In this chapter 10 topics
1Work done by a constant force
Lifting three bags takes three times the work of lifting one; lifting one bag three times as high also takes three times the work. So work depends on the force and on the distance moved in the direction of the force.
Work done by a constant force
Work done on an object = force applied × displacement in the direction of the force.
W = F × s
- Always say which force does the work and on which object.
- SI unit: the joule (J). 1 J is the work done when a force of 1 N moves an object 1 m in the direction of the force: 1 J = 1 N × 1 m = 1 kg m2 s−2.
- Work has no direction, but it can be positive or negative.
- The work is the area under a force-displacement graph. This works even when the force is not constant.
When is no work done?
- When the force is zero (F = 0).
- When there is no displacement (s = 0): pushing a rigid wall does no work on the wall. You still feel tired, because your muscles use your body’s energy to keep pushing.
- When the force is at right angles to the displacement: carrying a box while walking on level ground, your upward force does no work on the box.
Remember
- W = F × s, with s measured in the direction of the force.
- Unit: joule (J) = newton metre.
- No displacement, or force at right angles to it: no work.
Quick checkA force of 25 N pushes a crate 4 m along the floor in the direction of the force. How much work is done?Show answer
2Positive, negative and zero work
| Positive work | Negative work | |
|---|---|---|
| Force and displacement | In the same direction | In opposite directions |
| Effect on the object | Speeds it up, or gives it energy | Slows it down, or takes energy away |
| Examples | Pushing a wheelchair forwards; lifting a dumbbell | A goalkeeper stopping a ball; friction on a sliding object; lowering a dumbbell slowly |
- When a ball hits a goalkeeper’s hands, each pushes on the other (third law). The goalkeeper does negative work on the ball; the ball does positive work on the goalkeeper.
Worked example 1
A cricketer stops a ball by moving her hands back 20 cm while pushing on it with a force of 150 N. How much work does she do on the ball?
- Given
- F = 150 N, against the motiondisplacement = 20 cm = 0.2 m
- Find
- the work done on the ball
Solution
The ball moves opposite to her force, so take its displacement as −0.2 m.
She does −30 J of work: negative work that takes 30 J of energy from the ball.
Remember
- Force along the motion: positive work. Against it: negative work. At right angles: zero.
Quick checkIs the work done by friction on a coin sliding across a table positive, negative or zero?Show answer
Negative. Friction acts opposite to the coin’s displacement.
3Energy and the work-energy theorem
Energy
The capacity to do work. An object that can do work has energy.
- A thrown cricket ball can knock the wickets over; a flowerpot on a ledge can break something below it if it falls. Each got its energy from the work done on it: throwing the ball, lifting the pot.
- When positive work is done on an object, it gains energy. It can then push on another object and pass energy on.
Work-energy theorem
The work done on an object (or a system) equals the change in its energy.
- SI unit of energy: the joule (J), the same as work. It is named after James Prescott Joule, who showed how mechanical energy and heat are related.
- Energy can also be transferred as heat, by radiation (sunlight), in electric circuits, by sound waves and in nuclear reactions.
Forms of energy
| Form | What it is | Example of a change |
|---|---|---|
| Mechanical | Energy due to motion or position | A falling stone: potential to kinetic |
| Thermal | Energy that makes things warm or hot | Rubbing hands: kinetic to thermal |
| Light | Energy that lets us see | A bulb: electrical to light |
| Sound | Energy of vibrations of air or other materials | A ringing bell: mechanical to sound |
| Electrical | Energy linked to the position or motion of charges | A water heater: electrical to thermal |
| Chemical | Energy stored in the bonds of fuels and food | Food in muscles: chemical to mechanical |
| Nuclear | Energy stored in the nuclei of atoms | The Sun: nuclear to light and heat |
Remember
- Energy = capacity to do work; unit joule.
- Work done on an object = change in its energy.
- Energy changes from one form to another.
Quick checkIn what forms does the energy from your muscles appear when you pedal a bicycle on a flat road?Show answer
Mostly as the kinetic energy of you and the bicycle. Some becomes heat (friction in the chain, wheels and tyres, air resistance, and your warm body) and a little sound.
4Kinetic energy
Kinetic energy
The energy an object has because of its motion. Every moving object has it.
Finding the formula
A constant force F acts on a mass m, changing its velocity from u to v over a displacement s. From v2 = u2 + 2as:
This is the change in kinetic energy. Starting from rest (u = 0), the kinetic energy of a mass m moving at v is:
K = 12mv2
- Unit: joule. Kinetic energy has no direction and is never negative.
- Positive work on an object increases its speed and kinetic energy; negative work decreases them; no work leaves them unchanged.
- Kinetic energy depends on the square of the speed: twice the speed means four times the kinetic energy.
Worked example 2
A 0.16 kg ball is bowled at 90 km h−1. Find its kinetic energy.
- Given
- m = 0.16 kgv = 90 km h−1 = 25 m s−1
- Find
- kinetic energy K
Solution
The ball has 50 J of kinetic energy.
Worked example 3
A 1200 kg car moving at 20 m s−1 brakes to a stop in 40 m. Find the (constant) braking force.
- Given
- m = 1200 kgu = 20 m s−1, v = 0s = 40 m
- Find
- the braking force
Solution
By the work-energy theorem, the brakes do −240 000 J of work over 40 m, so the braking force is 6000 N, opposite to the motion.
Remember
- K = 12mv2.
- Double the speed: four times the kinetic energy. Double the mass: twice the kinetic energy.
- Work done = change in kinetic energy.
Quick checkObjects A (mass m) and B (mass 4m) have the same kinetic energy. What is the ratio of their speeds?Show answer
5Potential energy
Potential energy
The energy stored in an object because of its deformation (change of shape), or in a system of objects because of their relative positions.
- Elastic: a stretched slingshot (gulel) or rubber band, a bent bow or a compressed spring stores the work done to deform it. Released, it gives kinetic energy to a stone, an arrow or a ball.
- Magnetic and electric: pulling apart unlike poles of two magnets, or two opposite charges, stores energy; released, they rush together.
- Gravitational: lifting a ball away from the Earth stores energy in the Earth-ball system. As the Earth hardly moves, we call it the gravitational potential energy of the ball.
Gravitational potential energy
- Activity 7.1: a heavy ball dropped into sand from 2 m makes a deeper dent than from 1 m. The higher the ball, the more work was done to lift it and the more energy it has.
- To lift a mass m slowly through a height h, the force needed is mg, so the work done is mg × h.
U = mgh
- Taking the potential energy on the ground as zero.
- Valid near the Earth’s surface; far away, g is smaller.
- It depends only on the height, not on the path taken to get there.
- Work done against friction is not stored as potential energy; it becomes heat.
Worked example 4
A 250 g ball is thrown up to a height of 12 m. Find its potential energy at the top (take g = 10 m s−2).
- Given
- m = 250 g = 0.25 kgh = 12 m
- Find
- potential energy U
Solution
At the top the ball has 30 J of potential energy.
Remember
- U = mgh near the Earth.
- Stored energy can come from shape (springs, bows) or position (height, magnets, charges).
- Moving sideways at the same height does not change U.
Quick checkA 2 kg book is lifted from the floor onto a 1.5 m shelf. What potential energy does it gain (g = 10 m s−2)?Show answer
6Conservation of mechanical energy
Mechanical energy
Kinetic energy + potential energy.
Conservation of mechanical energy
If no other external force (such as friction) acts, an object moving under gravity keeps the same mechanical energy: what it loses in potential energy, it gains in kinetic energy.
| Point | Potential energy | Kinetic energy | Total |
|---|---|---|---|
| A (released, height h) | mgh | 0 | mgh |
| B (after time t, height h′) | mgh − 12mg2t2 | 12mg2t2 | mgh |
| C (just above the ground) | 0 | mgh | mgh |
Activity 7.2: the pendulum
- Released at P, the bob swings through Q and rises almost to the same level at R.
- In real life it slowly swings less high and stops: friction at the support and air resistance turn mechanical energy into heat.
- In nature, the total energy (all forms together) of a system with no external forces stays constant.
Using conservation of energy
- A child slides down a smooth slide of height h: 12mv2 = mgh, so v = √(2gh). The speed at the bottom depends only on the height, not on the shape of the slide or the mass of the child (ignoring friction).
Worked example 5
A stone is dropped from a 20 m high cliff. Find its speed just before it hits the ground (g = 10 m s−2, ignore air resistance).
- Given
- h = 20 mu = 0
- Find
- the speed v
Solution
It hits the ground at 20 m s−1, whatever its mass.
Worked example 6
A 2000 kg truck moving at 15 m s−1 runs onto a level bed of gravel that exerts a 9000 N resisting force. How far does it go before stopping?
- Given
- m = 2000 kgu = 15 m s−1
- Find
- stopping distance d
Solution
The gravel does −225 000 J of work and stops the truck in 25 m. (Escape ramps on hills also slope upwards, so the truck gains potential energy and stops even sooner.)
Bridging science and society
In the Himalayan region, the gharat or panchakki is a water mill: water flowing downhill turns its potential energy into kinetic energy, which turns a wheel that drives a grinding stone. Dams do the same on a large scale to generate electricity.
Remember
- Mechanical energy = kinetic + potential.
- Without friction it stays constant: loss of U = gain of K.
- Speed after falling height h: v = √(2gh).
Quick checkWhy does each hump of a roller-coaster track have to be lower than the one before?Show answer
Friction and air resistance turn some mechanical energy into heat all the way along. With less mechanical energy left, the car (or ball) cannot rise as high as before.
7Power
Running up the stairs in one minute and walking up in five minutes take the same work, but feel very different. The difference is power.
Power
The rate at which work is done: work done divided by the time taken.
P = Wt
- SI unit: the watt (W). 1 W = 1 joule per second (1 J s−1). Also 1 kilowatt (kW) = 1000 W.
- More work in the same time, or the same work in less time, needs more power.
- The horsepower (1 hp = 746 W) is still used for engines and pumps. The watt is named after James Watt, who built an efficient steam engine.
Worked example 7
A girl of mass 45 kg runs up a staircase 6 m high in 9 s. Find her power (g = 10 m s−2).
- Given
- m = 45 kgh = 6 mt = 9 s
- Find
- power P
Solution
Her power is 300 W.
Worked example 8
A 900 kg car speeds up from rest to 10 m s−1 in 5 s. Find the average power of its engine (ignore friction).
- Given
- m = 900 kgu = 0, v = 10 m s−1t = 5 s
- Find
- power
Solution
The engine’s average power is 9000 W (9 kW).
Remember
- P = Wt; unit watt = joule per second.
- 1 hp = 746 W.
Quick checkA pump lifts 600 kg of water through 10 m in 1 minute. Find its power (g = 10 m s−2).Show answer
8Simple machines and the pulley
Simple machine
A device that makes a task easier by changing the size or direction of the force we must apply. It does not reduce the total work needed.
- Effort: the force we apply to the machine.
- Load: the force to be overcome (often a weight).
Mechanical advantage
The ratio of the load to the effort.
mechanical advantage = loadeffort
The pulley
Pulley
A wheel with a groove that guides a rope.
- A fixed pulley at the top lets us pull down to raise a flag or a load, which is easier than lifting it straight up.
- The effort equals the load, so its mechanical advantage is 1: it gives convenience, not a smaller force.
- Movable pulleys and systems of pulleys can have a mechanical advantage greater than 1, as in cranes and lifts.
Remember
- Mechanical advantage = loadeffort.
- Fixed pulley: mechanical advantage 1; it only changes the direction of the force.
Quick checkA worker uses a machine to lift a 600 N load with an effort of 150 N. Find the mechanical advantage.Show answer
9The inclined plane
Inclined plane
A sloping surface (a ramp) used to raise a heavy load to a higher level, or lower it, with a smaller force.
- Activity 7.3: pulling a toy cart up a plank onto a pile of books needs a smaller spring balance reading than lifting it straight up, and the reading falls further as the plank is made less steep. But the cart must be pulled over a longer distance.
Ignoring friction, the work done pushing the load up the slope equals the potential energy it gains:
So the mechanical advantage of an inclined plane is:
loadeffort = mgF' = Lh
- As L is longer than h, the mechanical advantage is more than 1.
- A longer, gentler slope gives a larger mechanical advantage and a smaller effort.
- Roads on hills wind round gentle slopes, and an inclined ladder is easier to climb than a vertical one, for the same reason.
Worked example 9
A ramp 2.5 m long is used to load a box onto a platform 0.5 m high. Find its mechanical advantage, and the effort needed for a 400 N box (ignore friction).
- Given
- L = 2.5 mh = 0.5 mload = 400 N
- Find
- mechanical advantage and effort
Solution
The mechanical advantage is 5, so an 80 N push moves the 400 N box up the ramp.
Remember
- Inclined plane: mechanical advantage = Lh, more than 1.
- Less force, but over a longer distance: the work is the same.
Quick checkA ramp 50 cm long rises through a height of 30 cm. Find its mechanical advantage.Show answer
10The lever
Lever
A rigid bar that can turn about a fixed point. In Activity 7.4, a ruler resting on a pencil lets one light eraser lift a heavy stapler.
- Fulcrum: the fixed point about which the lever turns.
- Load: the force to be overcome.
- Effort: the force applied.
- Load arm: the distance of the load from the fulcrum. Effort arm: the distance of the effort from the fulcrum.
The end with the small effort moves a long way; the end with the large load moves a short way. The work in equals the work out:
F1 × d1 = F2 × d2
effort × effort arm = load × load arm
mechanical advantage = loadeffort = effort armload arm
- Activity 7.5: on a beam balance, 1 coin 20 cm from the centre balances 2 coins at 10 cm, 4 coins at 5 cm, and so on: n1L1 = n2L2.
- A longer effort arm means a smaller effort. The effort moves further, so the total work is not reduced.
Worked example 10
On a seesaw, a 20 kg child sits 1.5 m from the fulcrum. Where must a 30 kg child sit on the other side to balance it?
- Given
- 20 kg at 1.5 m30 kg at distance d
- Find
- the distance d
Solution
The weights are mg; g is the same on both sides and cancels.
The heavier child sits 1 m from the fulcrum.
Three classes of lever
Machines from simple machines
Most machines combine several simple machines. Ignoring friction, the work put in equals the useful work done on the load. Machines do not create energy; they help us use it more conveniently. A perpetual motion machine, running for ever with no fuel, is impossible: friction always turns some energy into heat.
Remember
- Effort × effort arm = load × load arm.
- Mechanical advantage of a lever = effort armload arm.
- Simple machines reduce the force, not the work.
Quick checkWhy is it easier to open a tin lid with the end of a spoon?Show answer
The spoon is a lever with its fulcrum on the rim of the tin. Your effort at the far end of the handle has a long effort arm, while the lid (load) is very close to the fulcrum. The large mechanical advantage gives a big force on the lid.