Chapter 1 · Chemistry

Chemical Reactions and Equations

How substances change into new substances, how to write and balance chemical equations, the main types of reactions, and oxidation in everyday life.

Done reading? Try the Equation lab activity on this chapter.
In this chapter 10 topics
  1. 1Chemical reactions and how to spot them
  2. 2Writing chemical equations
  3. 3Balancing chemical equations
  4. 4Combination reactions
  5. 5Decomposition reactions
  6. 6Exothermic and endothermic reactions
  7. 7Displacement reactions
  8. 8Double displacement reactions
  9. 9Oxidation and reduction (redox)
  10. 10Corrosion and rancidity

1Chemical reactions and how to spot them

Milk turns sour if left out on a hot day. An iron nail rusts in damp air. Grapes ferment. Food changes when it is cooked and when it is digested. We breathe and release energy from food. In each case, the starting substance becomes a new substance with new properties.

Chemical reaction

A chemical reaction is a change in which one or more substances turn into new substances with different properties. Every chemical change is a chemical reaction.

Physical changeChemical change
New substance?NoYes
Can it be reversed easily?Usually yesUsually no
CompositionStays the sameChanges
ExamplesMelting ice, dissolving sugar, cutting paperBurning, rusting, cooking, souring of milk

Experiment 1: burning magnesium

A cleaned magnesium ribbon held with tongs burns with a dazzling white light. The white powder that falls, magnesium oxide, is collected in a watch-glass. A burner is used to light the ribbon.TongsMagnesium ribbonDazzlingwhite lightBurnerWatch-glassMagnesiumoxide (ash)
Figure 1. Burning a magnesium ribbon. The white ash is magnesium oxide.
  1. Rub a 3–4 cm piece of magnesium ribbon with sandpaper until it is shiny.
  2. Hold it with tongs and light it in a burner flame. Keep it away from your eyes.
  3. Collect the white ash in a watch-glass.
  • Seen: the ribbon burns with a dazzling white light and leaves a white powder.
  • Why: magnesium joins with oxygen in the air to make magnesium oxide.
  • Why clean it first? Stored magnesium gets a thin coat of magnesium oxide. This coat stops the metal burning easily. Sandpaper removes it.

Experiment 2: lead nitrate and potassium iodide

  • Add potassium iodide solution to lead nitrate solution in a test tube. Both are colourless.
  • Seen: a yellow solid forms at once. It is lead iodide.

Experiment 3: zinc and dilute acid

Zinc granules in dilute sulphuric acid in a conical flask closed with a cork. Bubbles of hydrogen gas form on the zinc and rise out through a glass tube. The flask becomes warm.Glass tubeCorkHydrogen gasDilutesulphuric acidZinc granulesConicalflask
Figure 2. Zinc granules in dilute sulphuric acid give off hydrogen gas.
  • Put a few zinc granules in a conical flask and add dilute hydrochloric acid or dilute sulphuric acid. Handle acids with care.
  • Seen: bubbles of gas form on the zinc. The gas is hydrogen.
  • Felt: the flask becomes warm.

Signs that a chemical reaction has happened

  • Change in state: for example, a solid ribbon becomes a powder, or a solid forms from two liquids.
  • Change in colour: for example, colourless solutions give a yellow solid.
  • A gas is given off (evolution of gas): bubbles or fumes appear.
  • Change in temperature: the mixture gets hot or cold.

A change of smell and the forming of a solid in a solution (a precipitate) are also useful clues. One sign alone does not prove a reaction: melting ice also changes state. Look for a new substance.

ExperimentSigns seen
Burning magnesiumChange in state, light and heat given out
Lead nitrate + potassium iodideChange in colour, a solid forms
Zinc + dilute acidGas given off, change in temperature

Remember

  • A chemical reaction makes a new substance. A physical change does not.
  • Four main signs: change in state, change in colour, a gas given off, change in temperature.
  • Clean magnesium ribbon before burning to remove its coat of magnesium oxide.
Quick checkWhen an antacid tablet is dropped into water, it fizzes. Which sign of a chemical reaction is this?Show answer

A gas is given off (evolution of a gas). The fizzing is bubbles of carbon dioxide.

2Writing chemical equations

Writing a reaction as a sentence is slow. A chemical equation is a short way to show it, using names or formulae.

Reactants and products

Reactants are the substances that react (the starting substances). Products are the new substances formed.

Word equation

A word equation uses the names of the substances.

Magnesiumreactant+Oxygenreactant→Magnesium oxideproduct
  • Reactants go on the left-hand side (LHS). Products go on the right-hand side (RHS).
  • A plus sign (+) separates substances on the same side.
  • The arrow (→) means “gives” or “forms”. It points towards the products.

Chemical equation with formulae

Using formulae instead of names makes the equation shorter and more useful:

Mg+O2→MgO

Skeletal equation: the formulae are right, but there are 2 O atoms on the left and only 1 on the right.

Skeletal equation

A skeletal chemical equation shows the correct formulae of the reactants and products, but the number of atoms of each element is not yet the same on both sides. It is unbalanced.

The parts of a chemical equation: 2 M g (s) plus O 2 (g), heat over the arrow, gives 2 M g O (s). The coefficient, the subscript, the condition over the arrow, the state symbols, the reactants and the product are labelled.2Mg(s)+O2(g)heat2MgO(s)CoefficientSubscriptConditionState symbolsReactants (left side)Product (right side)
Figure 3. The parts of a balanced chemical equation.
  • Coefficient: the number in front of a formula. It tells how many molecules (or formula units). 2Mg means two atoms of magnesium.
  • Subscript: the small number inside a formula. It tells how many atoms are in one molecule. O2 has two oxygen atoms.

State symbols

A complete equation also shows the physical state of each substance:

SymbolStateExample
(s)SolidCaCO3(s), Fe(s)
(l)LiquidH2O(l), water as a liquid
(g)GasH2(g), H2O(g) for steam
(aq)Aqueous: dissolved in waterNaCl(aq), salt solution
3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)

Here (g) with water shows that steam is used.

State symbols are added only when they are needed, or when the question asks for them.

Conditions written on the arrow

Conditions such as heat, light, a catalyst, a temperature or a pressure are written above or below the arrow.

CO(g)+2H2(g)340 atm gives CH3OH(l)methanol
6CO2(aq)+12H2O(l)Sunlight gives ChlorophyllC6H12O6(aq)glucose+6O2(aq)+6H2O(l)

What an equation tells you

  • The reactants and products, and their formulae.
  • How many molecules (or atoms) of each react and form, from the coefficients.
  • Their states, and the conditions needed, when these are shown.

An equation does not tell you how fast a reaction is, or what you will see.

Remember

  • Reactants on the left, products on the right, arrow pointing to the products.
  • Coefficient = number of molecules. Subscript = number of atoms in one molecule.
  • (s) solid, (l) liquid, (g) gas, (aq) dissolved in water.
Quick checkWrite a word equation and a skeletal equation for zinc reacting with sulphuric acid to give zinc sulphate and hydrogen.Show answer

Zinc + Sulphuric acid → Zinc sulphate + Hydrogen

Zn + H2SO4 → ZnSO4 + H2

Counting atoms shows that this one is already balanced: 1 Zn, 2 H, 1 S and 4 O on each side.

3Balancing chemical equations

Law of conservation of mass

Mass is neither created nor destroyed in a chemical reaction. The total mass of the products equals the total mass of the reactants.

In a reaction, atoms are only rearranged. No atom is made, lost or changed into another element. So the number of atoms of each element must be the same on both sides of the equation.

Balanced chemical equation

A balanced chemical equation has the same number of atoms of each element on the reactant side and the product side.

Molecules of hydrogen and oxygen forming water. Top: one hydrogen molecule and one oxygen molecule give one water molecule; there are 2 oxygen atoms on the left but only 1 on the right, so it is not balanced. Bottom: two hydrogen molecules and one oxygen molecule give two water molecules, with 4 hydrogen atoms and 2 oxygen atoms on each side.Skeletal (not balanced)+H: 2, O: 2H: 2, O: 1✗Balanced+H: 4, O: 2H: 4, O: 2✓H atomO atom
Figure 4. Hydrogen and oxygen forming water. Only the balanced equation has the same atoms on both sides.
2H2(g)+O2(g)→2H2O(l)

Steps to balance an equation (hit-and-trial method)

  1. Write the skeletal equation with the correct formulae. Think of each formula as sitting in a box: never change anything inside it.
  2. Count the atoms of each element on each side. A small table helps.
  3. Start with the biggest formula: the compound with the most atoms. In it, pick the element with the most atoms. Balance that element by putting a coefficient in front of a formula.
  4. Balance the other elements one at a time, in the same way.
  5. Check by counting every element again. Use the smallest whole-number coefficients.
  6. Add state symbols (and conditions) if they are needed.

Worked example 1

Balance: Fe + H2O → Fe3O4 + H2

Solution

Atoms in the skeletal equation
ElementLeft sideRight sideEqual?
Fe13No
H22Yes
O14No

Oxygen first (Fe3O4 is the biggest formula, and oxygen has the most atoms in it). 4 O on the right, 1 on the left, so write 4 in front of H2O:

Fe + 4H2O → Fe3O4 + H2

Hydrogen next. Now 8 H on the left (4 × 2) and 2 on the right. Write 4 in front of H2:

Fe + 4H2O → Fe3O4 + 4H2

Iron last. 3 Fe on the right, 1 on the left. Write 3 in front of Fe:

3Fe + 4H2O → Fe3O4 + 4H2

Atoms after balancing
ElementLeft sideRight sideEqual?
Fe33Yes
H88Yes
O44Yes

Balanced: 3Fe(s) + 4H2O(g) → Fe3O4(s) + 4H2(g)

Worked example 2

Balance the equation for burning magnesium: Mg + O2 → MgO

Solution

Oxygen: 2 on the left, 1 on the right. Write 2 in front of MgO:

Mg + O2 → 2MgO

Magnesium: now 2 on the right, 1 on the left. Write 2 in front of Mg:

Balanced: 2Mg(s) + O2(g) → 2MgO(s)

Worked example 3

Balance: CaCl2 + AgNO3 → Ca(NO3)2 + AgCl

Solution

Tip: a group of atoms that stays together on both sides, such as NO3, can be counted as one unit.

NO3: 2 on the right, 1 on the left. Write 2 in front of AgNO3. Now Ag is 2 on the left, so write 2 in front of AgCl. Cl is then 2 on each side.

Balanced: CaCl2 + 2AgNO3 → Ca(NO3)2 + 2AgCl

Common mistakes

MistakeWhy it is wrong
Changing a subscript: H2O to H2O2H2O2 is a different substance (hydrogen peroxide).
Writing H2O4 or (H2O)4Write the coefficient in front: 4H2O.
Leaving 4Mg + 2O2 → 4MgOIt is balanced, but not in the smallest whole numbers. Divide by 2.
Forgetting to check every element at the endFixing one element can upset another.

Remember

  • Atoms are never created or destroyed, so equations must be balanced.
  • Balance by changing coefficients only. Never change a formula.
  • Start with the biggest formula, and finish by checking every element.
Quick checkBalance: Al + O2 → Al2O3Show answer

Oxygen: 2 on the left, 3 on the right. The smallest number both divide into is 6, so write 3O2 and 2Al2O3. That gives 4 Al on the right, so write 4Al.

4Al + 3O2 → 2Al2O3

Try it yourselfBalance eight equations from this chapter with + and − buttons, then name the type of each reaction, in the Equation lab.

4Combination reactions

Combination reaction

A reaction in which two or more substances (elements or compounds) join to form a single product.
General form: A + B → AB

Quick lime and water

Water added to lumps of calcium oxide in a beaker. The mixture gets hot: the thermometer reading rises and heat is given out. Slaked lime, calcium hydroxide, is formed.HeatThermometer:reading risesWaterCalcium oxide(quick lime)
Figure 5. Water added to quick lime. The beaker gets hot.
  • Put a little calcium oxide (quick lime) in a beaker and slowly add water. Touch the beaker.
  • Seen: the mixture hisses and the beaker becomes very hot.
  • Calcium oxide and water combine to form slaked lime (calcium hydroxide), giving out a lot of heat.
CaO(s)quick lime+H2O(l)→Ca(OH)2(aq)slaked lime+Heat

Two reactants give one product, so this is a combination reaction. It gives out heat, so it is also exothermic (see topic 6).

Whitewashing walls

  • A solution of slaked lime is painted on walls.
  • It reacts slowly with carbon dioxide in the air. In two to three days, a thin layer of calcium carbonate forms. This gives the wall a shiny finish.
  • Marble has the same formula, CaCO3.
Ca(OH)2(aq)calcium hydroxide+CO2(g)→CaCO3(s)calcium carbonate+H2O(l)

More combination reactions

ReactionEquationWhat joins
Burning of coalC(s) + O2(g) → CO2(g)Element + element
Forming water2H2(g) + O2(g) → 2H2O(l)Element + element
Burning magnesium2Mg(s) + O2(g) → 2MgO(s)Element + element
Hydrogen and chlorineH2(g) + Cl2(g) → 2HCl(g)Element + element
Burning carbon monoxide2CO(g) + O2(g) → 2CO2(g)Compound + element
Quick lime and waterCaO(s) + H2O(l) → Ca(OH)2(aq)Compound + compound

Most combination reactions give out heat, so most are exothermic.

Remember

  • Combination: many reactants, one product.
  • Quick lime (CaO) + water → slaked lime (Ca(OH)2) + a lot of heat.
  • Whitewash: slaked lime reacts with carbon dioxide to form a shiny layer of CaCO3.
Quick checkIn the burning of magnesium, heat is given out and a single product forms. Name the two types this reaction belongs to.Show answer

It is a combination reaction (magnesium and oxygen form only magnesium oxide) and an exothermic reaction (heat and light are given out).

5Decomposition reactions

Decomposition reaction

A reaction in which a single reactant breaks down into two or more simpler products.
General form: AB → A + B

Decomposition is the opposite of combination. Breaking a compound needs energy, so most decomposition reactions take in energy as heat, light or electricity.

TypeEnergy usedExample
Thermal decompositionHeatLimestone → quick lime + carbon dioxide
Electrolytic decomposition (electrolysis)ElectricityWater → hydrogen + oxygen
Photolytic decomposition (photolysis)LightSilver chloride → silver + chlorine

1. Thermal decomposition (by heat)

Ferrous sulphate crystals (Figure 6a). The green crystals, FeSO4·7H2O, first lose their water of crystallisation on heating:

FeSO4·7H2O(s)Heat gives FeSO4(s)+7H2O(g)

On stronger heating, ferrous sulphate breaks down. The solid turns reddish brown (ferric oxide), and there is a smell of burning sulphur:

2FeSO4(s)ferrous sulphateHeat gives Fe2O3(s)ferric oxide+SO2(g)sulphur dioxide+SO3(g)sulphur trioxide
Ferrous sulphate crystals heated in a dry boiling tube held at a slant over a burner, its mouth pointing away. The green crystals turn reddish brown and gases with the smell of burning sulphur come out.Gases smelling ofburning sulphurGreen crystalsturn reddishbrownBurnerHolder(a) Ferrous sulphate crystals
Lead nitrate heated in a boiling tube held at a slant over a burner. Brown fumes of nitrogen dioxide come out of the tube.Brown fumes ofnitrogen dioxideLead nitrate(white)BurnerHolder(b) Lead nitrate
Figure 6. Heating a solid in a boiling tube. Point the mouth of the tube away from everyone, and smell a gas only by gently wafting it towards your nose.

Lead nitrate (Figure 6b). On heating, it gives off brown fumes of nitrogen dioxide, and leaves lead oxide:

2Pb(NO3)2(s)lead nitrateHeat gives 2PbO(s)lead oxide+4NO2(g)nitrogen dioxide+O2(g)oxygen

Calcium carbonate (limestone). Heating it gives calcium oxide (lime or quick lime), which is used to make cement:

CaCO3(s)limestoneHeat gives CaO(s)quick lime+CO2(g)

2. Electrolytic decomposition (by electricity)

Electrolysis of water. Two carbon electrodes pass through rubber stoppers in the base of a container of water with a little dilute sulphuric acid. A test tube full of water is turned upside down over each electrode, and the electrodes are joined to a 6 volt battery through a switch. Oxygen collects over the anode, the positive electrode, and twice the volume of hydrogen collects over the cathode, the negative electrode.6 VSwitchAnode (+)Cathode (−)OxygenHydrogen:double volumeTest tubeWater with alittle dilutesulphuric acidCarbonelectrode
Figure 7. Electrolysis of water. Hydrogen collects at the negative electrode, oxygen at the positive one.
  1. Fit two carbon electrodes through rubber stoppers in the base of a plastic container. Join them to a 6 V battery through a switch.
  2. Fill the container with water and add a few drops of dilute sulphuric acid. Pure water conducts electricity very poorly; the acid helps it conduct.
  3. Place a test tube full of water upside down over each electrode, and switch on.
  • Seen: bubbles at both electrodes push the water out of the test tubes.
  • The gas at the cathode (− electrode) is hydrogen. A burning candle brought near it makes a pop sound.
  • The gas at the anode (+ electrode) is oxygen. It makes the candle burn more brightly.
  • The volume of hydrogen is twice the volume of oxygen, because water has 2 hydrogen atoms for every oxygen atom.
2H2O(l)Electricity gives 2H2(g)+O2(g)

3. Photolytic decomposition (by light)

Silver chloride in a china dish. At the start it is white. After some time in sunlight it turns grey, because light splits it into silver and chlorine.At the start: whiteAfter some time: greysunlightSilver chlorideSilver forms
Figure 8. White silver chloride turns grey in sunlight as silver forms.
2AgCl(s)Sunlight gives 2Ag(s)+Cl2(g)
2AgBrSunlight gives 2Ag+Br2

Silver bromide behaves in the same way.

  • These reactions are used in black-and-white photography.
  • Silver salts are kept in dark-coloured bottles so that light cannot reach them.

Remember

  • Decomposition: one reactant, two or more products. It is the opposite of combination.
  • Energy is needed: heat (thermal), electricity (electrolysis) or light (photolysis).
  • Electrolysis of water: hydrogen at the cathode, oxygen at the anode, in the volume ratio 2 : 1.
Quick checkA white solid X, used in making cement, is formed by heating limestone. Name X and write the equation.Show answer

X is calcium oxide (quick lime), CaO.

CaCO3(s) Heat gives CaO(s) + CO2(g)

6Exothermic and endothermic reactions

Every reaction involves an energy change. Old bonds between atoms break and new bonds form. Breaking bonds takes in energy; making bonds gives out energy.

Exothermic and endothermic

An exothermic reaction gives out heat along with the products, so the surroundings get warmer.
An endothermic reaction takes in energy (heat, light or electricity), so the surroundings usually get colder.

Two reactions in beakers with thermometers. In an exothermic reaction heat is given out, so the mixture gets warmer and the thermometer reading rises. In an endothermic reaction heat is taken in, so the mixture gets colder and the reading falls.Exothermicheat given out, gets warmerReading risesEndothermicheat taken in, gets colderReading falls
Figure 9. A thermometer shows whether heat is given out or taken in.
ExothermicEndothermic
EnergyGiven outTaken in
Mixture or containerGets warmerGets colder, or needs heating
In the equationReactants → Products + heatReactants + energy → Products
ExamplesBurning, respiration, quick lime + waterMost decompositions, photosynthesis

Exothermic reactions

  • Quick lime and water: CaO(s) + H2O(l) → Ca(OH)2(aq) + Heat
  • Burning of natural gas (methane): CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
  • Burning of magnesium, coal and other fuels.
  • Rotting of vegetable matter into compost: a compost heap feels warm inside.
  • Respiration (below).

Why is respiration exothermic?

  1. Rice, bread and potatoes contain carbohydrates. Digestion breaks them down into glucose.
  2. In our cells, glucose combines with oxygen.
  3. This reaction releases energy, which keeps us alive and warm.
C6H12O6(aq)glucose+6O2(aq)→6CO2(aq)+6H2O(l)+energy

Endothermic reactions

  • Decomposition by heat, light or electricity, such as CaCO3(s) Heat gives CaO(s) + CO2(g)
  • Photosynthesis: plants take in light energy to make glucose.
  • Barium hydroxide and ammonium chloride: mix about 2 g of barium hydroxide with 1 g of ammonium chloride in a test tube. The bottom of the tube feels cold.
Ba(OH)2+2NH4Cl→BaCl2+2NH3+2H2O

Group activity: what you should find

Measure the temperature of four liquids, add a solid to each, stir, and measure again.

BeakerAddedTemperatureResult
A: waterPotassium sulphateFalls slightlyEndothermic (dissolving takes in a little heat)
B: waterAmmonium nitrateFalls clearlyEndothermic
C: waterAnhydrous copper sulphate (white)Rises; the solid turns blueExothermic
D: copper sulphate solutionFine iron filingsRises; blue colour fadesExothermic (displacement)

Remember

  • Exo = out: heat goes out, things get warm. Endo = in: energy goes in, things get cold.
  • Respiration and burning are exothermic. Photosynthesis and most decompositions are endothermic.
Quick checkA student touches a test tube in which a reaction is happening, and it feels cold. Is the reaction exothermic or endothermic? Explain.Show answer

Endothermic. The reaction takes heat from its surroundings, including the test tube and the student’s hand, so it feels cold.

7Displacement reactions

Displacement reaction

A reaction in which a more reactive element pushes out (displaces) a less reactive element from its compound.
General form: A + BC → AC + B, when A is more reactive than B.

Iron nails in copper sulphate solution

Two cleaned iron nails tied with a thread hang in copper sulphate solution in a test tube held by a clamp on a stand.ThreadTest tubeCoppersulphatesolutionIron nailsStand
Figure 10. Two clean iron nails hang in copper sulphate solution for about 20 minutes.
  1. Clean three iron nails with sandpaper.
  2. Put about 10 mL of copper sulphate solution in each of two test tubes, A and B.
  3. Tie two nails with a thread and hang them in tube B for about 20 minutes. Keep the third nail aside.
  4. Take out the nails and compare the tubes and the nails.
Copper sulphate solution after 20 minutes. Tube A, with no nail, stays blue. In tube B, where iron nails were dipped, the solution has turned pale green. The nail from tube B has a brown coating of copper; the nail kept aside is still grey.ABBluePale greenKept asideFrom tube BGreyBrown coatIron nailsCopper sulphate solution
Figure 11. After 20 minutes. The solution in B is pale green, and the nails from B are coated with brown copper.
  • Nail: gets a brownish coating. This is copper.
  • Solution: the blue colour fades to pale green. This is iron sulphate (ferrous sulphate).
  • Why: iron is more reactive than copper, so it takes the place of copper in the compound.
Fe(s)+CuSO4(aq)copper sulphate (blue)→FeSO4(aq)iron sulphate (pale green)+Cu(s)

The reactivity series

The reactivity series of metals, from most reactive to least: potassium, sodium, calcium, magnesium, aluminium, zinc, iron, lead, (hydrogen), copper, mercury, silver, gold.KNaCaMgAlZnFePb(H)CuHgAgAuReactivity decreasesMost reactiveLeast reactive
Figure 12. Metals in order of reactivity. Hydrogen is shown for comparison.

A metal can displace any metal below it in the series from a solution of its compound. It cannot displace a metal above it.

ReactionWhat you see
Zn(s) + CuSO4(aq) → ZnSO4(aq) + Cu(s)Blue colour fades; brown copper forms on the zinc.
Pb(s) + CuCl2(aq) → PbCl2(aq) + Cu(s)Lead is more reactive than copper, so copper is pushed out.
Cu(s) + 2AgNO3(aq) → Cu(NO3)2(aq) + 2Ag(s)Solution turns blue; shiny silver forms. Used to recover silver.
Zn(s) + H2SO4(aq) → ZnSO4(aq) + H2(g)Zinc displaces hydrogen from the acid: bubbles of gas.
Fe2O3(s) + 2Al(s) → Al2O3(s) + 2Fe(l)Aluminium displaces iron with so much heat that the iron melts. Used to join railway tracks (the thermite reaction).

No reaction: copper in iron sulphate solution, or silver in copper sulphate solution. Copper is less reactive than iron, and silver is less reactive than copper.

Remember

  • A more reactive metal displaces a less reactive metal from its salt solution.
  • Iron in copper sulphate: brown copper on the nail, blue solution turns pale green.
  • Order to learn: K, Na, Ca, Mg, Al, Zn, Fe, Pb, (H), Cu, Hg, Ag, Au.
Quick checkWill zinc react with iron sulphate solution? Will copper? Give reasons.Show answer

Zinc will: it is more reactive than iron, so it displaces iron. Zn + FeSO4 → ZnSO4 + Fe

Copper will not, because it is less reactive than iron.

8Double displacement reactions

Double displacement reaction

A reaction in which two compounds exchange their ions (charged parts) to form two new compounds.
General form: AB + CD → AD + CB

Double displacement: A B plus C D gives A D plus C B. The two compounds exchange their parts, called ions.AB+CDAD+CBB and D swapAB + CD → AD + CB
Figure 13. In a double displacement reaction, the two compounds swap partners.

Sodium sulphate and barium chloride

  • Mix about 3 mL of sodium sulphate solution with about 3 mL of barium chloride solution.
  • Seen: a white solid forms at once. It is barium sulphate, which does not dissolve in water.
Sodium sulphate solution poured into barium chloride solution in a test tube. A white precipitate of barium sulphate forms and settles at the bottom.Sodium sulphatesolutionBarium chloridesolutionWhite precipitateof barium sulphate
Figure 14. A white precipitate of barium sulphate forms.
Na2SO4(aq)sodium sulphate+BaCl2(aq)barium chloride→BaSO4(s)barium sulphate (white)+2NaCl(aq)sodium chloride

The Ba2+ ions and the SO42− ions join to form insoluble barium sulphate. The sodium chloride stays dissolved in the solution.

Precipitate

A precipitate is an insoluble solid that forms in a solution during a reaction. A reaction that gives a precipitate is a precipitation reaction.

Lead nitrate and potassium iodide

This is experiment 2 from topic 1. The yellow precipitate is lead iodide. The ions are exchanged, so it is also a double displacement reaction.

Pb(NO3)2(aq)lead(II) nitrate+2KI(aq)→PbI2(s)lead iodide (yellow)+2KNO3(aq)

More examples

ReactionPrecipitate
AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq)Silver chloride, white
CuSO4(aq) + 2NaOH(aq) → Cu(OH)2(s) + Na2SO4(aq)Copper hydroxide, blue
BaCl2(aq) + H2SO4(aq) → BaSO4(s) + 2HCl(aq)Barium sulphate, white
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)None: an acid and a base swap ions to form salt and water (neutralisation)

Displacement or double displacement?

DisplacementDouble displacement
What reactsAn element and a compoundTwo compounds
What happensA more reactive element takes the place of a less reactive oneTwo compounds exchange ions
General formA + BC → AC + BAB + CD → AD + CB
ExampleFe + CuSO4 → FeSO4 + CuNa2SO4 + BaCl2 → BaSO4 + 2NaCl

Remember

  • Double displacement: two compounds swap ions.
  • Precipitation reactions make an insoluble salt: barium sulphate (white), lead iodide (yellow), silver chloride (white).
  • Most double displacement reactions happen between solutions (aq).
Quick checkSilver nitrate solution is added to sodium chloride solution. What do you see? Name the type of reaction.Show answer

A white precipitate of silver chloride forms. It is a double displacement (precipitation) reaction.

AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq)

9Oxidation and reduction (redox)

Heating copper in air

Copper powder heated in a china dish on a wire gauze over a burner. The surface of the brown powder turns black as copper(II) oxide forms.Copper powder:its surfaceturns blackChina dishWire gauzeTripod standBurner
Figure 15. Heating copper powder in air. A black coating of copper(II) oxide forms.
  • Heat about 1 g of copper powder in a china dish.
  • Seen: the surface of the brown powder turns black. Copper has gained oxygen to form copper(II) oxide.
2Cubrown+O2Heat gives 2CuOblack

Pass hydrogen gas over the hot black solid and it turns brown again. The oxygen is removed and copper forms:

CuO+H2Heat gives Cu+H2O

Oxidation and reduction

Oxidation is the gain of oxygen or the loss of hydrogen by a substance.
Reduction is the loss of oxygen or the gain of hydrogen by a substance.

Copper(II) oxide plus hydrogen, on heating, gives copper plus water. Hydrogen gains oxygen and is oxidised to water. Copper(II) oxide loses oxygen and is reduced to copper. Both happen together: a redox reaction.CuO+H2heatCu+H2OOxidation: H2 gains oxygenReduction: CuO loses oxygen
Figure 16. In the same reaction, hydrogen is oxidised and copper(II) oxide is reduced.

Redox reaction

A reaction in which one reactant is oxidised while another is reduced. Oxidation and reduction always happen together.

Examples of redox reactions

ReactionOxidisedReduced
CuO + H2 Heat gives Cu + H2OH2 (gains oxygen)CuO (loses oxygen)
ZnO + C → Zn + COC (gains oxygen)ZnO (loses oxygen)
MnO2 + 4HCl → MnCl2 + 2H2O + Cl2HCl (loses hydrogen, forms Cl2)MnO2 (loses oxygen)
H2S + Cl2 → 2HCl + SH2S (loses hydrogen)Cl2 (gains hydrogen)
2Mg + O2 → 2MgOMg (gains oxygen)O2

Oxidising and reducing agents

  • An oxidising agent gives oxygen or removes hydrogen. It is itself reduced. In CuO + H2, CuO is the oxidising agent.
  • A reducing agent removes oxygen or gives hydrogen. It is itself oxidised. In CuO + H2, H2 is the reducing agent.

In higher classes, oxidation is also explained as the loss of electrons, and reduction as the gain of electrons.

Remember

  • OIL RIG is a memory aid for later: Oxidation Is Loss, Reduction Is Gain (of electrons).
  • For now: oxidation = gain of O or loss of H; reduction = loss of O or gain of H.
  • Name the reactant that is oxidised or reduced, not the product. In 2PbO + C → 2Pb + CO2, lead oxide is reduced and carbon is oxidised.
Quick checkWhen magnesium burns in air, is magnesium oxidised or reduced?Show answer

Oxidised. Magnesium gains oxygen to form magnesium oxide. Oxygen is the substance that is reduced.

10Corrosion and rancidity

Oxidation goes on around us all the time. Two everyday effects are corrosion and rancidity.

Corrosion

Corrosion

The slow eating away of a metal when it is attacked by substances around it, such as moisture, air (oxygen) and acids.

MetalCoating formedColour
IronRust: hydrated iron(III) oxide, Fe2O3·xH2OReddish brown
SilverSilver sulphide (from sulphur compounds in air)Black
CopperBasic copper carbonate (from carbon dioxide and moisture)Green

Rusting is the corrosion of iron. It needs both air (oxygen) and water (Figure 17).

Three test tubes with iron nails. A: the nail is in some water with air above it, and it rusts. B: the nail is in boiled water with a layer of oil on top to keep air out, and it does not rust. C: the nail is in dry air, kept dry by anhydrous calcium chloride, and it does not rust.AAir and waterRustsBWater, no airNo rustCDry airNo rustOil layer
Figure 17. Iron rusts only when both air and water are present.
4Fe(s)+3O2(g)+2xH2O(l)→2Fe2O3·xH2O(s)rust

Corrosion damages car bodies, bridges, iron railings, ships and anything made of iron. Replacing rusted iron costs a great deal of money every year.

Preventing rusting: keep air and water away from the iron.

  • Paint it, or coat it with oil or grease.
  • Galvanise it: coat it with a thin layer of zinc.
  • Plate it with chromium or tin.
  • Make an alloy such as stainless steel.

Rancidity

Rancidity

When fats and oils in food are oxidised, they become rancid: their smell and taste change and the food is spoiled.

Ways to slow down rancidity:

  • Add antioxidants: substances that stop oxidation. Vitamins C and E are natural antioxidants.
  • Store food in airtight containers, so less oxygen reaches it.
  • Flush packets with nitrogen: packets of chips are filled with nitrogen, an unreactive gas, which pushes out the oxygen.
  • Keep food in a refrigerator: oxidation is slower when it is cold.
  • Keep food away from light, which speeds up oxidation.
CorrosionRancidity
Happens toMetalsFats and oils in food
Caused byAir, moisture, acidsOxidation by oxygen in air
ExampleRusting of ironOld chips or butter smelling bad
PreventionPaint, oil, galvanising, alloysAntioxidants, airtight packs, nitrogen, cold

Remember

  • Rusting needs both air and water.
  • Paint stops rust by keeping air and moisture away from the iron.
  • Nitrogen in chip packets keeps oxygen out and stops rancidity.
Quick checkWhy does an iron nail left in a wet sink overnight rust faster than one kept in a dry drawer?Show answer

In the sink, the nail has both water and air around it, which are needed for rusting. In a dry drawer there is little moisture, so rusting is very slow.

Test yourselfTake the 25-question practice quiz on this chapter. Revising for the board exam?Get the Chapter 1 revision PDF: quick notes, 20 new board-pattern questions and full answers, for ₹49.