How to describe motion in a straight line with numbers, equations and graphs: position and the reference point, distance and displacement, average speed and velocity, acceleration, position-time and velocity-time graphs, the three kinematic equations, stopping distance, and uniform circular motion.
Complete answers to every question in this chapter of the NCERT textbook: the questions in Activities 4.1 to 4.5, Think It Over and the questions in the text, the five Pause and Ponder questions, all sixteen Revise, Reflect, Refine exercises and The Journey Beyond. Each question is given exactly as it appears in the book.
Activities 4.1 to 4.5
Questions in the activities
Q1
Activity 4.1: Let us analyse As shown in Fig. 4.5, a ball is thrown vertically upwards from O. It moves up straight till B and then falls back to O. Can this be considered a motion in a straight line?
Answer
Yes. The ball goes up and comes down along the same vertical straight line. It only changes its direction (up, then down) along that line, so it is motion in a straight line (in one dimension).
The ball goes up to B (140 cm) and falls back to O along one vertical line.
Q2
For this motion, fill up the values in Table 4.1.
Answer
Take O (0 cm) as the origin and upwards as positive. On the way down the ball passes C at 80 cm, so from B it has fallen 140 cm − 80 cm = 60 cm.
Position
Total distance travelled by the ball from O till that position
Displacement of the ball from O till that position
O
0 cm
0 cm
A
40 cm
40 cm in upward direction
B
140 cm
140 cm in upward direction
C
140 cm + 60 cm = 200 cm
80 cm in upward direction
O
140 cm + 140 cm = 280 cm
0 cm
Q3
Analyse the data filled in Table 4.1 and choose which of the following is true for displacement:(i) It is never zero.(ii) Its magnitude can be greater than the total distance travelled.(iii) Its magnitude is less than or equal to the total distance travelled.(iv) Its magnitude is less than the total distance travelled in all cases.
Answer
(iii) Its magnitude is less than or equal to the total distance travelled.
(i) is false: the displacement is 0 cm at the start and again when the ball is back at O.
(ii) is false: in every row the displacement is at most the distance.
(iv) is false: at A and B (going up without turning back) the two are equal.
Q4
Activity 4.2: Let us calculate 1. The magnitude of average acceleration of cars is generally specified as the time taken by the car to go from 0 km h–1 to 100 km h–1. Look it up on the internet and find this time for various cars, and record those in Table 4.2.2. Calculate the magnitude of average acceleration for each car.
Answer
First change 100 km h−1 to m s−1:
=100 × 1000 m3600 s=27.7778 m s−1
So 100 km h−1 ≈ 27.8 m s−1. For a car starting from rest that takes time t:
a=27.8 m s−1 − 0t
The times you find will depend on the cars you look up. With some typical values:
Car type
Time interval during which the speed goes from 0 to 100 km h−1
Magnitude of average acceleration (m s−2)
Small family car
14 s
27.814 ≈ 2.0
Mid-size car
10 s
27.810 ≈ 2.8
Sports car
4 s
27.84 ≈ 7.0
The shorter the time to reach 100 km h−1, the larger the average acceleration.
Q5
Activity 4.3: Let us plot a graph (Plot a position-time graph for the vehicle using the data of Table 4.3: 0 m at 0 s, 20 m at 1 s, 40 m at 2 s, 60 m at 3 s, 80 m at 4 s, 100 m at 5 s and 120 m at 6 s.) Refer to Table 4.3. We need to decide which quantity (time or position) to be shown along each axis.
Answer
Show time on the X-axis (the quantity we choose) and position on the Y-axis (the quantity that depends on time), each with its unit.
Plot (0 s, 0 m), (1 s, 20 m), (2 s, 40 m) … (6 s, 120 m) and join them.
The points lie on a straight line through the origin.
The graph is a straight line: the vehicle covers 20 m every second, so it moves with a constant velocity.
Q6
Activity 4.4: Let us calculate (In the position-time graph of Fig. 4.11c, lines parallel to the axes are drawn from two points A and B on the graph.) Extend the horizontal line from A and a triangle ABC is formed. What do the sides BC and CA of the triangle represent?
Answer
BC (vertical side) is the change in position, s2 − s1.
CA (horizontal side) is the change in time (the time interval), t2 − t1.
A at (2 s, 40 m) and B at (4 s, 80 m).
v=BCCA=80 m − 40 m4 s − 2 s=40 m2 s=20 m s−1
So BC divided by CA, the slope of AB, is the average velocity: 20 m s−1.
Q7
Activity 4.5: Let us investigate (A marble is set rolling round the inside of a ring placed flat on a smooth surface.) Predict what will happen if you lift the ring while the marble is moving.
Answer
Prediction: once the ring is lifted, nothing turns the marble any more, so it will stop going round and will roll off in a straight line, in the direction it was moving at that instant.
Q8
Now, after one or two complete revolutions of the marble, pick up the ring without disturbing the motion of the marble. What do you observe? Does the marble continue moving in a circular motion? Or does it move in some other manner?
Answer
The marble does not continue in a circle. It moves off in a straight line, along the tangent to the circle at the point where it was when the ring was lifted.
Released at the top, the marble moves straight on along the tangent.
Q9
When the marble is released by lifting the ring, it moves in a straight line. Why does this happen?
Answer
While it goes round, the marble’s velocity at every instant is along the tangent to the circle. The ring pushes on it all the time and keeps changing the direction of its motion. When the ring is lifted, nothing changes its direction any more, so the marble continues to move in the direction it had at that instant: in a straight line along the tangent. (The reason, the effect of forces on motion, is studied in a later chapter.)
Think It Over and the questions in the text
In-text questions
Q1
Think It Over How much distance should we maintain from the truck ahead to avoid a collision if it suddenly applies the brakes?
Answer
At least our stopping distance: the distance our car covers from the moment we see the truck brake until our car stops.
For example, at 20 m s−1 (72 km h−1), with a reaction time of 1 s and brakes giving 5 m s−2, it is 20 m + 40 m = 60 m. A wet road, worn tyres or a slow reaction need an even larger gap.
Q2
Does this distance depend upon the speed with which we are moving?
Answer
Yes, strongly. The reaction distance is proportional to the speed, and the braking distance to the square of the speed. Doubling the speed doubles the reaction distance and makes the braking distance four times as long. So the faster we move, the bigger the gap we must keep.
Q3
But how do we study the wide variety of complex motions around us?
Answer
Scientists first study complex motions in idealised, simplified forms: motion in a straight line, uniform circular motion and oscillatory motion. They describe these with a few physical quantities (position, distance, displacement, speed, velocity, acceleration), with equations and with graphs, and then build up to real motions.
Q4
How do we describe the position of an object?
Answer
First choose a fixed reference point (the origin). The position of the object at an instant is its distance and direction from the reference point. On a straight line, the direction is shown by a sign: positions to the right of the origin are usually positive and those to the left negative.
Q5
And when do we say that an object is in motion?
Answer
When its position with respect to the reference point changes with time. If the position does not change with time, the object is at rest.
Q6
(An athlete starts at O at t = 0 s, reaches B at t = 4 s, reaches A at t = 10 s and runs back to B at t = 16 s.) How much is the total distance travelled by the athlete between the starting and stopping positions?
Answer
total distance=OA + AB=100 m + 60 m=160 m
Distance travelled 160 m; displacement 40 m in the positive direction.
Q7
(Total distance travelled and magnitude of displacement) Can these quantities ever be equal?
Answer
Yes, when the object moves along a straight line in one direction only, without turning back. For example, between 0 s and 10 s the athlete runs straight from O to A: distance = 100 m and displacement = 100 m. Once she turns back, the distance becomes greater than the magnitude of displacement.
Q8
But how can you describe how fast or slow an object is moving?
Answer
By its speed: the distance travelled divided by the time taken. The average speed over a time interval is total distance travelledtime interval. To say also in which direction it moves, we use velocity: displacementtime interval.
Q9
How do we associate direction with velocity when the motion is in a straight line?
Answer
The direction of velocity is the same as the direction of the displacement. In a straight line it is shown by a + or − sign: + for motion in the chosen positive direction (usually to the right), − for motion the other way.
Q10
How can we express the change in velocity of an object?
Answer
By its acceleration, the change in velocity divided by the time interval in which it happens:
average acceleration=final velocity − initial velocitytime intervala=v − ut
Its SI unit is m s−2. It is positive (along the velocity) when an object speeds up and negative when it slows down.
Q11
What does the shape of the position-time graph indicate about the nature of motion?
Answer
Shape
Nature of motion
Straight line parallel to the time axis
At rest
Straight sloping line
Constant velocity (uniform motion): equal displacements in equal times
Curve
Velocity changing (accelerated, non-uniform motion): steeper and steeper when speeding up
Q12
Which physical quantities can be obtained from a position-time graph?
Answer
The position of the object at each instant (read directly).
The displacement between two instants (difference of the positions).
The velocity: the slope of the graph, change in positionchange in time.
Q13
What does the shape of the velocity-time graph indicate about the nature of motion?
Answer
Shape
Nature of motion
Straight line parallel to the time axis
Constant velocity; acceleration zero
Straight line sloping up
Velocity increasing by equal amounts in equal times: constant acceleration in the direction of velocity
Straight line sloping down
Velocity decreasing by equal amounts in equal times: constant acceleration opposite to the velocity
Q14
Which physical quantities can be obtained from a velocity-time graph?
Answer
The velocity at each instant (read directly).
The acceleration: the slope of the graph, change in velocitychange in time.
The displacement: the area between the graph and the time axis.
Q15
(Parts of the velocity-time graphs between the line and the time axis are shaded.) Does the area of the shaded part represent some physical quantity?
Answer
Yes: the displacement in that time interval. For a constant velocity the area is a rectangle, velocity × time, which is the displacement.
The shaded areas are 120 m and 50 m + 25 m = 75 m: the displacements.
area (a)=20 m s−1 × 6 s=120 marea (b)=(5 m s−1 × 10 s) + (12 × 10 s × 5 m s−1)=75 m
Q16
(A child on a merry-go-round moves from A to B to C along a circle, as in Fig. 4.22.) What is the distance travelled by the child? What is their displacement from their original position?
Answer
The distance travelled is the length of the curved path, the arc ABC. The displacement is the straight line AC, from A towards C. The two are not equal: the arc is longer. For a quarter turn of radius R, the arc is 2πR4 and the chord AC is about 1.41R.
Distance: the arc ABC. Displacement: the straight line AC.
Q17
What is the distance travelled by the child in making one revolution (going round the circle once)?
Answer
One full round is the circumference of the circle: 2πR, where R is the radius. The displacement after one revolution is zero, because the child is back at the starting point.
Q18
In case of uniform circular motion, the speed is constant but what about the direction of velocity at an instant? Is it changing?
Answer
Yes, it changes continuously. At every point the velocity is along the tangent to the circle, and the tangent points a different way at every point. So even though the speed stays the same, the velocity keeps changing, and uniform circular motion is accelerated motion.
Q19
(An athlete runs round a rectangular track, then a hexagonal track, at a uniform speed.) What happens if we go on increasing the number of sides indefinitely?
Answer
The athlete has to turn more and more often, through smaller angles. As the number of sides grows without limit, each side shrinks to a point, the track becomes a circle, and the direction of the velocity changes continuously.
Four turns, six turns, then turning all the time.
Q20
Bridging Science and Society Can you now understand why it is important to maintain a safe distance from the vehicle moving ahead of your vehicle (Fig. 4.20) and how this distance needs to be adjusted given your initial velocity?
Answer
A moving vehicle cannot stop at once. In the driver’s reaction time it goes on at full speed, and after the brakes are pressed it still covers the braking distance u22a. If the gap to the vehicle ahead is less than this stopping distance, a sudden stop ahead leads to a collision.
At 20 m s⁻¹: 20 m while reacting plus 40 m while braking.
Since the braking distance grows with the square of the initial velocity, the gap must be increased a lot at higher speeds: at twice the speed, the braking distance is four times as long. It must be increased further on wet roads, with worn tyres, in fog or at night.
Pause and Ponder 1 to 5
Pause and Ponder
Q1
In the example of an athlete running back and forth on a straight track (Fig. 4.4), when will the displacement of the athlete be zero? What will be the total distance travelled in that case?
Answer
The displacement is zero when the athlete comes back to her starting point O. If she runs from O to A (100 m) and back to O:
total distance=OA + AO=100 m + 100 m=200 mdisplacement=0 m
Q2
Fuel used up in a vehicle depends on which of the following? Justify your answer.(i) Total distance travelled(ii) Displacement
Answer
(i) Total distance travelled.
The engine burns fuel to move the vehicle along every metre of its path, whatever the direction. A car that goes 10 km to a market and 10 km back uses fuel for 20 km, although its displacement is zero.
Q3
A ball rolls down an inclined track as shown in Fig. 4.6. Is its motion, a straight line motion? Assuming the starting point of the ball (O) to be the origin, can its motion from O to D be depicted using a horizontal line as shown in Fig. 4.3? Are the values of total distance travelled and magnitude of displacement from O equal or different at positions A, B, C and D?
Answer
The ball rolls down the straight track: OA = 40 cm, AB = 10 cm, BC = 20 cm, CD = 30 cm.
Yes, it is a straight line motion: the track is straight, so the ball moves along a single straight line (a sloping one).
Yes, it can be shown on a straight line marked in centimetres with O at 0, like Fig. 4.3. The line is simply drawn along the track; a straight line can be drawn in any direction, so it may be shown horizontal.
The ball never turns back, so at each position the distance and the magnitude of displacement are equal:
Position
Distance from O
Displacement from O
A
40 cm
40 cm down the track
B
40 cm + 10 cm = 50 cm
50 cm down the track
C
50 cm + 20 cm = 70 cm
70 cm down the track
D
70 cm + 30 cm = 100 cm
100 cm down the track
Q4
During a family road trip, you drive 200 km north in three hours. Afterwards, you drive 200 km south in two hours. Find the average speed and average velocity for your entire trip.
Answer
Total distance = 200 km + 200 km = 400 km; total time = 3 h + 2 h = 5 h. You end where you started, so the displacement is 0.
average speed=total distancetotal time=400 km5 h=80 km h−1average velocity=displacementtotal time=0 km5 h=0 km h−1
Average speed 80 km h−1 (about 22.2 m s−1); average velocity zero.
Q5
Under what condition(s) is the(i) magnitude of average velocity of an object equal to its average speed?(ii) magnitude of average velocity of an object zero while its average speed is not zero?
Answer
(i) When the object moves along a straight line in one direction only, without turning back. Then the distance travelled equals the magnitude of the displacement.
(ii) When the object has moved but returns to its starting point at the end of the interval (a round trip, or one full revolution of a circle). The displacement is zero, but the distance travelled is not.
Revise, Reflect, Refine
Revise, Reflect, Refine
Q1
My father went to a shop from home which is located at a distance of 250 m on a straight road. On reaching there, he discovered that he forgot to carry a cloth bag. He came home to take it, went to the shop again, bought provisions and came back home. How much was the total distance travelled by him? What was his displacement from home?
Answer
He made the 250 m trip four times: home to shop, shop to home, home to shop, shop to home.
total distance=250 m × 4=1000 m (1 km)
He ended at home, where he started, so his displacement from home is zero.
Q2
A student runs from the ground floor to the fourth floor of a school building to collect a book and then comes down to their classroom on the second floor. If the height of each floor is 3 m, find:(i) the total vertical distance travelled, and(ii) their displacement from the starting point.
Answer
Ground floor to fourth floor = 4 floors up; fourth floor to second floor = 2 floors down.
distance up=4 × 3 m=12 mdistance down=2 × 3 m=6 m(i) total distance=12 m + 6 m=18 m(ii) displacement=12 m − 6 m=6 m upwards
The student ends on the second floor, 2 × 3 m = 6 m above the ground floor: a displacement of 6 m vertically upwards.
Q3
A girl is riding her scooter and finds that its speedometer reading is constant. Is it possible for her scooter to be accelerating and if so, how?
Answer
Yes. The speedometer shows only the speed (the magnitude of velocity). Velocity also has a direction. If she rides round a curve or a circular road at a steady speed, the direction of her velocity changes continuously, so the velocity changes and the scooter is accelerating (as in uniform circular motion). Only on a straight road at a constant speedometer reading is the acceleration zero.
Q4
A car starts from rest and its velocity reaches 24 m s–1 in 6 s. Find the average acceleration and the distance travelled in these 6 s.
Answer
Given: u = 0, v = 24 m s−1, t = 6 s.
a=v − ut=24 m s−1 − 06 s=4 m s−2s=ut + 12at2=0 + 12 × 4 m s−2 × (6 s)2=72 m
Average acceleration 4 m s−2; distance travelled 72 m. (Check: s = 12(u + v)t = ½ × 24 m s−1 × 6 s = 72 m.)
Q5
A motorbike moving with initial velocity 28 m s–1 and constant acceleration stops after travelling 98 m. Find the acceleration of the motorbike and the time taken to come to a stop.
Answer
Given: u = 28 m s−1, v = 0, s = 98 m.
v2=u2 + 2as0=(28 m s−1)2 + 2 × a × 98 ma=−784 m2 s−2196 m=−4 m s−2t=v − ua=0 − 28 m s−1−4 m s−2=7 s
The acceleration is −4 m s−2 (4 m s−2 opposite to the motion) and the motorbike stops in 7 s.
Q6
Fig. 4.27 shows a position-time graph of two objects A and B that are moving along the parallel tracks in the same direction. Do objects A and B ever have equal velocity? Justify your answer.Fig. 4.27
Answer
No. Both graphs are straight lines, so each object moves with a constant velocity, equal to the slope of its line. The line for A is steeper than the line for B all the time, so A always has the greater velocity; their velocities are never equal.
At 5 s the lines cross: there the two objects have the same position (A catches up with and passes B), not the same velocity.
Q7
A graph in Fig. 4.28 shows the change in position with time for two objects A and B moving in a straight line from 0 to 10 seconds. Choose the correct option(s).Fig. 4.28(i) The average velocity of both over the 10 s time interval is equal since they have the same initial and final positions.(ii) The average speeds of both over the 10 s time interval are equal since both cover equal distance in equal time.(iii) The average speed of A over the 10 s time interval is lower than that of B since it covers a shorter distance than B in 10 seconds.(iv) The average speed of A over the 10 s time interval is greater than that of B since B’s speed is lower than A’s in some segments.
Answer
Options (i) and (ii) are correct.
(i) Correct. Both start at the same position and end at the same position at 10 s, so they have the same displacement in the same time, and so the same average velocity.
(ii) Correct. Both graphs always slope upwards, so neither object turns back. For motion in one direction, distance = magnitude of displacement, so both cover the same distance in 10 s and have equal average speeds.
(iii) Wrong. A does not cover a shorter distance; the distances are equal.
(iv) Wrong. B is slower than A at first but faster later (its last part is steeper). The average over the whole interval is the same for both.
Q8
A truck driver driving at the speed of 54 km h–1 notices a road sign with a speed limit of 40 km h–1 (Fig. 4.29) for trucks. He slows down to 36 km h–1 in 36 s. What was the distance travelled by him during this time? Assume the acceleration to be constant while slowing down.
Answer
Change the speeds to m s−1:
u=54 × 518 m s−1=15 m s−1v=36 × 518 m s−1=10 m s−1
With constant acceleration, use s = 12(u + v)t:
s=12 × (15 m s−1 + 10 m s−1) × 36 s=12 × 25 m s−1 × 36 s=450 m
The truck travels 450 m while slowing down. (Its acceleration is 10 − 1536 m s−2 ≈ −0.14 m s−2; s = ut + ½at2 gives the same 450 m.)
Q9
A car starts from rest and accelerates uniformly to 20 m s–1 in 5 seconds. It then travels at 20 m s–1 for 10 seconds and finally applies the brake (with uniform acceleration) to stop in 6 seconds. Find the total distance travelled.
Answer
Take the three stages separately (or find the area under the velocity-time graph).
stage 1=12 × (0 + 20) m s−1 × 5 s=50 mstage 2=20 m s−1 × 10 s=200 mstage 3=12 × (20 + 0) m s−1 × 6 s=60 mtotal distance=50 m + 200 m + 60 m=310 m
The area under the velocity-time graph: 50 m + 200 m + 60 m = 310 m.
Q10
A bus is travelling at 36 km h–1 when the driver sees an obstacle 30 m ahead. The driver takes 0.5 seconds to react before pressing the brake. Once the brake is applied, the velocity of the bus reduces with constant acceleration of 2.5 m s–2. Will the bus be able to stop before reaching the obstacle?
Answer
u = 36 × 518 m s−1 = 10 m s−1. The bus slows down, so a = −2.5 m s−2.
reaction distance=10 m s−1 × 0.5 s=5 mbraking: v2=u2 + 2as0=(10 m s−1)2 + 2 × (−2.5 m s−2) × ss=100 m2 s−25 m s−2=20 mstopping distance=5 m + 20 m=25 m
25 m is less than 30 m, so yes, the bus stops 5 m before the obstacle.
Q11
A student said, “The Earth moves around the Sun”. In this context, discuss whether an object kept on the Earth can be considered to be at rest.
Answer
Rest and motion are always with respect to a reference point.
Taking a point on the Earth (such as the corner of the room) as the reference, the object’s position does not change with time: it is at rest.
Taking the Sun as the reference, the object moves with the Earth around the Sun (and with the Earth’s spin): its position keeps changing, so it is in motion.
So the object can be considered at rest only with respect to the Earth. For everyday motion on the Earth we normally choose a reference point on the Earth.
Q12
The velocity-time graph from 0 s to 120 s for a cyclist is shown in Fig. 4.30. Shade the areas (in different colours) representing the displacement of the cyclistFig. 4.30(i) while cyclist is moving with constant velocity.(ii) when the velocity of cyclist is decreasing.Also, calculate the displacement and average acceleration in the 120 s time interval.
Answer
From the graph: the velocity rises from 0 to 3 m s−1 in the first 20 s, stays at 3 m s−1 from 20 s to 100 s, and falls to 2 m s−1 at 120 s.
(i) Constant velocity, 20 s to 100 s: shaded yellow. (ii) Decreasing velocity, 100 s to 120 s: shaded blue.
0 s to 20 s (triangle)=12 × 20 s × 3 m s−1=30 m(i) 20 s to 100 s (rectangle)=3 m s−1 × 80 s=240 m(ii) 100 s to 120 s (trapezium)=12 × (3 + 2) m s−1 × 20 s=50 mtotal displacement=30 m + 240 m + 50 m=320 m
average acceleration=final velocity − initial velocitytime interval=2 m s−1 − 0120 s=160 m s−2≈0.017 m s−2
Displacement in 120 s: 320 m. Average acceleration: about 0.017 m s−2, in the direction of motion.
Q13
A girl is preparing for her first marathon by running on a straight road. She uses a smartwatch to calculate her running speed at different intervals. The graph (Fig. 4.31) depicts her velocity versus time. Estimate the distance she ran based on the graph.Fig. 4.31
Answer
The distance is the area under the velocity-time graph. Here velocity is in km h−1 and time in h, so the area comes out in km. Reading the graph (one small square = 0.2 h across): 7 km h−1 from 0 to 0.6 h, rising to 7.5 km h−1 at 1.6 h, steady until 3.0 h, falling to 7 km h−1 at 4.6 h and 6.5 km h−1 at 5.6 h, then steady until 6.6 h.
The shaded area under the graph is the distance run.
She ran about 47 km (an estimate: the readings from the graph are approximate). As a check, her velocity stays close to 7 km h−1 for about 6.6 h: 7 × 6.6 ≈ 46 km.
Q14
On entering a state highway, a car continues to move with a constant velocity of 6 m s–1 for 2 minutes and then accelerates with a constant acceleration 1 m s–2 for 6 seconds. Find the displacement of the car on the state highway in the 2 min 6 s time interval by drawing a velocity-time graph for its motion.
Answer
2 min = 120 s. At the end, v = u + at = 6 + 1 × 6 = 12 m s−1.
Velocity-time graph (time axis not to scale): a rectangle, then a trapezium.
0 s to 120 s is a rectangle; 120 s to 126 s is a trapezium with parallel sides 6 m s−1 and 12 m s−1.
rectangle=6 m s−1 × 120 s=720 mtrapezium=12 × (6 + 12) m s−1 × 6 s=54 mdisplacement=720 m + 54 m=774 m
The displacement in 2 min 6 s is 774 m along the highway. (Check for the last part: s = ut + ½at2 = 36 m + 18 m = 54 m.)
Q15
Two cars A and B start moving with a constant acceleration from rest, in a straight line. Car A attains a velocity of 5 m s–1 in 5 s. Car B attains a velocity of 3 m s–1 in 10 s. Plot the velocity-time graphs for both the cars in the same graph. Using the graph, calculate the displacement in the two time intervals mentioned (Hint: Calculate the acceleration in both cases. Then calculate their velocities at five instants of time to plot the graph).
Answer
a (car A)=5 m s−1 − 05 s=1 m s−2a (car B)=3 m s−1 − 010 s=0.3 m s−2
Velocities at five instants (v = at, starting from rest):
Car A: time (s)
1
2
3
4
5
Velocity (m s−1)
1
2
3
4
5
Car B: time (s)
2
4
6
8
10
Velocity (m s−1)
0.6
1.2
1.8
2.4
3.0
Both graphs are straight lines through the origin; the areas under them are the displacements.
car A, 0 to 5 s=12 × 5 s × 5 m s−1=12.5 mcar B, 0 to 10 s=12 × 10 s × 3 m s−1=15 m
Car A moves 12.5 m in 5 s; car B moves 15 m in 10 s.
Q16
Rohan studies science from 6 PM to 7:30 PM at home. Consider the tip of the minute’s hand of the wall clock. During the given time interval, what is its:(i) distance travelled,(ii) displacement,(iii) speed, and(iv) velocity.The length of the minute’s hand is 7 cm (Fig. 4.32).
Answer
The tip moves on a circle of radius R = 7 cm and makes one round in T = 60 min = 3600 s. From 6 PM to 7:30 PM (1.5 h = 5400 s) it makes 1½ rounds, from 12 round to 12 and on to 6. Take π = 227.
At 6 PM the tip is at 12; at 7:30 PM it is at 6, a diameter away.
one round=2πR=2 × 227 × 7 cm=44 cm(i) distance=1.5 × 44 cm=66 cm
(ii) The tip goes from 12 to 6: the displacement is the diameter, 2 × 7 cm = 14 cm, directed from the 12 towards the 6 (vertically downwards on the clock face).
(iii) speed=2πRT=44 cm3600 s≈0.0122 cm s−1≈1.22 × 10−4 m s−1
The speed is constant, so this is also the average speed: 66 cm5400 s ≈ 0.0122 cm s−1.
(iv) average velocity=displacementtime interval=14 cm5400 s≈0.0026 cm s−1≈2.6 × 10−5 m s−1
The average velocity is about 0.0026 cm s−1 from the 12 towards the 6. The velocity at any instant has the same magnitude as the speed, 0.0122 cm s−1, but its direction (along the tangent) keeps changing; at 7:30 PM the tip is at the 6 moving clockwise, so its velocity points towards the 7 (to the left).
The Journey Beyond
The Journey Beyond
Q1
Take a cardboard disc (radius ~ 8 cm) (Fig. 4.33). Write numbers 1 to 12 on the outer part (7 cm from the centre) and the letters ‘ABCDEF’ on the inner part (4 cm from the centre), using the same font size. Spin the disc slowly, then faster, and observe how the numbers and letters appear. Why do the numbers fade or disappear while the letters remain visible? Are the speeds of the numbers and letters the same or different? Justify your answer.
Answer
Numbers 7 cm from the centre, letters 4 cm from it.
Every point of the disc makes one round in the same timeT. But a number goes round a circle of radius 7 cm and a letter a circle of radius 4 cm, so the numbers cover a longer distance in the same time:
speed of a numberspeed of a letter=2π × 7 cmT × T2π × 4 cm=74
The speeds are different: the numbers move 74 (1.75) times as fast as the letters. When the disc spins fast, each number sweeps past so quickly that the eye cannot form a clear image of it, so it blurs and fades; the slower letters stay readable a little longer.
Q2
Many smartphones have an inbuilt accelerometer that can detect very small accelerations. Install an app, such as Phyphox (phyphox.org) and open ‘Accelerometer (without g)’. Note the readings when (i) the phone is on an outstretched palm, and (ii) the phone is kept on the floor. What differences do you observe? What does this tell you about motion and acceleration in real situations?
Answer
On the floor: the readings stay almost at zero (only tiny flickers from the sensor itself). The phone is at rest.
On an outstretched palm: the readings keep changing by small amounts, up and down, in all directions. A hand is never perfectly still: tiny, involuntary movements make the phone speed up and slow down all the time.
So in real situations objects that seem still often have small, changing accelerations. Perfect rest or perfectly uniform motion are idealisations; even very small changes in velocity can be measured.
Q3
For motion in a straight line with constant acceleration, we derived two primary equations given by Eq. (4.4a) and (4.4b). Using these two equations, three more equations can be derived, out of which we derived one given in Eq. (4.4c). Derive the remaining two equations given belows = vt − 12at2s = 12(u + v)tIn mathematics, you have learnt the formula for calculating the area of a trapezium. Using that formula, derive the second equation given above.
Answer
First equation. From v = u + at, u = v − at. Put this into s = ut + 12at2:
s=(v − at)t + 12at2=vt − at2 + 12at2s=vt − 12at2
Second equation (from the graph). The velocity-time graph is a straight line from u at time 0 to v at time t. The area under it, OABD, is a trapezium with parallel sides OA = u and BD = v and width OD = t. The area is the displacement:
The area under the graph, OABD, is a trapezium.
s=area of trapezium OABD=12 × (sum of parallel sides) × distance between them=12 × (OA + BD) × ODs=12(u + v)t
Q4
Plot graphs for data given in Table 4.4, using different X and Y scales, on different graph papers. Compare the graphs to find how the appearance of graph is affected by the choice of scales and decide which scale is better and why. Now repeat this with any graph plotting app. Such apps generally automatically adjust the axes to fit the data well on the screen.
Answer
The data (0 m, 1 m, 4 m, 9 m, 16 m, 25 m, 36 m at 0, 2, 4 … 12 s) always give the same curve: the position grows faster and faster. The scales change only its look:
A large Y scale (say 5 divisions = 20 m) squashes the graph into the bottom of the page: the curve looks almost flat and the small values (1 m, 4 m) are hard to read.
A large X scale stretches it sideways and it may not fit; too small a scale crowds the points together.
The best scale (for example X: 5 divisions = 2 s, Y: 5 divisions = 5 m, as in Fig. 4.12) uses most of the paper in both directions, is easy to count (1, 2, 5 or 10 units per division) and lets every value be read accurately.
Table 4.4 plotted with X: 5 divisions = 2 s and Y: 5 divisions = 5 m.
A graph-plotting app picks such scales automatically to fill the screen. Because the scales change the steepness you see, always read the numbers on the axes before comparing two graphs.
Q5
Talk to a motor mechanic about how a vehicle’s braking or stopping distance is affected by: (i) wet roads, (ii) worn-out tyres, (iii) higher vehicle mass, (iv) driving at night, (v) fog, (vi) severe weather (rain, snow, storm), and (vii) driver reaction time. Using this information, design safety posters for your school and prepare a short skit to present it in the assembly.
Answer
Factor
Effect on stopping distance
Why
(i) Wet roads
Longer
Less grip between tyres and road, so the brakes give a smaller deceleration
(ii) Worn-out tyres
Longer
Smooth tyres grip poorly, especially on wet roads
(iii) Higher vehicle mass
Longer
The same brakes slow a heavier vehicle less quickly
(iv) Driving at night
Longer
Dangers are seen later, so the driver reacts later
(v) Fog
Longer
Poor visibility delays the reaction; roads are often damp
(vi) Rain, snow, storm
Much longer
Slippery roads and poor visibility together
(vii) Driver reaction time
Longer when it is longer
Reaction distance = speed × reaction time (tiredness, phones and alcohol increase it)
Poster ideas: “Double the speed, four times the braking distance”; “Wet road? Double the gap”; “Eyes on the road: one second of distraction at 72 km h−1 is 20 m without braking”. A skit can show two drivers, one keeping a safe gap and one tailgating, when the vehicle ahead stops suddenly.