Chapter 2 · Chemistry

Acids, Bases and Salts

How to test for acids and bases with indicators, how they react, what the pH scale tells you, and how common salts such as baking soda, washing soda, bleaching powder and plaster of Paris are made and used.

Done reading? Try the pH lab activity on this chapter.
In this chapter 10 topics
  1. 1Acids, bases and indicators
  2. 2Reactions of acids and bases with metals
  3. 3Acids with metal carbonates and hydrogencarbonates
  4. 4Neutralisation, and metal and non-metal oxides
  5. 5Acids and bases in water: ions and dilution
  6. 6The pH scale, and strong and weak acids
  7. 7pH in everyday life
  8. 8Salts: families and pH
  9. 9Chemicals from common salt
  10. 10Water of crystallisation and plaster of Paris

1Acids, bases and indicators

Acids and bases

Acids taste sour and turn blue litmus red. Bases taste bitter, feel soapy and turn red litmus blue. Never taste or touch laboratory chemicals: test them with indicators instead.

AcidsBases
TasteSourBitter
LitmusBlue litmus turns redRed litmus turns blue
FeelStrong acids burn the skinSoapy; strong bases burn the skin
Ion formed in waterH+(aq), hydrogen ionOH−(aq), hydroxide ion
In the laboratoryHCl, H2SO4, HNO3, CH3COOHNaOH, KOH, Ca(OH)2, Mg(OH)2, NH4OH
At homeLemon juice, vinegar, curd, tomatoSoap, baking soda solution, milk of magnesia

Indicator

An acid–base indicator is a dye, or a mixture of dyes, that shows whether a substance is acidic or basic by a change in colour (or, for some, a change in smell).

TypeExamples
NaturalLitmus, turmeric, red cabbage leaves, coloured petals of Hydrangea, Petunia and Geranium
Synthetic (made in factories)Phenolphthalein, methyl orange
Olfactory (smell changes)Onion, vanilla essence, clove oil
Universal indicatorA mixture of several indicators; shows a different colour at each pH (topic 6)
  • Litmus is a purple dye taken from lichen (a plant of the division Thallophyta). Litmus solution is purple when it is neither acidic nor basic.
  • Turmeric is yellow. A base turns it reddish brown. A curry stain on a white cloth turns reddish brown when soap (a base) is rubbed on it. It turns yellow again when the soap is rinsed away with plenty of water.

Colours of indicators

Colours of five indicators. Blue litmus turns red in acid and stays blue in base. Red litmus stays red in acid and turns blue in base. Phenolphthalein is colourless in acid and pink in base. Methyl orange is red in acid and yellow in base. Turmeric stays yellow in acid and turns reddish brown in base.In acidIn baseBlue litmusRedStays blueRed litmusStays redBluePhenolphthaleinColourlessPinkMethyl orangeRedYellowTurmericStays yellowReddish brown
Figure 1. What five common indicators show in an acid and in a base.
IndicatorIts own colourIn acidIn base
Blue litmusBlueRedNo change
Red litmusRedNo changeBlue
Litmus solutionPurpleRedBlue
PhenolphthaleinColourlessColourlessPink
Methyl orangeOrangeRedYellow
TurmericYellowNo changeReddish brown
Red cabbage extractPurpleRedGreen (yellow in a strong base)

Testing laboratory acids and bases (Activity 2.1)

Put a drop of each solution on a watch-glass and add a drop of each indicator. What you should find:

SolutionsRed litmusBlue litmusPhenolphthaleinMethyl orange
Acids: HCl, H2SO4, HNO3, CH3COOHNo changeRedColourlessRed
Bases: NaOH, KOH, Ca(OH)2, Mg(OH)2, NH4OHBlueNo changePinkYellow

Olfactory indicators (Activity 2.2)

Olfactory indicator

A substance whose smell changes in an acidic or a basic medium. It can be used by someone who cannot see colours.

SubstanceWith dilute HCl (acid)With dilute NaOH (base)
Onion (cloth strips kept with chopped onion)Smell staysSmell goes
Vanilla essenceSmell staysSmell goes
Clove oilSmell staysSmell goes

All three, onion, vanilla and clove, can be used as olfactory indicators: a base removes their smell; an acid does not.

Worked example 1

Three test tubes hold distilled water, an acid and a base. You have only red litmus paper. How will you find which is which?

Solution

  1. Dip red litmus paper in each tube. The one that turns it blue is the base.
  2. Dip this blue paper in the other two tubes. The tube that turns it back to red has the acid.
  3. The tube that changes neither paper has the distilled water (neutral).

The base turns red litmus blue; the acid turns that blue litmus red; water changes neither.

Remember

  • Acid: blue litmus to red, methyl orange red, phenolphthalein stays colourless.
  • Base: red litmus to blue, methyl orange yellow, phenolphthalein pink, turmeric reddish brown.
  • Onion, vanilla and clove oil lose their smell in a base: olfactory indicators.
Quick checkA solution turns turmeric paper reddish brown. Is it acidic or basic? What colour will it give with phenolphthalein?Show answer

It is basic. With phenolphthalein it turns pink.

2Reactions of acids and bases with metals

Acid + metal (Activity 2.3)

Zinc granules in dilute sulphuric acid in a test tube held on a stand. Hydrogen gas bubbles off the zinc and passes through a delivery tube into soap solution, making soap bubbles filled with hydrogen. A bubble that reaches a burning candle bursts with a pop sound.Pop!Delivery tubeTest tubeDilutesulphuric acidHydrogen gasZinc granulesStandSoap bubble filledwith hydrogenSoap solutionCandle
Figure 2. Zinc and dilute sulphuric acid give hydrogen. A soap bubble filled with hydrogen bursts with a pop at a flame.
  1. Take about 5 mL of dilute sulphuric acid in a test tube and add a few zinc granules (with a teacher’s help).
  2. Pass the gas through soap solution using a delivery tube. Soap bubbles filled with the gas form and rise.
  3. Bring a burning candle near a gas-filled bubble.
  • Seen: bubbles of gas on the surface of the zinc; soap bubbles rise; a bubble near the flame bursts with a pop sound.
  • The pop shows the gas is hydrogen. Hydrogen burns with a pop.
  • Dilute hydrochloric acid gives the same result. Acetic acid gives hydrogen more slowly, as it is a weak acid.

Acid + metal

Acid + Metal → Salt + Hydrogen gas
The metal displaces hydrogen from the acid. The compound left is a salt.

Zn(s)zinc+H2SO4(aq)sulphuric acid→ZnSO4(aq)zinc sulphate+H2(g)hydrogen
Metal + acidEquation
Zinc + hydrochloric acidZn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
Magnesium + hydrochloric acidMg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
Aluminium + sulphuric acid2Al(s) + 3H2SO4(aq) → Al2(SO4)3(aq) + 3H2(g)
Iron + hydrochloric acidFe(s) + 2HCl(aq) → FeCl2(aq) + H2(g)
Iron + sulphuric acidFe(s) + H2SO4(aq) → FeSO4(aq) + H2(g)

Salt

A salt is a compound formed when the hydrogen of an acid is replaced by a metal (or by an ammonium group). Example: zinc sulphate from sulphuric acid.

  • Test for hydrogen: bring a burning splint or candle near the gas. It burns with a pop sound.
  • Metals below hydrogen in the reactivity series, such as copper and silver, do not give hydrogen with dilute acids.
  • Nitric acid is an exception. It is a strong oxidising agent, so it usually turns the hydrogen into water. (Only magnesium and manganese give hydrogen with very dilute nitric acid.)

Base + metal (Activity 2.4)

Warm a few zinc granules with 2 mL of sodium hydroxide solution, then test the gas as before. It burns with a pop: hydrogen again.

2NaOHsodium hydroxide+Zn→Na2ZnO2sodium zincate+H2hydrogen

The zinc is warmed with the alkali.

2NaOH+2Al+2H2O→2NaAlO2sodium aluminate+3H2

Aluminium also reacts with sodium hydroxide.

  • Base + Metal → Salt + Hydrogen gas. The salt has a negative ion made of the metal and oxygen (zincate, aluminate).
  • Only a few metals, such as zinc and aluminium, react with bases. Most metals do not.

Remember

  • Acid + metal → salt + hydrogen. Hydrogen burns with a pop.
  • Zinc with sodium hydroxide gives sodium zincate, Na2ZnO2, and hydrogen.
  • Copper does not give hydrogen with dilute acids; nitric acid usually gives no hydrogen.
Quick checkName the gas and the salt formed when a magnesium ribbon is put in dilute hydrochloric acid. Write the equation.Show answer

Hydrogen gas and magnesium chloride.

Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)

3Acids with metal carbonates and hydrogencarbonates

Activity 2.5

Sodium carbonate and dilute hydrochloric acid in a boiling tube held on a stand. The acid is added through a thistle funnel. Carbon dioxide gas passes through a delivery tube into lime water in a test tube, and the lime water turns milky.AThistle funnelDelivery tubeCorkCarbon dioxidegasDilutehydro-chloricacidSodiumcarbonateLime waterturns milky
Figure 3. Carbon dioxide from sodium carbonate and dilute hydrochloric acid turns lime water milky.
  1. Take about 0.5 g of sodium carbonate in test tube A and 0.5 g of sodium hydrogencarbonate in test tube B.
  2. Add about 2 mL of dilute hydrochloric acid to each.
  3. Pass the gas from each tube through lime water (calcium hydroxide solution).
  • Seen: brisk fizzing (effervescence) in both tubes. A colourless gas comes off.
  • The gas turns lime water milky, so it is carbon dioxide.
Na2CO3(s)tube A: sodium carbonate+2HCl(aq)→2NaCl(aq)+H2O(l)+CO2(g)
NaHCO3(s)tube B: sodium hydrogencarbonate+HCl(aq)→NaCl(aq)+H2O(l)+CO2(g)

Acid + carbonate or hydrogencarbonate

Metal carbonate (or metal hydrogencarbonate) + Acid → Salt + Carbon dioxide + Water

Test for carbon dioxide: lime water

Ca(OH)2(aq)lime water+CO2(g)→CaCO3(s)white precipitate+H2O(l)
  • The milkiness is a fine white precipitate of calcium carbonate.
  • With excess carbon dioxide, the milkiness disappears. Soluble calcium hydrogencarbonate forms:
CaCO3(s)+H2O(l)+CO2(g)→Ca(HCO3)2(aq)soluble in water

Carbon dioxide also puts out a burning candle, because it does not support burning.

More examples

ReactantsEquation
Limestone, chalk, marble or egg shell (all calcium carbonate) + hydrochloric acidCaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)
Magnesium carbonate + sulphuric acidMgCO3(s) + H2SO4(aq) → MgSO4(aq) + H2O(l) + CO2(g)
Sodium hydrogencarbonate + sulphuric acid2NaHCO3(aq) + H2SO4(aq) → Na2SO4(aq) + 2H2O(l) + 2CO2(g)

Limestone, chalk and marble are different forms of calcium carbonate. Acid rain slowly eats away marble buildings and statues by this reaction.

A soda-acid fire extinguisher

(a) A wash-bottle holds sodium hydrogencarbonate solution. A small ignition tube of dilute sulphuric acid hangs inside it from a thread, above the solution. The bottle is closed and has a nozzle. (b) When the bottle is tipped over, the acid mixes with the solution. Carbon dioxide forms and pushes froth out of the nozzle onto a burning candle, which goes out.NozzleThreadIgnition tubeof dilutesulphuric acidSodiumhydrogen-carbonateWash-bottle(a)Froth withcarbon dioxideCandlegoes out(b)
Figure 4. A model soda-acid fire extinguisher made from a wash-bottle.
  1. Put 20 mL of sodium hydrogencarbonate solution in a wash-bottle.
  2. Hang a small ignition tube of dilute sulphuric acid inside it with a thread, and close the bottle.
  3. Tilt the bottle so the acid mixes with the solution.

Carbon dioxide forms quickly and pushes a frothy discharge out of the nozzle. Directed at a burning candle, it puts the flame out.

Remember

  • Carbonate or hydrogencarbonate + acid → salt + carbon dioxide + water.
  • Carbon dioxide turns lime water milky; excess carbon dioxide clears it again.
  • Limestone, chalk, marble and egg shells are calcium carbonate.
Quick checkA solution reacts with crushed egg shells and gives a gas that turns lime water milky. What kind of substance is the solution?Show answer

An acid, such as dilute hydrochloric acid. Egg shells are calcium carbonate, which reacts with an acid to give carbon dioxide.

4Neutralisation, and metal and non-metal oxides

Acid + base (Activity 2.6)

Three stages of a test tube of sodium hydroxide solution with phenolphthalein. At first it is pink. When dilute hydrochloric acid is added drop by drop, the pink colour disappears: the base has been neutralised. When a few drops of sodium hydroxide are added again, the pink colour comes back.addaddDilute HCl,drop by dropA few dropsof NaOHNaOH solution +phenolphthaleinPinkbasicColourlessneutralisedPink againbasic again
Figure 5. Phenolphthalein shows when a base has been neutralised by an acid.
  1. Take about 2 mL of dilute NaOH solution and add two drops of phenolphthalein. The solution turns pink (basic).
  2. Add dilute HCl drop by drop. The pink colour disappears: the base has been neutralised and the solution is no longer basic.
  3. Add a few drops of NaOH again. The pink colour comes back, as the solution is basic again.

Neutralisation

The reaction between an acid and a base to give a salt and water. The acid and the base cancel each other’s effect.
Base + Acid → Salt + Water

NaOH(aq)base+HCl(aq)acid→NaCl(aq)salt+H2O(l)water

In water, every acid gives H+ ions and every base gives OH− ions. Neutralisation is really these two ions joining to form water:

HX+MOH→MX+HOH

HX stands for any acid and MOH for any base. The H of the acid and the OH of the base form water, H–OH.

H+(aq)+OH−(aq)→H2O(l)
Acid + baseEquationSalt formed
Sulphuric acid + sodium hydroxideH2SO4 + 2NaOH → Na2SO4 + 2H2OSodium sulphate
Nitric acid + potassium hydroxideHNO3 + KOH → KNO3 + H2OPotassium nitrate
Hydrochloric acid + calcium hydroxide2HCl + Ca(OH)2 → CaCl2 + 2H2OCalcium chloride
Hydrochloric acid + magnesium hydroxide2HCl + Mg(OH)2 → MgCl2 + 2H2OMagnesium chloride
Hydrochloric acid + ammonium hydroxideHCl + NH4OH → NH4Cl + H2OAmmonium chloride
  • Neutralisation gives out heat: it is exothermic.
  • The acid and the base exchange ions, so it is also a double displacement reaction.

Metal oxide + acid (Activity 2.7)

Add dilute hydrochloric acid slowly to a little black copper(II) oxide, with stirring. The oxide dissolves and the solution turns blue-green, the colour of copper(II) chloride.

CuO(s)copper(II) oxide, black+2HCl(aq)→CuCl2(aq)copper(II) chloride, blue-green+H2O(l)

Basic oxides

Metal oxide + Acid → Salt + Water
This is like a base reacting with an acid, so metal oxides are basic oxides.

More examples: MgO + 2HCl → MgCl2 + H2O and CaO + 2HCl → CaCl2 + H2O.

Non-metal oxide + base

Ca(OH)2(aq)base+CO2(g)non-metal oxide→CaCO3(s)salt+H2O(l)water

Acidic oxides

Non-metal oxide + Base → Salt + Water
This is like an acid reacting with a base, so non-metal oxides are acidic oxides.

More examples: 2NaOH + CO2 → Na2CO3 + H2O. With water, carbon dioxide gives carbonic acid, CO2 + H2O → H2CO3, and sulphur dioxide gives sulphurous acid, SO2 + H2O → H2SO3.

Six reactions to learn

ReactionGeneral formExample
Acid + metalSalt + hydrogenZn + H2SO4 → ZnSO4 + H2
Base + metalSalt + hydrogen2NaOH + Zn → Na2ZnO2 + H2
Acid + carbonate or hydrogencarbonateSalt + carbon dioxide + waterNa2CO3 + 2HCl → 2NaCl + H2O + CO2
Acid + base (neutralisation)Salt + waterNaOH + HCl → NaCl + H2O
Metal oxide + acidSalt + waterCuO + 2HCl → CuCl2 + H2O
Non-metal oxide + baseSalt + waterCa(OH)2 + CO2 → CaCO3 + H2O

Remember

  • Acid + base → salt + water: neutralisation. In ions: H+ + OH− → H2O.
  • Metal oxides are basic; non-metal oxides are acidic.
  • Phenolphthalein: pink in a base, colourless once the base is neutralised.
Quick checkCopper(II) oxide dissolves in dilute hydrochloric acid. What colour is the solution, and why is copper(II) oxide called a basic oxide?Show answer

The solution is blue-green (copper(II) chloride). Copper(II) oxide reacts with an acid to give a salt and water, just as a base does, so it is a basic oxide.

5Acids and bases in water: ions and dilution

Acid solutions conduct electricity (Activity 2.8)

Two beakers, each with two nails fixed in a rubber cork. The nails are joined to a 6 volt battery, a switch and a bulb. With dilute hydrochloric acid in the beaker, the bulb glows: the acid solution conducts electricity. With glucose solution, the bulb does not glow.Dilute HClBulb glowsGlucose solutionBulb does not glow6 V batteryBulbBeakerNailRubbercorkSwitch
Figure 6. The bulb glows with dilute hydrochloric acid in the beaker, but not with glucose solution.

Fix two nails in a rubber cork in a beaker. Join them to a 6 V battery through a bulb and a switch. Pour in each solution in turn and switch on.

SolutionBulbReason
Dilute hydrochloric acidGlowsIons: H+ and Cl−
Dilute sulphuric acidGlowsIons: H+ and SO42−
Glucose solutionDoes not glowNo ions
Alcohol solutionDoes not glowNo ions
Sodium hydroxide solution (an alkali)GlowsIons: Na+ and OH−
  • Electric current is carried through a solution by ions. A glowing bulb means the solution has ions.
  • Glucose and alcohol contain hydrogen, but they do not give H+ ions in water. So they are not acids.
  • Every acid gives hydrogen ions, H+(aq), in water. These ions cause the acidic properties.
AcidPositive ion (cation)Negative ion (anion)
Hydrochloric acid, HClH+Cl− (chloride)
Nitric acid, HNO3H+NO3− (nitrate)
Sulphuric acid, H2SO4H+SO42− (sulphate)
Acetic acid, CH3COOHH+CH3COO− (acetate)

Do acids form ions without water? (Activity 2.9)

Concentrated sulphuric acid is added to sodium chloride in a test tube. Hydrogen chloride gas comes out through a delivery tube and a guard tube of calcium chloride, which dries it. The dry gas does not change the colour of dry blue litmus paper, but it turns moist blue litmus paper red.Dryno changeMoistturns redBlue litmus paperGuard tube with calciumchloride: dries the gasHCl gasConcentratedsulphuric acidaddedSodiumchloride
Figure 7. Dry hydrogen chloride gas changes moist blue litmus, but not dry blue litmus.
  1. Add concentrated sulphuric acid to about 1 g of dry sodium chloride in a dry test tube. Hydrogen chloride gas comes out of the delivery tube.
  2. In humid weather, pass the gas through a guard tube of calcium chloride to dry it.
  3. Test the gas with dry blue litmus paper, then with moist blue litmus paper.
NaCl(s)sodium chloride+H2SO4(l)→NaHSO4(s)+HCl(g)hydrogen chloride gas
  • Dry litmus: no change. Moist litmus: turns red.
  • So dry HCl gas is not acidic. HCl gives H+ ions only when water is present. An HCl solution is acidic.
HCl+H2O→H3O+hydronium ion+Cl−chloride ion
A molecule of hydrogen chloride and a molecule of water. The hydrogen of H C l moves to the water molecule, giving a hydronium ion, H 3 O plus, and a chloride ion, C l minus.+++−HClhydrogenchlorideH2OwaterH3O+hydronium ionCl−chloride ionHOCl
Figure 8. In water, hydrogen chloride gives its hydrogen ion to a water molecule.

Hydronium ion

A hydrogen ion cannot exist alone. It joins a water molecule to form the hydronium ion, H3O+. So hydrogen ions are always written as H+(aq) or H3O+.

H++H2O→H3O+

Bases in water

Bases give hydroxide ions, OH−(aq), in water:

NaOH(s)H2O gives Na+(aq)+OH−(aq)
KOH(s)H2O gives K+(aq)+OH−(aq)
Mg(OH)2(s)H2O gives Mg2+(aq)+2OH−(aq)

Alkali

A base that dissolves in water is an alkali. Alkalis feel soapy, taste bitter and are corrosive. Examples: NaOH, KOH, Ca(OH)2 and NH4OH.

  • All alkalis are bases, but not all bases are alkalis. Copper(II) oxide and copper(II) hydroxide are bases that do not dissolve in water. Magnesium hydroxide dissolves only very slightly.
  • Distilled water has almost no ions, so it does not conduct electricity. Rain water has dissolved gases (such as carbon dioxide, which forms an acid) and so has ions; it conducts.

Mixing acids and bases with water: dilution (Activity 2.10)

Add a few drops of concentrated sulphuric acid to 10 mL of water and touch the beaker: it becomes hot. Sodium hydroxide pellets do the same. Dissolving an acid or a base in water is highly exothermic.

Diluting a concentrated acid. Right: the acid is poured slowly into a large amount of water, down a glass rod, with stirring. Wrong: water poured into the acid heats it so much that the mixture splashes out and the glass may crack.✓Acid into water✗Water into acidSlowly, with stirringSplashes, glass may crack
Figure 9. Always add the acid to the water, slowly and with stirring.
  • Always add acid to water, slowly, with constant stirring. The large amount of water takes up the heat.
  • Never add water to a concentrated acid. The heat can make the mixture splash out and cause burns, and the glass may crack from heating in one spot.
  • Cans of concentrated sulphuric acid and bottles of sodium hydroxide pellets carry a warning sign (Figure 10).
A warning sign: a white triangle with a red border. Liquid dripping from two test tubes eats away a metal bar and a surface. It warns that the substance is corrosive.Corrosive
Figure 10. The warning sign for corrosive substances.

Dilution

Mixing an acid or a base with water. The concentration of ions (H3O+ or OH−) per unit volume decreases, and the acid or base is said to be diluted.

Remember

  • Acids give H+(aq), that is H3O+, in water; bases give OH−(aq).
  • Dry HCl gas does not change dry litmus: no water, no H+ ions.
  • Acid into water, never water into acid.
Quick checkGlucose, C6H12O6, contains hydrogen. Why is it not an acid?Show answer

Glucose does not give H+ ions in water. Its solution does not conduct electricity and does not turn blue litmus red, so it is not an acid.

6The pH scale, and strong and weak acids

Universal indicator

A mixture of several indicators. It shows a different colour at each concentration of hydrogen ions, so it tells you how acidic or basic a solution is. It is often used as paper soaked in it: pH paper.

pH scale

A scale, usually from 0 to 14, that measures the hydrogen ion concentration of a solution. The p stands for potenz, German for power.

The pH scale from 0 to 14 with the colours of universal indicator: red at pH 0, through orange and yellow to green at pH 7, then blue to violet at pH 14. Below pH 7 a solution is acidic, at 7 it is neutral, above 7 it is basic. More hydrogen ions mean a lower pH. Gastric juice is about 1.2, lemon juice about 2.2, pure water 7, blood about 7.4, milk of magnesia about 10 and sodium hydroxide solution about 14.01234567891011121314NeutralMore acidic: more H+ ionsMore basic: more OH− ionsGastric juiceabout 1.2Lemon juiceabout 2.2Pure water7Bloodabout 7.4Milk of magnesiaabout 10Sodium hydroxidesolution, about 14
Figure 11. The pH scale, with the colours of universal indicator and some everyday examples (colours are a rough guide).
  • pH 7: neutral (pure water).
  • Below 7: acidic. The lower the pH, the more acidic.
  • Above 7: basic (alkaline). The higher the pH, the more basic: more OH− ions.
  • More H3O+ ions means a lower pH.
pHNatureUniversal indicatorExamples
0 to 2Strongly acidicRed1 M HCl (0), gastric juice (about 1.2), lemon juice (about 2.2)
3 to 6Weakly acidicOrange to yellowVinegar, tomato juice, coffee, fresh milk (about 6)
7NeutralGreenPure water, salt solution, sugar solution
8 to 10Weakly basicBlueBlood (about 7.4), baking soda solution, milk of magnesia (about 10)
11 to 14Strongly basicVioletLime water, 1 M NaOH (14)

pH of some common solutions (Activity 2.11)

Approximate values; they vary from sample to sample, and colours vary a little between makes of pH paper.

SolutionApproximate pHNature
Saliva before a mealAbout 7.4Slightly basic
Saliva after a mealAbout 5.8Acidic
Lemon juiceAbout 2.2Acidic
Colourless aerated drinkAbout 3 to 4Acidic
Carrot juiceAbout 6Slightly acidic
CoffeeAbout 5Acidic
Tomato juiceAbout 4Acidic
Tap waterAbout 7Nearly neutral
1 M NaOH14Strongly basic
1 M HCl0Strongly acidic

Strong and weak acids and bases

The strength of an acid depends on how many H+ ions it gives. Take hydrochloric acid and acetic acid of the same concentration (say 1 M): hydrochloric acid gives far more H+ ions.

Two beakers of acid of the same concentration. In hydrochloric acid, a strong acid, every molecule has split into a hydrogen ion and a chloride ion. In acetic acid, a weak acid, most molecules stay whole and only a few split into ions, so there are far fewer hydrogen ions.++++++−−−−−−Hydrochloric acidstrong acidevery molecule gives H⁺+−Acetic acidweak acidonly a few molecules give H⁺+H+ ion−negative ionwhole molecule
Figure 12. At the same concentration, a strong acid gives many more hydrogen ions than a weak acid.
StrongWeak
MeaningGives many H+ (or OH−) ions: almost every molecule splitsGives few ions: only some molecules split
AcidsHydrochloric, sulphuric, nitric acidAcetic, citric, tartaric, lactic, carbonic, methanoic acid
BasesSodium hydroxide, potassium hydroxideAmmonium hydroxide, magnesium hydroxide
With magnesium (same concentration)Fast, vigorous fizzingSlower fizzing

Common mistake: strong and weak are not the same as concentrated and dilute. Concentrated or dilute tells how much acid is in a volume of water. Strong or weak tells how much of the acid splits into ions.

Remember

  • pH below 7 acidic, 7 neutral, above 7 basic.
  • Lower pH = more H3O+ ions = more acidic.
  • Same concentration: HCl (strong) gives more H+ than CH3COOH (weak), so it reacts faster.
Quick checkSolution P has a pH of 2 and solution Q a pH of 5. Which has more hydrogen ions? What colour would each give with universal indicator?Show answer

P has more hydrogen ions, because its pH is lower. P gives red; Q gives yellow (orange-yellow).

Try it yourselfSort everyday substances on the pH scale, name the colours of indicators and balance this chapter’s equations in the pH lab.

7pH in everyday life

Plants and animals

  • Our body works within a pH range of 7.0 to 7.8. Living things survive only within a narrow range of pH.
  • Acid rain is rain with a pH below 5.6. It lowers the pH of rivers, making it hard for fish and other water life to survive.
  • The atmosphere of Venus has thick white and yellowish clouds of sulphuric acid.

Soil pH (Activity 2.12)

  1. Put about 2 g of soil in a test tube and add 5 mL of water. Shake.
  2. Filter, and test the pH of the filtrate with universal indicator paper.
  • Each plant grows best in a certain pH range.
  • Soil that is too acidic is treated with a base: quick lime (calcium oxide), slaked lime (calcium hydroxide) or chalk (calcium carbonate).
  • Soil that is too basic is treated with organic matter such as manure or compost, which releases acids as it decays.

pH in the digestive system

  • The stomach makes hydrochloric acid. It helps digestion without harming the stomach.
  • In indigestion the stomach makes too much acid, causing pain and irritation.
  • Antacids are mild bases that neutralise the extra acid. Example: magnesium hydroxide (milk of magnesia). Baking soda is also used.
Mg(OH)2milk of magnesia+2HClstomach acid→MgCl2+2H2O

Tooth decay

A graph of the pH in the mouth against time after a sugary snack. The pH starts near 7, falls below 5.5 within about 10 minutes as bacteria make acid from the sugar, stays there for a while, and slowly rises back towards 7 over about an hour. Below pH 5.5 tooth enamel is attacked.456780102030405060Sugary snack eatenBelow pH 5.5: tooth enamel is attackedpH 5.5Time after eating (minutes)pH in the mouth
Figure 13. After a sugary snack, the pH in the mouth falls below 5.5 for a while (a typical pattern).
  • Tooth enamel is calcium hydroxyapatite (a crystalline form of calcium phosphate), the hardest substance in the body. It does not dissolve in water.
  • Bacteria in the mouth break down sugar and food left after eating and make acids.
  • Tooth decay starts when the pH in the mouth falls below 5.5: the enamel is corroded.
  • Prevention: clean the mouth after eating. Toothpastes are generally basic and neutralise the extra acid.

Stings: self-defence with chemicals

StingWhat it leavesRelief
Honey-bee stingAn acid (pain and irritation)Rub on a mild base such as baking soda
Nettle leafMethanoic acid, from its stinging hairsRub with a dock leaf (a basic remedy), which grows near nettles
Ant stingMethanoic acidA mild base such as baking soda

Acids in nature

Natural sourceAcid
VinegarAcetic acid
Orange, lemonCitric acid
TamarindTartaric acid
TomatoOxalic acid
Sour milk (curd)Lactic acid
Ant sting, nettle stingMethanoic acid
  • Fresh milk has a pH of about 6. As it turns into curd, lactic acid forms and the pH falls.
  • A pinch of baking soda makes milk slightly basic. It keeps longer, but takes longer to set into curd, because the lactic acid made first is neutralised.

Remember

  • Body pH 7.0 to 7.8; acid rain below 5.6; tooth decay below pH 5.5.
  • Antacids (milk of magnesia, baking soda) neutralise extra stomach acid.
  • Acidic soil: add quick lime, slaked lime or chalk.
Quick checkWhy is it better to brush your teeth after eating sweets?Show answer

Bacteria break down the sugar left in the mouth into acids, and the pH falls below 5.5, which corrodes tooth enamel. Brushing removes the sugar, and the basic toothpaste neutralises the acid.

8Salts: families and pH

Salt

An ionic compound formed, with water, when an acid neutralises a base. It is made of a positive ion from the base (a metal ion or ammonium) and a negative ion from the acid.

Salts and where they come from (Activity 2.13)

SaltFormulaAcidBase
Potassium sulphateK2SO4H2SO4KOH
Sodium sulphateNa2SO4H2SO4NaOH
Calcium sulphateCaSO4H2SO4Ca(OH)2
Magnesium sulphateMgSO4H2SO4Mg(OH)2
Copper sulphateCuSO4H2SO4Cu(OH)2
Sodium chlorideNaClHClNaOH
Sodium nitrateNaNO3HNO3NaOH
Sodium carbonateNa2CO3H2CO3NaOH
Ammonium chlorideNH4ClHClNH4OH

Family of salts

Salts with the same positive ion or the same negative ion belong to one family.

  • Sodium salts: NaCl, Na2SO4, NaNO3, Na2CO3.
  • Sulphate salts: K2SO4, Na2SO4, CaSO4, MgSO4, CuSO4.
  • Chloride salts: NaCl, NH4Cl.

pH of salts (Activity 2.14)

Salt made fromNature of the salt solutionExamples
Strong acid + strong baseNeutral, pH 7NaCl, KNO3, Na2SO4
Strong acid + weak baseAcidic, pH below 7NH4Cl, CuSO4, ZnSO4, AlCl3
Weak acid + strong baseBasic, pH above 7Na2CO3, NaHCO3, CH3COONa
SaltpHAcid usedBase used
Sodium chloride7HCl (strong)NaOH (strong)
Potassium nitrate7HNO3 (strong)KOH (strong)
Aluminium chlorideBelow 7HCl (strong)Al(OH)3 (weak)
Zinc sulphateBelow 7H2SO4 (strong)Zn(OH)2 (weak)
Copper sulphateBelow 7H2SO4 (strong)Cu(OH)2 (weak)
Sodium acetateAbove 7CH3COOH (weak)NaOH (strong)
Sodium carbonateAbove 7H2CO3 (weak)NaOH (strong)
Sodium hydrogencarbonateAbove 7H2CO3 (weak)NaOH (strong)

The stronger partner wins: a salt of a strong acid and a weak base is acidic; a salt of a weak acid and a strong base is basic.

Common salt

  • Common salt, sodium chloride, is the salt of hydrochloric acid and sodium hydroxide. It is neutral. It is the salt we use in food.
  • It is separated from seawater, which has many salts dissolved in it.
  • Rock salt: large crystals of salt found in the ground, often brown because of impurities. Beds of rock salt formed when ancient seas dried up. It is mined like coal.
  • Salt has been important in history. In India’s freedom struggle, Mahatma Gandhi led the Dandi March (1930) to make salt from seawater, against a tax on salt.

Remember

  • Salt = positive ion from a base + negative ion from an acid.
  • Strong acid + strong base: neutral salt (pH 7). Strong acid + weak base: acidic. Weak acid + strong base: basic.
  • Sodium chloride is neutral; sodium carbonate and baking soda are basic; ammonium chloride is acidic.
Quick checkIs a solution of sodium carbonate acidic, basic or neutral? Explain.Show answer

Basic (pH above 7). Sodium carbonate is the salt of a weak acid (carbonic acid) and a strong base (sodium hydroxide).

9Chemicals from common salt

Common salt is the raw material for many everyday chemicals: sodium hydroxide, bleaching powder, baking soda, washing soda and more.

Chemicals made from common salt. Electrolysis of brine gives sodium hydroxide, chlorine and hydrogen. Chlorine with dry slaked lime gives bleaching powder. Salt with water, carbon dioxide and ammonia gives baking soda, sodium hydrogencarbonate. Heating baking soda gives sodium carbonate, and sodium carbonate with ten molecules of water gives washing soda.Common saltNaClElectrolysis of brine(chlor-alkali process)+ H2O + CO2 + NH3NaOH + Cl2 + H2Baking sodaNaHCO3Cl2 + dry Ca(OH)2HeatBleaching powderCa(ClO)2Sodium carbonateNa2CO3+ 10H2OWashing sodaNa2CO3·10H2O
Figure 14. Chemicals made from common salt.

Sodium hydroxide: the chlor-alkali process

Chlor-alkali process

Passing electricity through brine (a concentrated solution of sodium chloride in water). It is named after its products: chlor for chlorine and alkali for sodium hydroxide.

2NaCl(aq)brine+2H2O(l)Electricity gives 2NaOH(aq)+Cl2(g)+H2(g)
The chlor-alkali process. Brine flows into a cell with an anode (positive) and a cathode (negative) separated by a membrane. Chlorine gas comes off at the anode and hydrogen gas at the cathode. Sodium hydroxide solution forms near the cathode and flows out.+ −Cl2 gasH2 gasBrine inSodiumhydroxidesolution outCl−Na+ OH−Anode (+)Cathode (−)Membrane: lets Na+ ions through
Figure 15. The chlor-alkali process.
  • Chlorine gas is given off at the anode (+).
  • Hydrogen gas is given off at the cathode (−).
  • Sodium hydroxide solution forms near the cathode.
ProductUses
Chlorine, Cl2Water treatment, swimming pools, PVC, disinfectants, CFCs, pesticides; making bleaching powder
Hydrogen, H2Fuels, margarine (hydrogenating oils), ammonia for fertilisers
Sodium hydroxide, NaOHDe-greasing metals, soaps and detergents, paper making, artificial fibres

Bleaching powder

Made by the action of chlorine (from the chlor-alkali process) on dry slaked lime, Ca(OH)2:

2Ca(OH)2dry slaked lime+2Cl2→Ca(ClO)2calcium hypochlorite+CaCl2+2H2O
  • Bleaching powder is represented as Ca(ClO)2, though its real composition is complex. (Older books write it as CaOCl2.) It smells strongly of chlorine.
  • Uses: bleaching cotton and linen in the textile industry, wood pulp in paper factories, and washed clothes in laundries; as an oxidising agent in chemical industries; to make drinking water free from germs.

Baking soda: sodium hydrogencarbonate, NaHCO3

NaCl+H2O+CO2+NH3→NH4Clammonium chloride+NaHCO3sodium hydrogencarbonate
  • A mild, non-corrosive basic salt, so it can neutralise an acid safely.
  • Used in cooking to make fried snacks crisp and to cook some foods faster.
  • On heating (as in cooking) it gives sodium carbonate, water and carbon dioxide:
2NaHCO3sodium hydrogencarbonateHeat gives Na2CO3sodium carbonate+H2O+CO2

Uses of baking soda:

  1. Baking powder is baking soda mixed with tartaric acid, a weak edible acid. When it is heated or mixed with water:
    NaHCO3+H+from any acid→CO2+H2O+Sodium salt of acid
    The carbon dioxide makes bread and cakes rise, so they are soft and spongy. The acid also stops bitter-tasting sodium carbonate forming.
  2. An ingredient in antacids: being alkaline, it neutralises extra acid in the stomach.
  3. Used in soda-acid fire extinguishers (Figure 4).

Washing soda: Na2CO3·10H2O

Heating baking soda gives sodium carbonate. Recrystallising sodium carbonate from water gives washing soda, a basic salt:

Na2CO3sodium carbonate+10H2O→Na2CO3·10H2Owashing soda

Uses of washing soda:

  1. In the glass, soap and paper industries.
  2. To make sodium compounds such as borax.
  3. As a cleaning agent in the home.
  4. To remove the permanent hardness of water: it turns the dissolved calcium and magnesium salts into insoluble carbonates. For example, CaCl2(aq) + Na2CO3(aq) → CaCO3(s) + 2NaCl(aq).
Baking sodaWashing soda
Chemical nameSodium hydrogencarbonateSodium carbonate decahydrate
FormulaNaHCO3Na2CO3·10H2O
NatureMild, non-corrosive baseBasic salt; stronger base
Main usesBaking powder, antacids, fire extinguishersGlass, soap, paper, borax, cleaning, softening hard water

Remember

  • Brine + electricity → NaOH + Cl2 (anode) + H2 (cathode).
  • Chlorine + dry slaked lime → bleaching powder, Ca(ClO)2.
  • Baking soda NaHCO3 on heating → Na2CO3; with 10 water molecules → washing soda.
Quick checkWhat happens when baking soda is heated? Write the equation.Show answer

It breaks down into sodium carbonate, water and carbon dioxide:

2NaHCO3 Heat gives Na2CO3 + H2O + CO2

10Water of crystallisation and plaster of Paris

Water of crystallisation

The fixed number of water molecules present in one formula unit of a salt. Salts that have it are hydrated salts. Their crystals look dry: the water is part of the crystal, not wetness.

Heating copper sulphate crystals (Activity 2.15)

Blue copper sulphate crystals heated in a dry boiling tube held at a slant over a burner. The crystals turn white and water droplets appear near the mouth of the tube.Water dropletsnear the mouthBlue crystalsturn whiteBurnerHolder(a) Heating blue crystals
A few drops of water are added to the white powder left after heating. The powder turns blue again where the water touches it.Drops ofwaterWhite powder turnsblue where it is wet(b) Adding water
Figure 16. Copper sulphate crystals lose their water of crystallisation on heating and turn white. Water brings the blue colour back.
  • On heating, the blue crystals turn white, and water droplets appear near the mouth of the tube. The water came from the crystals.
  • Add 2–3 drops of water to the white powder: it turns blue again.
CuSO4·5H2OblueHeat gives CuSO4white (anhydrous)+5H2O
CuSO4white+5H2O→CuSO4·5H2Oblue
Hydrated saltFormulaWater molecules
Copper sulphate (blue vitriol)CuSO4·5H2O5
Washing sodaNa2CO3·10H2O10
GypsumCaSO4·2H2O2
Ferrous sulphate (green vitriol)FeSO4·7H2O7
Plaster of ParisCaSO4·12H2O12

Plaster of Paris

Plaster of Paris

Calcium sulphate hemihydrate, CaSO4·12H2O. A white powder made by heating gypsum at 373 K (100 °C).

CaSO4·2H2Ogypsum373 K gives CaSO4·12H2Oplaster of Paris+112H2O

On mixing with water, it changes back into gypsum and sets into a hard solid mass:

CaSO4·12H2Oplaster of Paris+112H2O→CaSO4·2H2Ogypsum
Gypsum, calcium sulphate with two molecules of water, is heated at 373 kelvin. It loses one and a half molecules of water and becomes plaster of Paris, calcium sulphate with half a molecule of water. When water is added, plaster of Paris takes up one and a half molecules of water and sets into a hard mass of gypsum again.GypsumCaSO4·2H2OPlaster of ParisCaSO4·12H2OHeat at 373 K (100 °C)loses 112H2OAdd water: sets into a hard massgains 112H2O
Figure 17. Gypsum and plaster of Paris change into each other.
  • Why half a water molecule? Two formula units of CaSO4 share one molecule of water. The formula can also be written (CaSO4)2·H2O.
  • Uses: plaster for supporting fractured bones in the right position; making toys and decorative materials; making surfaces smooth.
  • Store it in a moisture-proof container: moisture from the air would make it set into hard gypsum.
  • Do not heat gypsum much above 373 K: it loses all its water and the product no longer sets well.
  • The name comes from the large deposits of gypsum near Paris, where it was first made in large amounts.

Remember

  • Blue CuSO4·5H2O turns white on heating; water turns it blue again.
  • Gypsum CaSO4·2H2O at 373 K → plaster of Paris CaSO4·12H2O.
  • Plaster of Paris + water → gypsum, a hard mass. Keep it dry.
Quick checkWhy does a doctor’s plaster of Paris bandage become hard after it is wetted?Show answer

Plaster of Paris reacts with water and changes back into gypsum, which sets into a hard solid mass:

CaSO4·12H2O + 112H2O → CaSO4·2H2O

Test yourselfTake the 25-question practice quiz on this chapter. Revising for the board exam?Get the Chapter 2 revision PDF: quick notes, 20 new board-pattern questions and full answers, for ₹49.