Chapter 9 · Chemistry

Atomic Foundations of Matter

How atoms combine to make matter: the law of conservation of mass, the law of constant proportions, Dalton’s atomic theory, molecules, covalent and ionic bonds, naming compounds, writing chemical formulae, the properties of ionic and covalent compounds, and molecular and formula unit mass.

Revising? See the rules for formulae and masses on one page, and play the bonding games.
In this chapter 11 topics
  1. 1The law of conservation of mass
  2. 2The law of constant proportions
  3. 3Dalton’s atomic theory
  4. 4Molecules and chemical bonds
  5. 5Covalent bonds: sharing electrons
  6. 6Naming covalent compounds
  7. 7Ionic bonds: transferring electrons
  8. 8Common ions and naming ionic compounds
  9. 9Writing chemical formulae
  10. 10Properties of ionic and covalent compounds
  11. 11Molecular mass and formula unit mass

1The law of conservation of mass

Activity 9.1: a physical change

  • Salt is dissolved in water in a beaker on a digital balance. The reading stays the same (55.010 g before, 55.011 g after: the last digit varies by ±1 in any measurement).
  • So the mass does not change in a physical change. Tearing a piece of paper gives the same result.

Activity 9.2: a chemical change

vinegar + baking soda (sodium hydrogencarbonate) → carbon dioxide + other substances

Set-up 1: open flaskSet-up 2: balloon fixed over the flask
What happensBrisk fizzing; the gas escapes into the airBrisk fizzing; the gas is trapped and blows up the balloon
Reading after the reactionLess than beforeThe same as before
WhyThe mass of the escaped carbon dioxide is not weighedEverything formed is still on the balance
Experimental set-up 2. A balloon holding baking soda is fixed over the mouth of a flask of vinegar on a balance. When the baking soda is tipped in, the gas formed blows up the balloon, but the reading hardly changes: about 22.51 grams before and after, within the error of the balance.22.512 gBefore mixing22.510 gAfter mixing
Figure 1. In a closed set-up the total mass does not change.

Law of conservation of mass

Mass can neither be created nor destroyed in a chemical reaction: the total mass of the reactants equals the total mass of the products. Proposed by Antoine Lavoisier (1789), the “father of modern chemistry”.

  • Activity 9.3: sodium sulphate and barium chloride solutions are mixed in flasks on a balance. A white precipitate of barium sulphate forms, and the reading stays the same (20.218 g and 20.217 g). No gas forms, so an open flask is fine here.

sodium sulphate + barium chloride → barium sulphate + sodium chloride

Worked example 1

In a closed container, 4.0 g of calcium carbonate reacts with 2.92 g of hydrochloric acid, giving 1.76 g of carbon dioxide, 0.72 g of water and 4.44 g of calcium chloride. Is the law obeyed?

Given
reactants: 4.0 g and 2.92 gproducts: 1.76 g, 0.72 g and 4.44 g
Find
whether the masses are equal

Solution

reactants=4.0 g + 2.92 g=6.92 gproducts=1.76 g + 0.72 g + 4.44 g=6.92 g

Total mass of reactants = total mass of products, so the law is obeyed.

Worked example 2

12 g of carbon combines with 32 g of oxygen to form 44 g of carbon dioxide. How much carbon dioxide do 3 g of carbon give?

Given
12 g of carbon gives 44 g of carbon dioxide
Find
carbon dioxide from 3 g of carbon

Solution

carbon dioxide=4412 × 3 g=11 g

3 g of carbon gives 11 g of carbon dioxide.

Remember

  • Total mass before = total mass after a chemical reaction.
  • If a gas forms, close the system (for example with a balloon) before weighing.
Quick checkA student burns 10 g of ethanol in an open beaker and nothing is left. Does this break the law?Show answer

No. The products, carbon dioxide and water vapour, escape into the air. Weighed with the oxygen used, the total mass would be unchanged.

2The law of constant proportions

Law of constant (definite) proportions

In a compound, the elements are always combined in a fixed ratio by mass, whatever the source of the compound or the way it is made. Proposed by Joseph Proust; also called Proust’s law.

  • Pure water from a river, a borewell or the sea always has hydrogen and oxygen in the mass ratio 1 : 8: 9 g of water gives 1 g of hydrogen and 8 g of oxygen.
  • Proust showed that copper carbonate always contains copper, carbon and oxygen in the same proportions by mass.
  • Cinnabar (hingula), a red rock pigment, is always about 86.22% mercury and 13.78% sulphur by mass.
  • The law holds for compounds, not mixtures: a mixture’s parts can be present in any proportion.

Worked example 3

Sodium chloride contains sodium and chlorine in the mass ratio 23 : 35.5. How much chlorine is needed to react completely with 46 g of sodium?

Given
ratio Na : Cl = 23 : 35.5sodium = 46 g
Find
mass of chlorine

Solution

chlorine=35.523 × 46 g=71 g

71 g of chlorine is needed.

Remember

  • A compound always has the same elements in the same ratio by mass.
  • Water: hydrogen to oxygen = 1 : 8 by mass.
Quick checkCarbon monoxide has carbon and oxygen in the mass ratio 3 : 4. How much oxygen combines with 6 g of carbon?Show answer
oxygen=43 × 6 g=8 g

3Dalton’s atomic theory

John Dalton (1808) explained the two laws with these postulates:

  1. All matter is made of very tiny particles called atoms, which take part in chemical reactions.
  2. Atoms are indivisible and cannot be created or destroyed in a chemical reaction.
  3. Atoms of a given element are identical in mass and chemical properties.
  4. Atoms of different elements have different masses and chemical properties.
  5. Atoms combine in the ratio of small whole numbers to form compounds.
  6. The relative number and kinds of atoms are constant in a given compound.
PostulateExplains
Atoms are neither created nor destroyed; they only rearrangeConservation of mass
Atoms combine in fixed, whole-number ratiosConstant proportions
  • When magnesium burns in air, its atoms combine with oxygen atoms to form white magnesium oxide; the atoms themselves are not destroyed.
  • We now know atoms are made of smaller particles (Chapter 8), but Dalton’s ideas remain the basis of chemistry.

Remember

  • Dalton: atoms are indivisible, cannot be created or destroyed, and combine in simple whole-number ratios.
Quick checkWhich postulate explains the law of conservation of mass?Show answer

Atoms can neither be created nor destroyed in a chemical reaction: they only rearrange, so the total mass stays the same.

4Molecules and chemical bonds

Molecule

An electrically neutral group of two or more atoms joined together, which can exist on its own and shows all the properties of the substance.

  • A molecule of an element has atoms of one kind: H2, O2, Cl2.
  • A molecule of a compound has atoms of different elements: HCl, H2O.
  • Some elements, such as helium and neon, exist as single atoms because their atoms are already stable.
  • O means one oxygen atom; O2 means one oxygen molecule, made of two atoms.

Atoms with fewer than 8 electrons in their outermost shell (or 2 in the K shell) become stable by:

  • sharing electrons with another atom (covalent bond), or
  • transferring electrons: one atom loses them and another gains them (ionic bond).

Chemical bond

The force that holds atoms together. When atoms bond, their total energy becomes lower, so the arrangement is more stable.

Remember

  • O is an atom; O2 is a molecule.
  • Atoms bond to complete their outer shell: by sharing (covalent) or transferring (ionic) electrons.
Quick checkWhy does neon not form molecules?Show answer

Neon (2, 8) already has a complete octet, so it has no need to share, gain or lose electrons.

5Covalent bonds: sharing electrons

Covalent bond

A bond formed when two atoms share a pair of electrons. The shared pair attracts both nuclei and holds the atoms together.

In the diagrams, one atom’s electrons are blue and the other’s orange; shared electrons sit where the shells overlap.

Two hydrogen atoms share one pair of electrons, forming a hydrogen molecule. Electrons from one atom are blue and from the other are orange.H2​ (H—H, single bond)
Figure 2. Each hydrogen atom has 1 electron and needs 1 more. Sharing one pair gives each a full K shell.
Two chlorine atoms share one pair of electrons, forming a chlorine molecule. Electrons from one atom are blue and from the other are orange.Cl2​ (Cl—Cl, single bond)
Figure 3. Each chlorine atom (2, 8, 7) shares one electron: a single bond.
Two oxygen atoms share two pairs of electrons, forming a oxygen molecule. Electrons from one atom are blue and from the other are orange.O2​ (O=O, double bond)
Figure 4. Each oxygen atom (2, 6) needs 2 electrons: two shared pairs make a double bond.
BondShared pairsDrawn asExample
Single1one lineH—H, Cl—Cl, H—Cl
Double2two linesO=O
Triple3three linesN≡N

Molecules of compounds

A hydrogen atom and a chlorine atom share one pair of electrons, forming a hydrogen chloride molecule, H—Cl.HCl (H—Cl)
Figure 5. Hydrogen and chlorine each need one electron, so they share one pair: hydrogen chloride.
An oxygen atom shares one pair of electrons with each of two hydrogen atoms, forming a water molecule.H2​O (H—O—H)
Figure 6. Oxygen needs two electrons; it shares one pair with each of two hydrogen atoms: water.
  • Compounds held by shared electrons are covalent compounds: HCl, H2O, CO2, NH3.

Bridging science and society

Splitting or joining atomic nuclei releases enormous energy, used to make electricity in nuclear power stations and in medicine and space research. Raja Ramanna, often called the father of the Indian nuclear programme, helped develop India’s nuclear energy for peaceful use.

Remember

  • Covalent bond = shared pair of electrons.
  • H2, Cl2: single bond; O2: double bond; N2: triple bond.
Quick checkHow many electron pairs are shared in a nitrogen molecule, and why?Show answer

Three. Each nitrogen atom (2, 5) needs 3 more electrons, so the two atoms share three pairs: a triple bond, N≡N.

6Naming covalent compounds

  • The first element keeps its name; the second element’s name ends in -ide.
  • Prefixes give the number of atoms: mono- (1), di- (2), tri- (3), tetra- (4), penta- (5), hexa- (6).
  • Mono- is usually left out for the first element but used for the second.
  • If a prefix ends in “o” or “a” and the element name starts with a vowel, drop the last vowel: monoxide, pentoxide (but dioxide, trioxide keep the “i”).
  • No prefix is put before hydrogen when it comes first: H2S is hydrogen sulphide.
FormulaNameFormulaName
COcarbon monoxideSF6sulphur hexafluoride
CO2carbon dioxideN2O4dinitrogen tetroxide
CS2carbon disulphideN2O5dinitrogen pentoxide
PCl3phosphorus trichlorideH2Shydrogen sulphide
  • Some keep their common names: H2O is water, NH3 is ammonia.

Remember

  • Second element ends in -ide; prefixes count the atoms; mono- is left off the first element.
Quick checkName NO2 and PCl5.Show answer

NO2: nitrogen dioxide. PCl5: phosphorus pentachloride.

7Ionic bonds: transferring electrons

Atoms with fewer than 4 valence electrons usually lose them; atoms with more than 4 usually gain (or share) electrons.

Ions

Charged particles formed when atoms lose or gain electrons. A positive ion is a cation; a negative ion is an anion.

A sodium atom, 2, 8, 1, loses its one outer electron and becomes a sodium ion, Na plus, with configuration 2, 8.Sodium atom, Na2, 8, 1loses 1 electronSodium ion, Na+​2, 8+
Figure 7. Sodium (11 protons) loses one electron: 10 electrons are left, so the ion has a charge of +1.
A chlorine atom, 2, 8, 7, gains one electron and becomes a chloride ion, Cl minus, with configuration 2, 8, 8.Chlorine atom, Cl2, 8, 7gains 1 electronChloride ion, Cl−​2, 8, 8−
Figure 8. Chlorine (17 protons) gains one electron: 18 electrons, so the ion has a charge of −1.

Ionic bond

The electrostatic force of attraction between oppositely charged ions.

Sodium gives its one outer electron to chlorine. Sodium becomes the sodium ion and chlorine becomes the chloride ion; their opposite charges attract, forming sodium chloride.Na+ClNa+​+[Cl]−NaClSodium gives its outer electron (blue) to chlorine;the oppositely charged ions attract: an ionic bond.
Figure 9. Formation of sodium chloride by transfer of an electron.
  • Ionic compounds do not form separate molecules. Their ions are arranged in a regular, repeating 3-D pattern, a crystal: in sodium chloride, each Na+ is surrounded by six Cl− and each Cl− by six Na+.
  • Sulphur (2, 8, 6) gains two electrons to become the sulphide ion, S2−.
A sulphur atom, 2, 8, 6, gains two electrons to become a sulphide ion, S two minus.Sulphur atom, S2, 8, 6gains 2 electronsSulphide ion, S2−​2, 8, 82−
Figure 10. A sulphur atom gains two electrons to become a sulphide ion.

Remember

  • Metals lose electrons: cations. Non-metals gain electrons: anions.
  • Ionic bond = attraction between opposite charges.
Quick checkWhat ion does oxygen (2, 6) form?Show answer

It gains 2 electrons to reach 2, 8: the oxide ion, O2−, an anion.

8Common ions and naming ionic compounds

  • The cation is named first, then the anion: sodium chloride, calcium oxide, magnesium sulphide.
  • Simple anions end in -ide (chloride, oxide, sulphide).
  • Polyatomic ions are groups of atoms carrying a charge, such as sulphate and nitrate; their names usually do not end in -ide (hydroxide is an exception).
CationFormulaValencyAnionFormulaValency
SodiumNa+1FluorideF−1
PotassiumK+1ChlorideCl−1
SilverAg+1BromideBr−1
Copper (cuprous)Cu+1IodideI−1
CalciumCa2+2OxideO2−2
MagnesiumMg2+2SulphideS2−2
ZincZn2+2HydroxideOH−1
Copper (cupric)Cu2+2NitrateNO3−1
Iron (ferrous)Fe2+2HydrogencarbonateHCO3−1
Iron (ferric)Fe3+3CarbonateCO32−2
AluminiumAl3+3SulphateSO42−2
AmmoniumNH4+1PhosphatePO43−3

Remember

  • Name the cation first, then the anion.
  • The valency of an ion is the size of its charge.
Quick checkName the compound formed from K+ and SO42−.Show answer

Potassium sulphate, K2SO4.

9Writing chemical formulae

Covalent compounds

  • Write the symbols, write each valency below, then cross over the valencies as subscripts. A subscript 1 is not written.
  • H (1) and Cl (1): HCl. H (1) and S (2): H2S. C (4) and Cl (1): CCl4.

Ionic compounds: the criss-cross method

  1. Write the cation first, then the anion.
  2. Write the charges below the symbols.
  3. Cross over the numbers of the charges (not the signs) as subscripts.
  4. Divide by any common factor to get the simplest ratio.
Criss-cross method: the numbers of the charges are crossed over to become the subscripts, giving the formula. CaCl2+1−SymbolChargeFormula:CaCl2​
Figure 11. Calcium chloride: one Ca2+ for every two Cl−.
Criss-cross method: the numbers of the charges are crossed over to become the subscripts, giving the formula. AlO3+2−SymbolChargeFormula:Al2​O3​
Figure 12. Aluminium oxide: Al2O3.
Criss-cross method: the numbers of the charges are crossed over to become the subscripts, giving the formula. Mg2​O2​ simplifies to MgOMgO2+2−SymbolChargeFormula:MgOMg2​O2​ simplifies to MgO
Figure 13. Magnesium oxide: equal valencies, so MgO.
  • The charges are not shown in the final formula; the total positive and negative charges balance.
  • Use brackets for two or more polyatomic ions of the same kind: Mg(OH)2, Al(OH)3 (not AlOH3), Al2(SO4)3.
  • No brackets when there is only one: CaCO3 (from Ca2(CO3)2, simplified).

Remember

  • Cross the charge numbers, simplify, and bracket multiple polyatomic ions.
Quick checkWrite the formula of ferric hydroxide.Show answer

Fe3+ and OH−: cross over to get Fe(OH)3.

10Properties of ionic and covalent compounds

Activity 9.4

Camphor, sodium chloride, copper sulphate, sugar and naphthalene are tested for solubility in water, kerosene and petrol, and for electrical conductivity.

Testing electrical conductivity. Two electrodes held in a cardboard lid dip into the solution in a beaker. They are connected in a circuit with a 9 volt battery and a bulb. If the bulb glows, the solution conducts electricity.9 VCardboardElectrodesSolutionBulbBattery
Figure 14. Testing whether a solution conducts electricity.

Safety first

Use only a low-voltage (9 V) battery and do not touch the electrodes while connected. Petrol and kerosene catch fire easily: keep them away from flames.

CompoundWaterKerosene / petrolConducts (solid)Conducts (in water)Type
Sodium chlorideSolubleInsolubleNoYesIonic
Copper sulphateSolubleInsolubleNoYesIonic
SugarSolubleInsolubleNoNoCovalent
CamphorInsolubleSolubleNoDoes not dissolveCovalent
NaphthaleneInsolubleSolubleNoDoes not dissolveCovalent
PropertyIonic compoundsCovalent compounds
SolubilityUsually soluble in water; insoluble in kerosene and petrolMost insoluble in water; soluble in kerosene and petrol
Conduct when solid?No: ions are held in fixed positionsNo
Conduct when dissolved or molten?Yes: the ions are free to moveNo: there are no ions
Melting and boiling pointsHigh (strong attraction between ions)Low

Remember

  • Ionic: conduct when dissolved or molten, not when solid; high melting points.
  • Covalent: do not conduct; usually low melting points.
Quick checkSugar dissolves in water, but the solution does not conduct. Why?Show answer

Sugar is covalent: it dissolves as whole molecules, not as ions, so there are no charged particles to carry the current.

11Molecular mass and formula unit mass

Molecular mass

The sum of the atomic masses of all the atoms in a molecule (for covalent compounds).

Worked example 4

Find the molecular mass of ammonia, NH3 (N = 14 u, H = 1 u).

Given
N = 14 uH = 1 u
Find
molecular mass

Solution

NH3=(14 u × 1) + (1 u × 3)=17 u

The molecular mass of ammonia is 17 u.

Worked example 5

Find the molecular mass of sulphuric acid, H2SO4 (H = 1 u, S = 32 u, O = 16 u).

Given
H = 1 u, S = 32 u, O = 16 u
Find
molecular mass

Solution

H2SO4=(1 × 2) + (32 × 1) + (16 × 4) u=98 u

The molecular mass is 98 u.

Formula unit mass

Ionic compounds do not form molecules. The simplest whole-number ratio of their ions is a formula unit, and its mass is the formula unit mass.

Worked example 6

Find the formula unit mass of calcium chloride, CaCl2 (Ca = 40 u, Cl = 35.5 u).

Given
Ca = 40 uCl = 35.5 u
Find
formula unit mass

Solution

CaCl2=(40 u × 1) + (35.5 u × 2)=111 u

The formula unit mass is 111 u.

Worked example 7

Find the formula unit mass of aluminium sulphate, Al2(SO4)3 (Al = 27 u, S = 32 u, O = 16 u).

Given
Al = 27 u, S = 32 u, O = 16 u
Find
formula unit mass

Solution

SO4=32 + (16 × 4) = 96 uAl2(SO4)3=(27 × 2) + (96 × 3) u=342 u

The formula unit mass is 342 u.

Remember

  • Add up the atomic masses, multiplying each by the number of its atoms.
  • For a bracket, multiply everything inside by the number outside.
Quick checkFind the formula unit mass of Na2O (Na = 23 u, O = 16 u).Show answer
Na2O=(23 × 2) + 16 u=62 u
Test yourselfTake the 25-question practice quiz on this chapter.