Sound Waves: Characteristics and Applications
How sound is made, travels and is used: vibrations, propagation through a medium, compressions and rarefactions, longitudinal waves, the energy of sound, the density graph, wavelength, frequency, time period, amplitude, intensity, the speed of sound, pitch, loudness and the audible range, echo and reverberation, and uses of ultrasound and infrasound.
Questions on the ideas that come up most often in school tests and exams, in the same formats as CBSE papers. Each question shows the skill it tests. Try each one before you open the answer.
What school exams ask most
How this chapter is tested
- Sound Waves is a calculation-heavy chapter. Papers nearly always have a sum on v = λ × ν, one on echoes or sonar, and a question on compressions and rarefactions.
- The ideas asked most often are: sound needs a medium (the bell jar); compressions, rarefactions and longitudinal waves; the density graph; wavelength, frequency, time period and amplitude; the speed of sound in different media; pitch, loudness and the audible range; echo, reverberation and sonar.
- It is tested through multiple-choice and assertion–reason questions, 2 and 3-mark sums and diagrams, case-based questions on thunder and sonar, and long answers on wave graphs and echoes.
- Marks are lost for forgetting to halve the echo or sonar time, for not converting kHz to Hz or cm to m, for mixing up pitch (frequency) with loudness (amplitude), and for unlabelled graphs.
Asked most often, with questions to practise
1 mark each
Multiple choice questions
- Q1UnderstandingWhich of the following does NOT need a medium to travel?(a) sound(b) ultrasound(c) light(d) infrasound
Show answer
(c) light
Light is not a mechanical wave; all sound waves, audible or not, need a medium.
- Q2ApplicationA tuning fork makes 512 vibrations in one second. The time period of the sound is(a) 512 s(b) 0.512 s(c) 0.00195 s(d) 1.95 s
Show answer
(c) 0.00195 s
T=1512 Hz=0.00195 s - Q3UnderstandingIn a sound wave, a rarefaction is a region of(a) higher density than average(b) lower density than average(c) maximum density(d) no particles at all
Show answer
(b) lower density than average
The particles are spread out more than usual.
- Q4ApplicationA sound of wavelength 0.85 m travels at 340 m s−1. Its frequency is(a) 289 Hz(b) 400 Hz(c) 340 Hz(d) 0.0025 Hz
Show answer
(b) 400 Hz
ν=340 m s−10.85 m=400 Hz - Q5UnderstandingIf the frequency of a sound in air is doubled, its wavelength(a) doubles(b) is halved(c) stays the same(d) becomes four times
Show answer
(b) is halved
The speed stays the same, and v = λ × ν.
- Q6Analytical thinkingTwo sounds have the same frequency but sound A is louder than sound B. Then A has a greater(a) wavelength(b) pitch(c) amplitude(d) speed
Show answer
(c) amplitude
Same frequency means the same pitch and wavelength; loudness depends on amplitude.
- Q7UnderstandingWhich animal can hear infrasound?(a) bat(b) dolphin(c) elephant(d) dog
Show answer
(c) elephant
Bats, dolphins and dogs hear ultrasound.
- Q8ApplicationA sonar pulse returns 3 s after being sent. If sound travels at 1500 m s−1 in seawater, the depth is(a) 4500 m(b) 2250 m(c) 1500 m(d) 500 m
Show answer
(b) 2250 m
d=1500 m s−1 × 3 s2=2250 m
1 mark each
Assertion–reason questions
Each question has two statements: an Assertion (A) and a Reason (R). Choose the correct option:
- (a)Both A and R are true, and R is the correct explanation of A.
- (b)Both A and R are true, but R is not the correct explanation of A.
- (c)A is true, but R is false.
- (d)A is false, but R is true.
- Q9UnderstandingAssertion (A): Astronauts in space cannot hear each other speak directly.Reason (R): Sound is a mechanical wave and needs a medium to travel.
Show answer
(a) Both A and R are true, and R is the correct explanation of A.
Space is nearly a vacuum.
- Q10UnderstandingAssertion (A): Sound travels faster in steel than in air.Reason (R): The particles of a solid are closely packed and pass on vibrations quickly.
Show answer
(a) Both A and R are true, and R is the correct explanation of A.
About 5000 m s−1 in steel against 340 m s−1 in air.
- Q11ApplicationAssertion (A): The time period of a sound wave increases when its frequency increases.Reason (R): Frequency and time period are inversely related.
Show answer
(d) A is false, but R is true.
R is true, so A is false: a higher frequency means a shorter time period.
- Q12Analytical thinkingAssertion (A): We see the lightning before we hear the thunder.Reason (R): Lightning is produced before thunder.
Show answer
(c) A is true, but R is false.
Both are produced at the same moment. We see the flash first because light travels much faster than sound.
- Q13UnderstandingAssertion (A): An echo is not heard in a small room.Reason (R): The reflected sound reaches the listener in less than 0.1 s.
Show answer
(a) Both A and R are true, and R is the correct explanation of A.
The brain cannot separate two sounds less than 0.1 s apart.
2 marks each
Very short answer questions
- Q14UnderstandingDescribe an experiment to show that sound needs a medium to travel.
Show answer
Hang an electric bell inside a glass bell jar connected to a vacuum pump and switch it on. As the air is pumped out, the ringing becomes fainter and almost stops, though the hammer is seen striking. When air is let back in, the sound returns. So sound needs a medium.
- Q15UnderstandingDistinguish between a compression and a rarefaction.
Show answer
Compression Rarefaction Density and pressure Higher than average Lower than average Particles Crowded together Spread apart On a density graph Crest Trough - Q16ApplicationA wave has a frequency of 250 Hz and a wavelength of 1.4 m. Find (i) its speed, (ii) its time period.
Show answer
(i) v=1.4 m × 250 Hz=350 m s−1(ii) T=1250 Hz=0.004 s - Q17UnderstandingDefine (i) pitch and (ii) loudness. On which property of a sound wave does each mainly depend?
Show answer
- (i) Pitch is how high or low we hear a sound; it depends mainly on the frequency.
- (ii) Loudness is how strong we hear a sound; it depends mainly on the amplitude.
- Q18ApplicationA person hears the echo of his shout from a hill 2 s later. Find the distance of the hill. (speed of sound = 340 m s−1)
Show answer
d=340 m s−1 × 2 s2=340 m - Q19UnderstandingGive two uses of ultrasound.
Show answer
- Ultrasonography: making images of internal organs, such as a baby in the womb, without surgery.
- Finding cracks and defects inside metal blocks; cleaning delicate parts; sonar.
3 marks each
Short answer questions
- Q20UnderstandingExplain how a vibrating object produces a sound wave in air. Draw a diagram showing compressions and rarefactions.
Show answer
As the object moves forward, it pushes the air next to it and crowds the particles into a compression. As it moves back, it leaves a region of spread-out particles, a rarefaction. Each crowded layer pushes the next, so compressions and rarefactions travel outwards, while every particle only vibrates about its own position.
An oscillating piston makes compressions (C) and rarefactions (R). - Q21ApplicationThe graph of a sound wave shows 4 complete waves over 2 m. If the frequency is 680 Hz, find (i) the wavelength, (ii) the speed, (iii) the time period.
Show answer
(i) λ=2 m4=0.5 m(ii) v=0.5 m × 680 Hz=340 m s−1(iii) T=1680 Hz=0.00147 s - Q22UnderstandingWhy is sound called a longitudinal mechanical wave? How is a transverse wave different?
Show answer
- Longitudinal: the particles of the medium vibrate parallel to the direction in which the sound travels.
- Mechanical: it needs a material medium to travel.
- In a transverse wave, the particles vibrate at right angles to the direction of travel, as in a wave on a rope.
Longitudinal and transverse waves. - Q23Analytical thinkingExplain why the intensity of sound decreases as we move away from the source. Why can a loud sound be heard farther away than a soft one?
Show answer
The sound energy spreads out over a larger and larger area as it travels, so less energy passes through each unit area each second: the intensity falls.
A loud sound has a larger amplitude and so more energy to begin with. It can spread over a larger area before its intensity becomes too small to hear.
- Q24ApplicationA boy stands between two cliffs and claps. He hears the first echo after 2 s and the second after 3 s. Find the distance between the cliffs. (speed of sound = 340 m s−1)
Show answer
d1=340 m s−1 × 2 s2=340 md2=340 m s−1 × 3 s2=510 mdistance=340 m + 510 m=850 m - Q25UnderstandingWhat is reverberation? Give two ways of reducing it in an auditorium.
Show answer
Reverberation is the persistence of sound in a large hall because of repeated reflections from the walls, floor and ceiling, which reach the listener less than about 0.05 s apart.
- Cover walls and ceilings with sound-absorbing panels such as fibreboard or rough plaster.
- Use heavy curtains, carpets and upholstered seats.
4 marks each
Case-based questions
- Q26ApplicationRead the case and answer the questions.
During a thunderstorm, a student counts 4 s between seeing a lightning flash and hearing the thunder. She knows sound travels at about 340 m s−1 in air and light at 3 × 108 m s−1.
- (i)Why does she see the flash before she hears the thunder?1 mark
- (ii)How far away was the lightning?1 mark
- (iii)On a much colder night, would the same storm’s thunder take more or less time to reach her? Explain.2 marks
- OR
- (iii)If the thunder has a frequency of 85 Hz, what is its wavelength? Can she hear it?2 marks
Show answer
(i) Light travels about a million times faster than sound, so it arrives almost at once.
(ii) distance=340 m s−1 × 4 s=1360 m(iii) More time: sound travels more slowly in colder air.
OR (iii):
λ=340 m s−185 Hz=4 mYes: 85 Hz lies within the audible range of 20 Hz to 20 kHz.
- Q27Analytical thinkingRead the case and answer the questions.
A ship uses sonar to find a shipwreck. It sends ultrasonic pulses of frequency 50 kHz into the sea, where sound travels at 1500 m s−1. An echo returns 1.2 s after a pulse is sent.
- (i)What does sonar stand for?1 mark
- (ii)How deep is the wreck?1 mark
- (iii)Find the wavelength of the ultrasound in seawater. Why is ultrasound used rather than audible sound?2 marks
- OR
- (iii)Name two animals that use the same principle, and say what it is called.2 marks
Show answer
(i) Sound navigation and ranging.
(ii) depth=1500 m s−1 × 1.2 s2=900 m(iii) λ=1500 m s−150 000 Hz=0.03 m = 3 cmUltrasound has a short wavelength, so it travels as a narrow beam and gives sharp echoes even from small objects.
OR (iii): bats and dolphins (also whales). The principle is echolocation.
- Q28UnderstandingRead the case and answer the questions.
A music teacher strikes a tuning fork marked 256 Hz and then one marked 512 Hz, with equal force. Students notice that the second sounds shriller. When she strikes the first fork harder, it sounds louder but not shriller.
- (i)Which property of the sound makes the second fork shriller?1 mark
- (ii)What changes when the first fork is struck harder?1 mark
- (iii)Compare the wavelengths of the two sounds in air. Explain.2 marks
- OR
- (iii)Find the time period of the 512 Hz sound, and say how many times it vibrates in 0.5 s.2 marks
Show answer
(i) Its higher frequency, which we hear as a higher pitch.
(ii) The amplitude, so the loudness; the frequency stays the same.
(iii) Both travel at the same speed in air. Since v = λ × ν, doubling the frequency halves the wavelength: the 512 Hz sound has half the wavelength of the 256 Hz sound.
OR (iii):
T=1512 Hz=0.00195 svibrations=512 × 0.5=256
5 marks each
Long answer questions
- Q29UnderstandingDraw a density-distance graph of a sound wave and mark on it a crest, a trough, the wavelength and the amplitude. Define wavelength, frequency, time period and amplitude, and give the relation between speed, wavelength and frequency.
Show answer
Crests match compressions and troughs match rarefactions. The amplitude is the height of a crest above the average line. - Wavelength (λ): the distance between two consecutive crests or troughs; unit m.
- Frequency (ν): the number of complete oscillations per second at a point; unit Hz.
- Time period (T): the time for one complete oscillation; unit s; ν = 1T.
- Amplitude: the largest change in density from the average.
In one time period the wave moves one wavelength, so v = λT = λ × ν.
- Q30ApplicationWhat is an echo? State the condition for hearing a distinct echo and find the minimum distance needed in air at 340 m s−1. A sound is reflected from a building 85 m away; when is the echo heard?
Show answer
An echo is the repetition of a sound caused by its reflection from a distant hard surface.
Condition: the reflected sound must reach the listener at least 0.1 s after the original.
The sound covers twice the distance to the wall. 2d=340 m s−1 × 0.1 s=34 md=17 mThe surface must be at least 17 m away.
t=2 × 85 m340 m s−1=0.5 sThe echo is heard after 0.5 s.
- Q31Analytical thinkingDefine the audible range of hearing. What are infrasonic and ultrasonic waves? Describe how sonar works, and find the distance of a submarine if the echo returns in 0.8 s (speed of sound in seawater = 1530 m s−1).
Show answer
The audible range is the range of frequencies humans can hear: about 20 Hz to 20 000 Hz. Infrasonic waves are below 20 Hz; ultrasonic waves are above 20 kHz.
Sonar: ultrasound is sent down and the echo is timed. A ship sends a pulse of ultrasound into the water. It reflects from the sea bed or an object, and a detector on the ship picks up the echo. From the time t and the speed v of sound in water, the distance is d = v × t2.
d=1530 m s−1 × 0.8 s2=612 m