Chapter 7 · Physics

Work, Energy, and Simple Machines

Work, energy and power, and how simple machines help us: work done by a constant force, positive, negative and zero work, the work-energy theorem, kinetic and potential energy, conservation of mechanical energy, power, and the pulley, inclined plane and lever with their mechanical advantage.

Questions on the ideas that come up most often in school tests and exams, in the same formats as CBSE papers. Each question shows the skill it tests. Try each one before you open the answer.

What school exams ask most

How this chapter is tested

  • Work, Energy, and Simple Machines is full of numericals: most papers ask for work, kinetic or potential energy, power, and the mechanical advantage of a lever or ramp.
  • The ideas asked most often are: work and when it is zero or negative; the work-energy theorem; kinetic energy and its derivation; potential energy, mgh; conservation of mechanical energy (falling body, pendulum, slides); power and its units; and the pulley, inclined plane and lever.
  • It is tested through multiple-choice and assertion–reason questions, 2 and 3-mark numericals, case-based questions on slides, stairs and levers, and long answers that ask for a derivation with a numerical.
  • Marks are lost for leaving grams or km h−1 unconverted, for missing the negative sign of work against motion, for forgetting to square the speed in 12mv2, and for thinking a machine reduces the work needed.

Asked most often, with questions to practise

  1. Work, positive and negativeQ1Q8Q9Q14Q15
  2. Kinetic energyQ2Q10Q16Q20Q21
  3. Potential energy and conservationQ3Q5Q12Q17Q22Q26Q29Q30
  4. PowerQ4Q23Q27
  5. Pulley and inclined planeQ11Q13Q18Q25
  6. LeversQ6Q7Q19Q24Q28Q31

1 mark each

Multiple choice questions

  1. Q1
    UnderstandingIn which case is work done on the object?(a) A porter standing still with a load on his head(b) A girl pushing a wall(c) A boy lifting a bucket from a well(d) A satellite moving at right angles to the pull on it
    Show answer

    (c) A boy lifting a bucket from a well

    The force and the displacement are both upwards. In (a) and (b) there is no displacement; in (d) the force is at right angles to the motion.

  2. Q2
    ApplicationThe kinetic energy of a 4 kg trolley is 50 J. Its speed is(a) 5 m s−1(b) 12.5 m s−1(c) 25 m s−1(d) 2.5 m s−1
    Show answer

    (a) 5 m s−1

    v=√(2Km)=√(100 J4 kg) = 5 m s−1
  3. Q3
    UnderstandingWhich form of energy does a compressed spring have?(a) kinetic(b) elastic potential(c) gravitational potential(d) sound
    Show answer

    (b) elastic potential

    The energy is stored in its changed shape.

  4. Q4
    ApplicationA 50 kg girl climbs 4 m up a rope in 10 s. Her power is (g = 10 m s−2)(a) 20 W(b) 200 W(c) 2000 W(d) 50 W
    Show answer

    (b) 200 W

    P=mght=50 × 10 × 4 J10 s=200 W
  5. Q5
    Analytical thinkingTwo balls of masses 1 kg and 2 kg are dropped together from the same height. Just before reaching the ground, they have(a) the same speed and the same kinetic energy(b) the same speed but different kinetic energies(c) different speeds but the same kinetic energy(d) different speeds and different kinetic energies
    Show answer

    (b) the same speed but different kinetic energies

    v = √(2gh) does not depend on mass, but K = 12mv2 does: the 2 kg ball has twice the kinetic energy.

  6. Q6
    UnderstandingThe mechanical advantage of a lever is greater than 1 when(a) the effort arm is longer than the load arm(b) the load arm is longer than the effort arm(c) both arms are equal(d) the fulcrum is at one end
    Show answer

    (a) the effort arm is longer than the load arm

    Mechanical advantage = effort armload arm.

  7. Q7
    UnderstandingTweezers are a lever of(a) Class I(b) Class II(c) Class III(d) none of these
    Show answer

    (c) Class III

    The effort (your fingers) is between the fulcrum (the joined end) and the load (the tips).

  8. Q8
    ApplicationA pump raises 200 kg of water through 15 m. The work done is (g = 10 m s−2)(a) 3000 J(b) 30 000 J(c) 300 J(d) 2150 J
    Show answer

    (b) 30 000 J

    W = mgh = 200 × 10 × 15 J = 30 000 J.

1 mark each

Assertion–reason questions

Each question has two statements: an Assertion (A) and a Reason (R). Choose the correct option:

  1. (a)Both A and R are true, and R is the correct explanation of A.
  2. (b)Both A and R are true, but R is not the correct explanation of A.
  3. (c)A is true, but R is false.
  4. (d)A is false, but R is true.
  1. Q9
    UnderstandingAssertion (A): No work is done when a person holds a heavy box still.Reason (R): Work is done only when the force causes a displacement in its direction.
    Show answer

    (a) Both A and R are true, and R is the correct explanation of A.

    With no displacement, W = 0.

  2. Q10
    ApplicationAssertion (A): When the speed of a car is doubled, its kinetic energy is doubled.Reason (R): Kinetic energy is proportional to the square of the speed.
    Show answer

    (d) A is false, but R is true.

    R is true, so the kinetic energy becomes four times, not twice: A is false.

  3. Q11
    UnderstandingAssertion (A): A simple machine can reduce the effort needed to lift a load.Reason (R): A simple machine reduces the total work needed.
    Show answer

    (c) A is true, but R is false.

    It reduces the force, but the effort then acts over a longer distance: the work is not reduced.

  4. Q12
    Analytical thinkingAssertion (A): The mechanical energy of a freely falling body stays constant.Reason (R): The loss in its potential energy equals the gain in its kinetic energy.
    Show answer

    (a) Both A and R are true, and R is the correct explanation of A.

    Ignoring air resistance, potential energy turns into kinetic energy with nothing lost.

  5. Q13
    UnderstandingAssertion (A): A fixed pulley makes lifting a load easier.Reason (R): A fixed pulley has a mechanical advantage greater than 1.
    Show answer

    (c) A is true, but R is false.

    It is easier because we can pull down (using our weight) instead of lifting up, but its mechanical advantage is 1.

2 marks each

Very short answer questions

  1. Q14
    UnderstandingDefine one joule of work.
    Show answer

    One joule is the work done when a force of 1 newton moves an object through 1 metre in the direction of the force: 1 J = 1 N m.

  2. Q15
    ApplicationA goalkeeper stops a ball by moving her hands back 25 cm while applying a force of 120 N. Find the work she does on the ball and state its sign.
    Show answer
    W=120 N × (−0.25 m)=−30 J

    Negative: her force is opposite to the ball’s displacement.

  3. Q16
    UnderstandingState two differences between kinetic and potential energy.
    Show answer
    Kinetic energyPotential energy
    Due toMotionPosition or shape (deformation)
    Formula12mv2mgh (gravitational)
    ExampleA moving carWater stored in a dam
  4. Q17
    ApplicationFind the potential energy of a 600 g flowerpot on a balcony 8 m above the ground. If it falls, what is its kinetic energy just before it hits the ground? (g = 10 m s−2)
    Show answer
    U=0.6 kg × 10 m s−2 × 8 m=48 J

    Ignoring air resistance, all of it becomes kinetic energy: 48 J.

  5. Q18
    UnderstandingWhy are mountain roads made to wind round the hills instead of going straight up?
    Show answer

    A winding road is a long inclined plane of gentle slope. For the same height, its greater length gives a larger mechanical advantage, so vehicles need a smaller force to climb, and braking down is safer.

  6. Q19
    ApplicationA lever has an effort arm of 1.2 m and a load arm of 0.3 m. Find its mechanical advantage and the effort needed to lift a 600 N load.
    Show answer

    Mechanical advantage:

    =1.2 m0.3 m = 4
    effort=600 N4=150 N

3 marks each

Short answer questions

  1. Q20
    UnderstandingDerive the expression for the kinetic energy of an object of mass m moving with velocity v.
    Show answer

    Let a constant force F act on the object, at rest at first, and move it through a distance s until its velocity is v. Its acceleration a is constant.

    v2=0 + 2ass=v22aW=Fs = ma × v22a=12mv2

    By the work-energy theorem this work becomes kinetic energy: K = 12mv2.

  2. Q21
    ApplicationA 1000 kg car moving at 72 km h−1 is brought to rest in 50 m. Find (i) its kinetic energy, (ii) the work done by the brakes, (iii) the average braking force.
    Show answer

    72 km h−1 = 20 m s−1.

    (i) K=12 × 1000 × (20)2 J=200 000 J

    (ii) The brakes remove it all: −200 000 J.

    (iii) force=200 000 J50 m=4000 N, opposite to the motion
  3. Q22
    Analytical thinkingExplain, with the energy at each point, how the mechanical energy of a simple pendulum is conserved. Why does a real pendulum stop?
    Show answer
    A simple pendulum. The bob is released from P, at height h above its lowest point Q. At P and at R, on the other side, it stops for a moment and has only potential energy. At Q it moves fastest and has only kinetic energy. It rises almost to the level of P again.PRQhOnly potentialenergyOnly potentialenergyOnly kinetic energy
    Energy changes in a pendulum.
    • At the extreme points P and R, the bob stops for an instant: all its energy is potential (mgh).
    • At the lowest point Q it moves fastest: all its energy (above Q) is kinetic.
    • In between it has some of each; the total stays the same, so it rises to the same height on each side.
    • A real pendulum stops because friction at the support and air resistance turn mechanical energy into heat.
  4. Q23
    ApplicationA crane lifts a 500 kg load to a height of 12 m in 15 s. Find (i) the work done, (ii) the power of the crane. (g = 10 m s−2)
    Show answer
    (i) W=mgh=500 × 10 × 12 J=60 000 J(ii) P=60 000 J15 s=4000 W = 4 kW
  5. Q24
    UnderstandingWith a diagram, show the three classes of lever. Give one example of each.
    Show answer
    Three classes of lever. Class I: the fulcrum is between the load and the effort, as in scissors, a seesaw or a crowbar. Class II: the load is between the fulcrum and the effort, as in a wheelbarrow or a bottle opener. Class III: the effort is between the fulcrum and the load, as in tweezers or a broom. The green triangle is the fulcrum.LoadEffortClass I: fulcrum in betweenScissors, seesaw, crowbarLoadEffortClass II: load in betweenWheelbarrow, bottle openerEffortLoadClass III: effort in betweenTweezers, broom
    Three classes of lever.
  6. Q25
    ApplicationA 600 N box is pushed up a smooth ramp 4 m long onto a platform 1 m high. Find (i) the work done, (ii) the effort needed, (iii) the mechanical advantage.
    Show answer
    (i) W=mgh = 600 N × 1 m=600 J(ii) effort=600 J4 m=150 N

    (iii) Mechanical advantage:

    =600 N150 N = 4

4 marks each

Case-based questions

  1. Q26
    Analytical thinkingRead the case and answer the questions.

    At a water park, a 40 kg child starts from rest at the top of a slide 5 m high and splashes into a pool at the bottom. Take g = 10 m s−2.

    1. (i)What is the child’s potential energy at the top?1 mark
    2. (ii)Ignoring friction, find the child’s speed at the bottom.1 mark
    3. (iii)Her measured speed at the bottom is 9 m s−1. How much energy was turned into heat by friction?2 marks
    4. OR
    5. (iii)Would a 60 kg adult reach the bottom faster, slower or at the same speed (ignoring friction)? Explain.2 marks
    Show answer
    (i) U=40 × 10 × 5 J=2000 J(ii) v=√(2 × 10 × 5) m s−1=10 m s−1
    (iii) K=12 × 40 × 92 J=1620 Jheat=2000 J − 1620 J=380 J

    OR (iii): at the same speed. v = √(2gh) does not depend on mass: the adult has more potential energy, but also more mass to speed up.

  2. Q27
    ApplicationRead the case and answer the questions.

    Two students, Asha (45 kg) and Ravi (60 kg), race up the same staircase, 6 m high. Asha takes 9 s; Ravi takes 15 s. Take g = 10 m s−2.

    1. (i)Who does more work?1 mark
    2. (ii)Find Asha’s power.1 mark
    3. (iii)Find Ravi’s power and say who is more powerful.2 marks
    4. OR
    5. (iii)Express Asha’s power in horsepower (1 hp = 746 W).2 marks
    Show answer

    (i) Ravi: 60 × 10 × 6 J = 3600 J, compared with Asha’s 45 × 10 × 6 J = 2700 J.

    (ii) Asha=2700 J9 s=300 W(iii) Ravi=3600 J15 s=240 W

    Asha is more powerful: she does work at a faster rate.

    OR (iii)=300 W746 W hp≈0.40 hp
  3. Q28
    UnderstandingRead the case and answer the questions.

    A farmer uses a 2 m crowbar to lift a 900 N rock. He places a small stone as the fulcrum 0.4 m from the end under the rock and pushes down on the other end.

    1. (i)Name the load arm and the effort arm, with their lengths.1 mark
    2. (ii)What class of lever is this?1 mark
    3. (iii)Find the effort needed and the mechanical advantage.2 marks
    4. OR
    5. (iii)How could he lift the rock with even less effort? Explain.2 marks
    Show answer

    (i) Load arm = 0.4 m (fulcrum to rock); effort arm = 2 m − 0.4 m = 1.6 m.

    (ii) Class I: the fulcrum is between the load and the effort.

    (iii) effort=900 N × 0.4 m1.6 m=225 N

    Mechanical advantage:

    =900 N225 N = 4

    OR (iii): move the fulcrum closer to the rock (or use a longer bar). This shortens the load arm and lengthens the effort arm, raising the mechanical advantage.

5 marks each

Long answer questions

  1. Q29
    UnderstandingState the law of conservation of mechanical energy. Show that it holds for a freely falling body of mass m dropped from a height h, at the start, after falling for a time t, and just before it hits the ground.
    Show answer

    Law: if no external force other than gravity (such as friction) acts, the mechanical energy (kinetic + potential) of an object stays constant.

    An object dropped from rest at point A, height h. As it falls through B to C at the ground, its potential energy falls and its kinetic energy rises by the same amount. Bar charts show all potential energy at A, half and half at B, and all kinetic energy at C, with the total always equal to mgh.ABChA (top)B (halfway)C (bottom)PotentialKineticTotal = mgh
    Energy of a freely falling body.

    At the start (height h, at rest): U = mgh, K = 0; total mgh.

    After time t: v = gt and it has fallen 12gt2:

    U=mg(h − 12gt2)K=12mg2t2U + K=mgh

    Just before the ground: U = 0 and v2 = 2gh, so K = 12m(2gh) = mgh. The total is mgh throughout.

  2. Q30
    ApplicationA 0.5 kg ball is thrown vertically up at 12 m s−1. Taking g = 10 m s−2 and ignoring air resistance, find (i) its kinetic energy at the start, (ii) the maximum height it reaches, (iii) its speed when it is 4 m up, (iv) the work done by gravity on the way up and on the way down.
    Show answer
    (i) K=12 × 0.5 × 122 J=36 J(ii) h=36 J0.5 kg × 10 m s−2=7.2 m(iii) K at 4 m=36 J − (0.5 × 10 × 4) J=16 Jv=√(2 × 16 J0.5 kg)=8 m s−1

    (iv) Up: −36 J (gravity opposes the motion); down: +36 J (gravity along the motion).

  3. Q31
    Analytical thinkingWhat is a simple machine? Explain why a simple machine cannot reduce the work needed, using the example of a lever with an effort arm 4 times its load arm lifting a 200 N load by 5 cm.
    Show answer

    A simple machine is a device that makes a task easier by changing the size or direction of the force we apply. Examples: the lever, pulley and inclined plane.

    effort=200 N4=50 N

    The two ends of the lever turn through the same angle, so the effort end moves 4 times as far as the load end: 4 × 5 cm = 20 cm.

    work out=200 N × 0.05 m=10 Jwork in=50 N × 0.20 m=10 J

    The effort is 4 times smaller, but it moves 4 times further: the work is the same (10 J). A machine trades force for distance; with friction, the work put in is even a little more than the useful work.