Chapter 3 · Chemistry

Metals and Non-metals

How metals and non-metals differ, how metals react with oxygen, water, acids and salt solutions, the reactivity series, how ionic compounds form, how metals are extracted and refined, and how corrosion is prevented and alloys are made.

Questions on the patterns that come up most often in school tests and the board exam, in the same formats as the board paper. Each question shows the skill it tests. Try each one before you open the answer.

What the board asks most

How this chapter is tested

  • Chemistry (Chapters 1 to 4, Chemical Substances: Nature and Behaviour) carries 25 of the 80 marks in the theory paper.
  • This chapter is one of the most often tested in chemistry. The reactivity series, displacement reactions, the electron-dot formation of ionic compounds and the steps of extracting metals come up again and again.
  • It is tested through multiple-choice and assertion–reason questions on the reactivity series, oxides and alloys, through 2 and 3-mark questions that ask for balanced equations and reasons, and through case-based questions on extraction, refining and corrosion.
  • Marks are lost for wrong electron arrangements and missing charges on ions, for mixing up roasting and calcination, for swapping the anode and the cathode in electrolytic refining, and for unbalanced equations.

Asked most often, with questions to practise

  1. Reactivity series and displacement reactionsQ3Q6Q9Q12Q19Q28Q35
  2. Reactions of metals with oxygen, water and acidsQ2Q11Q12Q16Q22Q32
  3. Amphoteric oxides; metals and non-metals comparedQ1Q10Q22Q36
  4. Electron-dot formation of ionic compoundsQ4Q18Q26Q33
  5. Properties of ionic compoundsQ7Q13Q26Q33
  6. Roasting, calcination, reduction and electrolytic reductionQ5Q17Q23Q24Q29Q34
  7. Electrolytic refiningQ30Q34
  8. Corrosion and its preventionQ14Q20Q21Q25Q31
  9. AlloysQ8Q15Q27

1 mark each

Multiple choice questions

  1. Q1
    ApplicationThe oxide of an element X has the formula X2O3. It reacts both with dilute hydrochloric acid and with sodium hydroxide solution to give a salt and water. X is most likely(a) sodium(b) aluminium(c) sulphur(d) copper
    Show answer

    (b) aluminium

    Al2O3 is amphoteric: it reacts with both acids and bases. Sodium oxide is Na2O and basic; sulphur forms acidic oxides; copper oxide is basic.

  2. Q2
    UnderstandingWhich metal does not react with cold water but reacts with hot water?(a) Sodium(b) Calcium(c) Magnesium(d) Iron
    Show answer

    (c) Magnesium

    Mg(s) + 2H2O(l) → Mg(OH)2(aq) + H2(g). Sodium and calcium react with cold water; iron reacts only with steam.

  3. Q3
    Analytical thinkingA metal X displaces copper from copper sulphate solution but does not displace iron from iron(II) sulphate solution. X could be(a) lead(b) zinc(c) silver(d) magnesium
    Show answer

    (a) lead

    X lies between iron and copper in the reactivity series. Lead is the only one of these there. Zinc and magnesium would displace iron too; silver displaces neither.

  4. Q4
    UnderstandingThe electron arrangement of the chloride ion, Cl−, is(a) 2, 8, 7(b) 2, 8, 1(c) 2, 8(d) 2, 8, 8
    Show answer

    (d) 2, 8, 8

    Chlorine (2, 8, 7) gains one electron to complete its octet.

  5. Q5
    ApplicationSodium metal is obtained by(a) heating sodium oxide with carbon(b) heating sodium chloride strongly(c) electrolysis of molten sodium chloride(d) electrolysis of brine
    Show answer

    (c) electrolysis of molten sodium chloride

    Carbon cannot reduce sodium oxide, because sodium has a greater affinity for oxygen. Electrolysis of brine (in water) gives sodium hydroxide, hydrogen and chlorine, not sodium.

  6. Q6
    Critical thinkingA copper wire is left in a colourless solution. After an hour the solution has turned blue and shiny crystals have formed on the wire. The solution was(a) zinc sulphate(b) silver nitrate(c) sodium chloride(d) magnesium sulphate
    Show answer

    (b) silver nitrate

    Copper displaces silver: Cu(s) + 2AgNO3(aq) → Cu(NO3)2(aq) + 2Ag(s). Copper nitrate solution is blue. Copper cannot displace zinc, sodium or magnesium.

  7. Q7
    UnderstandingWhich statement about ionic compounds is correct?(a) They conduct electricity in the solid state.(b) They dissolve in kerosene.(c) They have low melting points.(d) They conduct electricity when molten.
    Show answer

    (d) They conduct electricity when molten.

    Molten, the ions are free to move. In the solid they are fixed; ionic compounds dissolve in water, not kerosene, and have high melting points.

  8. Q8
    ApplicationOrnaments of 22-carat gold contain(a) 22 parts gold and 2 parts copper or silver(b) 22 parts gold and 24 parts copper(c) 24 parts gold and 2 parts silver(d) pure gold only
    Show answer

    (a) 22 parts gold and 2 parts copper or silver

    Pure gold is 24-carat and too soft for jewellery, so it is alloyed with copper or silver.

1 mark each

Assertion–reason questions

Each question has two statements: an Assertion (A) and a Reason (R). Choose the correct option:

  1. (a)Both A and R are true, and R is the correct explanation of A.
  2. (b)Both A and R are true, but R is not the correct explanation of A.
  3. (c)A is true, but R is false.
  4. (d)A is false, but R is true.
  1. Q9
    UnderstandingAssertion (A): Zinc displaces copper from copper sulphate solution.Reason (R): Zinc is more reactive than copper.
    Show answer

    (a) Both A and R are true, and R is the correct explanation of A.

    A more reactive metal displaces a less reactive one: Zn + CuSO4 → ZnSO4 + Cu.

  2. Q10
    Analytical thinkingAssertion (A): Aluminium does not corrode easily in air.Reason (R): Aluminium is less reactive than iron.
    Show answer

    (c) A is true, but R is false.

    A is true: a thin protective oxide layer stops further corrosion. R is false: aluminium is more reactive than iron.

  3. Q11
    UnderstandingAssertion (A): Sodium is stored under kerosene.Reason (R): Sodium is soft enough to be cut with a knife.
    Show answer

    (b) Both A and R are true, but R is not the correct explanation of A.

    Both are true, but sodium is kept under kerosene because it reacts vigorously with air and moisture, not because it is soft.

  4. Q12
    Critical thinkingAssertion (A): Copper displaces hydrogen from dilute hydrochloric acid.Reason (R): Copper is below hydrogen in the reactivity series.
    Show answer

    (d) A is false, but R is true.

    Because copper is below hydrogen, it cannot displace hydrogen, so A is false.

  5. Q13
    UnderstandingAssertion (A): Ionic compounds conduct electricity in the molten state.Reason (R): In the molten state, the ions are free to move.
    Show answer

    (a) Both A and R are true, and R is the correct explanation of A.

    Moving ions carry the current; the heat overcomes the attraction that holds them in place.

  6. Q14
    Analytical thinkingAssertion (A): Galvanised iron does not rust even if the zinc coating is scratched.Reason (R): Zinc is less reactive than iron.
    Show answer

    (c) A is true, but R is false.

    A is true. R is false: zinc is more reactive than iron, so it reacts first and protects the iron.

  7. Q15
    UnderstandingAssertion (A): Solder is used to join electric wires.Reason (R): Solder is an alloy of lead and tin.
    Show answer

    (b) Both A and R are true, but R is not the correct explanation of A.

    Both are true, but solder is used because of its low melting point; its composition alone does not explain the use.

2 marks each

Very short answer questions

  1. Q16
    ApplicationWrite balanced chemical equations, with state symbols, for the reactions of(a) potassium with water;(b) aluminium with steam.
    Show answer

    (a) 2K(s) + 2H2O(l) → 2KOH(aq) + H2(g) + Heat

    (b) 2Al(s) + 3H2O(g) → Al2O3(s) + 3H2(g)

  2. Q17
    UnderstandingDistinguish between roasting and calcination. Give one equation for each.
    Show answer
    RoastingCalcination
    OreSulphide oreCarbonate ore
    ConditionHeated strongly in excess airHeated strongly in limited air
    Example2ZnS(s) + 3O2(g) Heat gives 2ZnO(s) + 2SO2(g)ZnCO3(s) Heat gives ZnO(s) + CO2(g)
  3. Q18
    Analytical thinkingShow the formation of calcium chloride from calcium (atomic number 20) and chlorine (atomic number 17) by the transfer of electrons. Name the ions formed.
    Show answer

    Calcium: 2, 8, 8, 2. Chlorine: 2, 8, 7. One calcium atom gives one electron to each of two chlorine atoms.

    Ca2, 8, 8, 2→Ca2+2, 8, 8+2e−
    Cl2, 8, 7 (two atoms)+e−→Cl−2, 8, 8

    Ions: calcium ion, Ca2+, and chloride ions, Cl−. Formula: CaCl2.

  4. Q19
    Critical thinkingA strip of copper is put in zinc sulphate solution, and a strip of zinc in copper sulphate solution. In which beaker will you see a change? Explain with an equation.
    Show answer

    In the beaker with zinc in copper sulphate. Zinc is more reactive than copper, so it displaces copper: the blue colour fades and reddish-brown copper forms on the zinc.

    Zn(s)+CuSO4(aq)→ZnSO4(aq)+Cu(s)

    Copper is less reactive than zinc, so nothing happens in the other beaker.

  5. Q20
    UnderstandingWhat is anodising? State one advantage of it.
    Show answer

    Anodising is making the protective oxide layer on aluminium thicker. The aluminium article is made the anode and electrolysed with dilute sulphuric acid; the oxygen given off at the anode thickens the oxide layer.

    Advantage: the article resists corrosion better (and the layer can be dyed for an attractive finish).

  6. Q21
    ApplicationSilver articles turn black and copper vessels turn green when left in the air. Name the substance formed in each case.
    Show answer

    Silver: black silver sulphide, Ag2S, formed with sulphur compounds in the air.

    Copper: green basic copper carbonate, CuCO3·Cu(OH)2, formed with moist carbon dioxide in the air.

3 marks each

Short answer questions

  1. Q22
    Analytical thinkingA silvery metal X burns in air with a dazzling white flame and forms a white powder Y. Y dissolves slightly in water, and the solution turns red litmus blue. Identify X and Y, write the equations, and state the nature of Y.
    Show answer

    X = magnesium; Y = magnesium oxide, MgO.

    2Mg(s)+O2(g)→2MgO(s)
    MgO(s)+H2O(l)→Mg(OH)2(aq)turns red litmus blue

    Y is a basic oxide, like most metal oxides.

  2. Q23
    UnderstandingWhy can sodium not be obtained by heating its oxide with carbon? How is it obtained? Write the reactions at the two electrodes.
    Show answer

    Sodium is very high in the reactivity series: it has a greater affinity for oxygen than carbon has, so carbon cannot take the oxygen from sodium oxide.

    Sodium is obtained by electrolysis of molten sodium chloride:

    Na+at the cathode (−)+e−→Na
    2Cl−at the anode (+)→Cl2+2e−
  3. Q24
    ApplicationWhat is the thermit reaction? Write its equation, name the substance oxidised and the substance reduced, and give one use.
    Show answer

    The reaction of iron(III) oxide with aluminium powder. So much heat is given out that the iron formed is molten.

    Fe2O3(s)+2Al(s)→2Fe(l)+Al2O3(s)+Heat

    Aluminium is oxidised (it gains oxygen); iron(III) oxide is reduced (it loses oxygen).

    Use: joining railway tracks, or repairing cracked machine parts.

  4. Q25
    Critical thinkingIron nails are kept in three corked test tubes: A with ordinary water, B with boiled distilled water covered with oil, C with anhydrous calcium chloride. In which tube do the nails rust? What does this show? Why is the water in B boiled and covered with oil?
    Show answer

    The nails rust only in tube A.

    Three corked test tubes with iron nails. Tube A has water and air: the nails rust. Tube B has boiled distilled water covered with a layer of oil, so there is no air: no rust. Tube C has anhydrous calcium chloride, which takes up moisture, so the air is dry: no rust.ABCAir and waterNails rustWater, no airNo rustDry airNo rustOil layerBoileddistilledwaterAnhydrouscalciumchloride(takes upmoisture)
    Only the nails exposed to both air and water rust.

    This shows that iron needs both air (oxygen) and water to rust. In B there is water but no air; in C there is air but it is dry (calcium chloride takes up the moisture).

    Boiling removes the air dissolved in the water, and the oil layer stops air dissolving in it again.

  5. Q26
    Analytical thinkingElements A, B and C have atomic numbers 11, 17 and 8. Write their electron arrangements. What is the formula of the compound formed between A and B, and what type of bond does it have? Give two properties of this compound.
    Show answer

    A (sodium): 2, 8, 1. B (chlorine): 2, 8, 7. C (oxygen): 2, 6.

    A gives one electron to B, forming A+ and B−: the compound is AB (NaCl), held by an ionic (electrovalent) bond.

    Properties: (1) high melting and boiling points; (2) soluble in water and conducts electricity in solution or when molten (also: hard, brittle solid; insoluble in kerosene).

  6. Q27
    ApplicationWhy is iron rarely used in its pure form? Name the components of stainless steel, brass and bronze. Why is copper, not brass, used for electric wiring?
    Show answer

    Pure iron is very soft and stretches easily when hot. With a little carbon (about 0.05%) it becomes hard and strong.

    AlloyComponents
    Stainless steelIron, nickel and chromium
    BrassCopper and zinc
    BronzeCopper and tin

    An alloy conducts electricity less well than the pure metal, so pure copper is used for wiring.

4 marks each

Case-based questions

  1. Q28
    Analytical thinkingRead the case and answer the questions.

    A student put pieces of four metals, P, Q, R and S, into three salt solutions and recorded whether a displacement reaction took place.

    MetalCopper sulphateZinc sulphateSilver nitrate
    PDisplacementNo reactionDisplacement
    QDisplacementDisplacementDisplacement
    RNo reactionNo reactionDisplacement
    SNo reactionNo reactionNo reaction
    1. (i)Which metal is the most reactive?1 mark
    2. (ii)Which of the four metals could be gold? Why?1 mark
    3. (iii)Arrange P, Q, R and S in order of decreasing reactivity. Will R displace P from a solution of a salt of P?2 marks
    4. OR
    5. (iii)If P is iron, what would the student see in the copper sulphate solution? Write the equation.2 marks
    Show answer

    (i) Q: it displaces all three metals, even zinc.

    (ii) S: it displaces nothing, not even silver, so it is the least reactive, like gold.

    (iii) Q > P > R > S. R is less reactive than P, so it will not displace P.

    OR

    The blue colour fades to pale green and a reddish-brown coat of copper forms on the iron:

    Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s)
  2. Q29
    ApplicationRead the case and answer the questions.

    Zinc is extracted from two ores, zinc blende (zinc sulphide) and calamine (zinc carbonate). After the gangue is removed, zinc blende is heated strongly in excess air, and calamine is heated strongly in limited air. Both give zinc oxide, which is then heated with coke to give zinc.

    1. (i)Name the process used for zinc blende and the process used for calamine.1 mark
    2. (ii)Name the gas given off in each process.1 mark
    3. (iii)Write balanced equations for the two processes.2 marks
    4. OR
    5. (iii)Write the equation for the reaction of zinc oxide with coke. Which substance is oxidised and which is reduced?2 marks
    Show answer

    (i) Zinc blende: roasting. Calamine: calcination.

    (ii) Roasting gives sulphur dioxide; calcination gives carbon dioxide.

    (iii) 2ZnS(s) + 3O2(g) Heat gives 2ZnO(s) + 2SO2(g)
    ZnCO3(s) Heat gives ZnO(s) + CO2(g)

    OR

    ZnO(s) + C(s) → Zn(s) + CO(g)

    Carbon is oxidised; zinc oxide is reduced.

  3. Q30
    UnderstandingRead the case and answer the questions.

    In a copper refinery, thick slabs of impure copper and thin sheets of pure copper hang in tanks of acidified copper sulphate solution and are joined to a battery. After some days the thin sheets have grown thick, the slabs have become thin, and a sludge containing silver and gold has collected at the bottom of the tanks.

    1. (i)Which are joined to the positive terminal: the slabs or the sheets?1 mark
    2. (ii)What is the sludge called?1 mark
    3. (iii)Write the reactions at the anode and at the cathode.2 marks
    4. OR
    5. (iii)Why do soluble impurities such as iron not deposit on the cathode, while silver and gold collect at the bottom?2 marks
    Show answer

    (i) The impure copper slabs: they are the anode.

    (ii) Anode mud.

    (iii) Cu → Cu2+ + 2e− (anode); Cu2+ + 2e− → Cu (cathode).

    Electrolytic refining of copper. A tank holds acidified copper sulphate solution. The anode, joined to the positive terminal, is a block of impure copper; the cathode, joined to the negative terminal, is a thin strip of pure copper. Copper ions move from the anode side to the cathode, where pure copper is deposited. Insoluble impurities collect below the anode as anode mud.−+Cu2+Cu2+Cu2+Battery and keyCathode (−):thin strip ofpure copperPure copperis depositedhereAnode (+):impurecopperAcidifiedcoppersulphatesolutionAnode mud(insolubleimpurities)Tank
    Electrolytic refining of copper.

    OR

    Iron is more reactive than copper: it dissolves as ions and stays in the solution, and copper ions are deposited instead. Silver and gold are less reactive than copper: they do not dissolve at the anode, so they fall to the bottom as anode mud.

  4. Q31
    Critical thinkingRead the case and answer the questions.

    In a town, the iron railings of a park rust quickly, while galvanised iron roofs and stainless steel taps stay in good condition for years. Painted iron gates rust only where the paint has chipped off.

    1. (i)What two things must be present for iron to rust?1 mark
    2. (ii)What is rust, chemically?1 mark
    3. (iii)Why does painted iron rust where the paint is chipped, while galvanised iron does not rust even where it is scratched?2 marks
    4. OR
    5. (iii)Name the metals mixed with iron in stainless steel, and state why stainless steel is used for taps.2 marks
    Show answer

    (i) Air (oxygen) and water (moisture).

    (ii) Hydrated iron(III) oxide, Fe2O3·xH2O.

    (iii) Paint only keeps air and water out; where it is chipped the iron is exposed and rusts. In galvanised iron, zinc is more reactive than iron, so around a scratch the zinc reacts instead and the iron stays protected.

    A galvanised iron sheet in cross-section. A thin coat of zinc covers the iron. Where the coat is scratched and moisture reaches the iron, the more reactive zinc around the scratch reacts instead, so the iron still does not rust.Zinc corrodesinstead of ironMoisture(water and air)Zinc coatingIron or steelScratch: the iron is exposed but does not rust
    Zinc protects the iron even where the coat is scratched.

    OR

    Nickel and chromium. Stainless steel is hard and does not rust, even in constant contact with water.

5 marks each

Long answer questions

  1. Q32
    Understanding(a) Describe how potassium, calcium, magnesium and iron react with water. Write one equation for each.(b) Draw a labelled diagram of the apparatus used to study the action of steam on a metal.(c) Name two metals that do not react with water at all.
    Show answer

    (a) Potassium reacts violently with cold water; the hydrogen catches fire. Calcium reacts gently with cold water and floats. Magnesium reacts with hot water and floats. Iron reacts only with steam.

    2K(s)+2H2O(l)→2KOH(aq)+H2(g)+Heat
    Ca(s)+2H2O(l)→Ca(OH)2(aq)+H2(g)
    Mg(s)+2H2O(l)hot water→Mg(OH)2(aq)+H2(g)
    3Fe(s)+4H2O(g)steam→Fe3O4(s)+4H2(g)

    (b)

    A metal sample lies in a horizontal boiling tube held by a clamp on a stand, with glass wool soaked in water at the closed end. The tube is heated with a burner, so the metal reacts with steam. Hydrogen gas passes through a delivery tube into a trough of water and collects at the top of an upside-down test tube full of water.Glass woolsoaked in waterMetal sampleBurnerStandCorkDelivery tubeHydrogen gasWater
    The action of steam on a metal.

    (c) Copper and silver (also lead and gold).

  2. Q33
    Analytical thinking(a) Show, with electron-dot diagrams, the formation of sodium chloride and magnesium chloride.(b) State four properties of ionic compounds and give a reason for each.
    Show answer

    (a)

    Electron-dot formation of sodium chloride. Sodium, with one outer electron shown as a dot, gives it to chlorine, which has seven outer electrons shown as crosses. The products are the sodium ion, Na plus, and the chloride ion, Cl minus, with eight outer electrons in square brackets.Na+ClNa+Cl−2, 8, 12, 8, 72, 82, 8, 8sodium ionchloride ion
    Formation of sodium chloride: Na (2, 8, 1) gives one electron to Cl (2, 8, 7).
    Electron-dot formation of magnesium chloride. Magnesium, with two outer electrons shown as dots, gives one electron to each of two chlorine atoms, which have seven outer electrons each, shown as crosses. The products are one magnesium ion, Mg two plus, and two chloride ions, each Cl minus with eight outer electrons.MgClCl+Mg2+Cl−Cl−2, 8, 22, 8, 72, 8, 72, 82, 8, 8 each
    Formation of magnesium chloride: Mg (2, 8, 2) gives one electron to each of two chlorine atoms.

    (b)

    PropertyReason
    Hard, brittle solidsStrong attraction between oppositely charged ions
    High melting and boiling pointsMuch energy is needed to overcome the strong attraction between the ions
    Soluble in water, not in kerosene or petrolWater can separate the ions; kerosene and petrol cannot
    Conduct electricity when molten or in solution, not as solidsOnly then are the ions free to move
  3. Q34
    Application(a) Draw a flow chart of the steps used to extract a metal of medium reactivity from its ore.(b) Write the equations for the roasting of zinc sulphide and the reduction of zinc oxide.(c) With a labelled diagram, explain the electrolytic refining of copper.
    Show answer

    (a)

    Steps in extracting metals. The ore is first concentrated to remove the gangue. Metals of high reactivity are obtained by electrolysis of the molten compound. For metals of medium reactivity, carbonate ores are calcined and sulphide ores roasted to give the oxide, which is reduced to the metal and then refined. For metals of low reactivity, the sulphide ore is roasted to give the metal, which is then refined.OreConcentration of ore(removing the gangue)Metals of highreactivityMetals of mediumreactivityMetals of lowreactivityElectrolysis ofmolten compoundPure metalCarbonateoreSulphideoreCalcinationRoastingOxide of metalReduction to metalRefining of metalSulphide oreRoastingMetalRefining
    Steps in the extraction of metals (the middle column is for metals of medium reactivity).

    (b) 2ZnS(s) + 3O2(g) Heat gives 2ZnO(s) + 2SO2(g)
    ZnO(s) + C(s) → Zn(s) + CO(g)

    (c) Anode: impure copper. Cathode: a thin strip of pure copper. Electrolyte: acidified copper sulphate solution. On passing a current, copper dissolves from the anode and pure copper is deposited on the cathode. Soluble impurities stay in the solution; insoluble ones settle below the anode as anode mud.

    Electrolytic refining of copper. A tank holds acidified copper sulphate solution. The anode, joined to the positive terminal, is a block of impure copper; the cathode, joined to the negative terminal, is a thin strip of pure copper. Copper ions move from the anode side to the cathode, where pure copper is deposited. Insoluble impurities collect below the anode as anode mud.−+Cu2+Cu2+Cu2+Battery and keyCathode (−):thin strip ofpure copperPure copperis depositedhereAnode (+):impurecopperAcidifiedcoppersulphatesolutionAnode mud(insolubleimpurities)Tank
    Electrolytic refining of copper.
  4. Q35
    Critical thinking(a) What is the reactivity series? Write it for K, Na, Ca, Mg, Al, Zn, Fe, Pb, H, Cu, Ag and Au.(b) Predict, with reasons, whether a reaction takes place: (i) iron with copper sulphate solution; (ii) silver with dilute hydrochloric acid; (iii) copper with zinc sulphate solution. Write the equation where there is a reaction.(c) What is aqua regia, and why is it special?
    Show answer

    (a) A list of metals in order of decreasing reactivity: K > Na > Ca > Mg > Al > Zn > Fe > Pb > [H] > Cu > Ag > Au.

    (b) (i) Yes: iron is more reactive than copper. Fe(s) + CuSO4(aq) → FeSO4(aq) + Cu(s)

    (ii) No: silver is below hydrogen, so it cannot displace hydrogen from the acid.

    (iii) No: copper is less reactive than zinc.

    (c) Aqua regia is a freshly prepared mixture of concentrated hydrochloric acid and concentrated nitric acid in the ratio 3 : 1. It can dissolve gold and platinum, which neither acid can dissolve alone.

  5. Q36
    Understanding(a) Give four physical properties in which metals and non-metals differ, and one exception for each.(b) What are amphoteric oxides? Write equations to show that zinc oxide is amphoteric.(c) Why do non-metals not displace hydrogen from dilute acids?
    Show answer

    (a)

    PropertyMetalsNon-metalsException
    StateSolidsSolids or gasesMercury: liquid metal; bromine: liquid non-metal
    LustreLustrousDullIodine is a lustrous non-metal
    HardnessHardSoft (if solid)Sodium and potassium are soft metals; diamond is very hard
    ConductionGood conductorsPoor conductorsGraphite conducts electricity

    (b) Metal oxides that react with both acids and bases to give a salt and water.

    ZnOas a base+2HCl→ZnCl2+H2O
    ZnOas an acid+2NaOH→Na2ZnO2sodium zincate+H2O

    (c) To give hydrogen gas, an element must supply electrons to the H+ ions of the acid. Non-metals gain electrons; they do not give them away.

Revising for the board exam?Get the Chapter 3 revision PDF: quick notes, 20 new board-pattern questions and full answers, for ₹49.