.
Remember
- Silver: black Ag2S. Copper: green basic copper carbonate. Iron: brown rust, Fe2O3·xH2O.
- Rusting needs both air and water.
- Prevention: paint, oil, grease, galvanise (zinc), chrome plate, anodise, alloy.
Quick checkWhy does a galvanised iron bucket not rust even after the zinc coating gets a scratch?Show answer
Zinc is more reactive than iron. Around the scratch the zinc reacts with air and moisture instead of the iron, so the iron stays protected.
12Alloys
Alloy
A homogeneous mixture of two or more metals, or of a metal and a non-metal. It is made by melting the main metal and dissolving the other elements in it in definite proportions, then cooling to room temperature.
- Alloying is a very good way to improve the properties of a metal.
- Iron is the most widely used metal, but never in its pure state: pure iron is very soft and stretches easily when hot.
- Iron with a small amount of carbon (about 0.05%) becomes hard and strong: steel.
- Iron with nickel and chromium gives stainless steel, which is hard and does not rust.
Amalgam
An alloy in which one of the metals is mercury.
Common alloys
| Alloy | Made of | Special property | Use |
|---|---|---|---|
| Steel | Iron + about 0.05% carbon | Hard and strong | Buildings, bridges, machines |
| Stainless steel | Iron + nickel + chromium | Hard; does not rust | Utensils, surgical tools |
| Brass | Copper + zinc | Harder than copper; poorer conductor | Taps, fittings, musical instruments |
| Bronze | Copper + tin | Hard; resists corrosion; poorer conductor | Statues, medals, bells |
| Solder | Lead + tin | Low melting point | Joining (welding) electrical wires |
| Amalgam | Mercury + another metal | Soft at first, then hardens | Tooth fillings (dental amalgam) |
| 22-carat gold | Gold + copper or silver | Harder than pure gold | Jewellery |
- The electrical conductivity and the melting point of an alloy are lower than those of the pure metals.
- So brass and bronze are not good conductors, and pure copper is used for electric circuits.
- Solder melts easily, so it is used to join electric wires.
Gold for jewellery
Pure gold, 24-carat gold, is very soft, so it is not suitable for jewellery. It is alloyed with silver or copper to make it hard. 22-carat gold means 22 parts of pure gold alloyed with 2 parts of copper or silver.
Worked example 2
What fraction, and what percentage, of 22-carat gold is pure gold?
Solution
22-carat gold is 1112 pure gold, about 91.7%.
Remember
- Alloy: homogeneous mixture of metals, or of a metal and a non-metal. Amalgam: an alloy with mercury.
- Brass = Cu + Zn; bronze = Cu + Sn; solder = Pb + Sn; stainless steel = Fe + Ni + Cr.
- Alloys have lower electrical conductivity and lower melting points than the pure metals.
Quick checkWhy is solder used to join electric wires, and why are brass and bronze not used for electric circuits?Show answer
Solder (lead and tin) has a low melting point, so it melts easily to make a joint. Brass and bronze are alloys and are poorer conductors of electricity than pure copper.