In this chapter 13 topics
- 1Motion in a straight line and position
- 2Distance travelled and displacement
- 3Average speed, uniform and non-uniform motion
- 4Average velocity, and speed versus velocity
- 5Average acceleration
- 6Plotting a position-time graph
- 7Reading position-time graphs
- 8Velocity-time graphs and acceleration
- 9Displacement from a velocity-time graph
- 10Kinematic equations (equations of motion)
- 11Stopping distance and safe driving
- 12Motion in a plane and uniform circular motion
- 13Solving numericals on motion
1Motion in a straight line and position
Motion in a straight line (linear motion)
Motion along a straight path. It is the simplest kind of motion.
- Examples: swimmers in their lanes, a ball falling straight down, a car on a straight stretch of highway, a train on a straight track.
- Other simple kinds of motion: circular (along a circle) and oscillatory (to and fro about a point, like a swing).
- Real motions are complex. Scientists first study them in idealised, simplified forms like these.
Describing position
Reference point (origin, O)
A fixed point chosen to measure positions from.
Position
The distance and direction of an object from the reference point, at an instant of time.
- On a straight line, an object can be on only one of two sides of O. The side is shown by a sign.
- Usually positions to the right of O are positive (+) and those to the left are negative (−).
Rest and motion
| At rest | In motion | |
|---|---|---|
| Meaning | Position does not change with time | Position changes with time |
| Measured from | A reference point | A reference point |
| Example | A book on a desk (from a corner of the room) | A car passing a lamp post (from the lamp post) |
- Rest and motion depend on the reference point. A passenger sitting in a moving train is at rest with respect to the train but in motion with respect to the platform.
- An object kept on the ground is at rest with respect to the Earth. But it moves with the Earth around the Sun, so it is in motion with respect to the Sun.
Instant and time interval
| Instant of time | Time interval | |
|---|---|---|
| Meaning | A single reading of a clock | The time between two instants (two clock readings) |
| Example | t = 4 s; 9:00 a.m. | From t = 4 s to t = 10 s: 6 s |
Remember
- Position = distance + direction from a fixed reference point.
- In a straight line, right of O is usually +, left of O is −.
- An object is in motion if its position changes with time; rest and motion depend on the reference point.
- An instant is one clock reading; a time interval is the time between two readings.
Quick checkA girl stands 30 m to the left of a lamp post taken as the origin. What is her position?Show answer
−30 m: a distance of 30 m, and the minus sign shows she is to the left of the origin.
2Distance travelled and displacement
Distance travelled
The total length of the path covered by an object. It has only a size (a number with a unit), no direction.
Displacement
The net change in position of an object between two instants. Its size is the straight-line distance between the two positions; its direction is from the first position towards the second.
- Displacement = final position − initial position. In a straight line its sign (+ or −) gives its direction.
- The magnitude of a quantity is its size: the number with its unit, without the direction.
- SI unit of both distance and displacement: the metre (m).
An athlete on a straight track
An athlete starts at O at t = 0 s, passes B at 4 s, reaches A at 10 s, and runs back to B at 16 s.
Distance and displacement compared
| Distance travelled | Displacement | |
|---|---|---|
| Meaning | Total length of the path | Change in position: shortest (straight-line) distance from start to finish, with direction |
| Direction | Not needed (a scalar) | Needed (a vector) |
| Can it be zero for a moving object? | No | Yes, when the object returns to its starting point |
| Can it be negative? | No | Yes, in a straight line (it points in the negative direction) |
| Depends on | The path followed | Only the first and last positions |
- Magnitude of displacement ≤ distance travelled, always.
- They are equal only when the object moves in a straight line in one direction, without turning back.
- The fuel a vehicle uses depends on the distance travelled, not on the displacement: the engine works all along the path.
Scalars and vectors
A scalar is fully given by its magnitude (number and unit): distance, speed, time, mass. A vector needs both magnitude and direction: displacement, velocity, acceleration. You will study vectors in higher classes.
Activity 4.1: a ball thrown straight up
A ball is thrown up from O, rises to B (140 cm) and falls back to O. It moves up and down along one vertical straight line, so this is motion in a straight line.
| Position | Total distance from O | Displacement from O |
|---|---|---|
| O (start) | 0 cm | 0 cm |
| A (going up) | 40 cm | 40 cm upwards |
| B (top) | 140 cm | 140 cm upwards |
| C (coming down) | 140 cm + 60 cm = 200 cm | 80 cm upwards |
| O (back) | 140 cm + 140 cm = 280 cm | 0 cm |
Result: the magnitude of displacement is less than or equal to the distance travelled. Displacement can be zero, and is never larger than the distance.
Remember
- Distance: total path length, no direction. Displacement: change in position, with direction.
- Magnitude of displacement ≤ distance; equal only for motion in one direction along a straight line.
- Displacement is zero whenever an object returns to its starting point.
- Both are measured in metres (m).
Quick checkA runner goes once round a 400 m track and stops at the starting line. Give the distance and the displacement.Show answer
Distance travelled = 400 m. Displacement = 0 m, because the final position is the same as the initial position.
3Average speed, uniform and non-uniform motion
Average speed
The total distance travelled divided by the time interval in which it is covered. It tells how fast or slow an object moves.
average speed = total distance travelledtime interval
- Distance has no direction, so speed has no direction either: it is a scalar.
- SI unit: metre per second (m s−1). Also used: kilometre per hour (km h−1).
Changing km h−1 to m s−1
| km h−1 | m s−1 |
|---|---|
| 18 | 5 |
| 36 | 10 |
| 54 | 15 |
| 72 | 20 |
| 90 | 25 |
| 108 | 30 |
To change km h−1 to m s−1, multiply by 518. To change m s−1 to km h−1, multiply by 185.
Uniform and non-uniform motion
Uniform motion in a straight line
The object covers equal distances in equal intervals of time, however small the intervals. It moves at a constant speed.
Non-uniform motion
The object covers unequal distances in equal intervals of time. Its speed increases, decreases, or both.
| Uniform motion | Non-uniform motion | |
|---|---|---|
| Distance in equal time intervals | Equal | Unequal |
| Speed | Constant | Changing |
| Position-time graph | Straight line | Curve |
| Example | A car on cruise control on a straight, empty road | A bus in city traffic; a ball rolling down a slope |
India’s scientific contributions
The idea that speed is distance divided by time is very old. It is used in the Aryabhatiya (5th century CE). The Ganitakaumudi (14th century CE) has this problem: two postmen walk towards each other from 210 yojanas apart (a yojana is an old Indian unit of distance), one at 9 yojanas a day and the other at 5 yojanas a day. When do they meet?
in one day=9 + 5=14 yojanasTime to meet=21014 days=15 days
In 15 days the first walks 9 × 15 = 135 yojanas and the second 5 × 15 = 75 yojanas; together, 210 yojanas.
Worked example 1
A bus covers 120 km in 2 h 30 min. Find its average speed in km h−1 and in m s−1.
- Given
- distance = 120 kmtime = 2.5 h
- Find
- average speed
Solution
The average speed is 48 km h−1, about 13.3 m s−1.
Remember
- Average speed = total distancetime interval; it has no direction.
- 1 km h−1 = 518 m s−1; 36 km h−1 = 10 m s−1; 72 km h−1 = 20 m s−1.
- Uniform motion: equal distances in equal time intervals (constant speed).
Quick checkA cyclist covers 100 m in each of the first three 20-second intervals. Is the motion uniform? What is the speed?Show answer
Equal distances in equal intervals, so (over these intervals) the motion is uniform.
4Average velocity, and speed versus velocity
Average velocity
The change in position (displacement) divided by the time interval in which the change happens. It tells how fast the position changes and in which direction.
average velocity = change in positiontime interval = displacementtime interval, vav = st
- Velocity needs a magnitude and a direction: it is a vector. Its direction is the direction of the displacement.
- In a straight line the direction is shown by a + or − sign.
- SI unit: m s−1, the same as for speed.
Rate of change
The change in a quantity divided by the time taken for that change. Average velocity is the average rate of change of position with time.
Example: a swimmer in a 25 m pool
Sarang swims to the far end of a 25 m pool and back in 50 s.
- The average speed and the magnitude of the average velocity are equal only if the object moves in one direction along a straight line.
- The average velocity is zero whenever the object comes back to where it started, however fast it moved.
Velocity at an instant
- Average velocity over a long interval can differ from the velocity at a particular instant. In this chapter, velocity means the velocity at an instant.
- Velocity at an instant (instantaneous velocity): the average velocity over a time interval so small that it hardly changes when made smaller still.
- A vehicle’s speedometer shows (very nearly) the magnitude of its velocity at that instant. The direction in which the tyres point gives the direction of the velocity.
Speed and velocity compared
| Speed | Velocity | |
|---|---|---|
| Meaning | How fast an object moves | How fast and in which direction the position changes |
| Average value | total distancetime interval | displacementtime interval |
| Direction | No (a scalar) | Yes (a vector) |
| Can it be zero for a moving object? | No (average speed) | Yes (average velocity, for a round trip) |
| Can it be negative? | No | Yes, in a straight line |
| SI unit | m s−1 | m s−1 |
Worked example 2
Riya walks 300 m east in 200 s, then 100 m west in 50 s. Find her average speed and average velocity.
- Given
- distance = 300 m + 100 m = 400 mdisplacement = 300 m − 100 m = 200 m easttime = 250 s
- Find
- average speed, average velocity
Solution
Average speed 1.6 m s−1; average velocity 0.8 m s−1 towards the east.
Remember
- Average velocity = displacementtime interval; its direction is that of the displacement.
- Speed is a scalar, velocity is a vector; both are measured in m s−1.
- A speedometer reads the magnitude of the velocity at that instant.
Quick checkA car goes round a closed circuit and returns to its start in 5 min. What is its average velocity?Show answer
Zero. Its displacement is zero because it ends where it started, so the average velocity, displacement divided by time, is 0.
5Average acceleration
You feel a jolt when a vehicle starts suddenly, or stops suddenly. The jolt is the feeling of a change in velocity.
Average acceleration
The change in velocity divided by the time interval in which the change happens.
average acceleration = change in velocitytime interval = final velocity − initial velocitytime interval
a = v − ut2 − t1, or a = v − ut when the interval is t
- u: initial velocity (at t1); v: final velocity (at t2).
- SI unit: m s−2 (m s−1 of change in velocity every second).
- Acceleration has a magnitude and a direction: it is a vector.
Direction of acceleration
| Speeding up | Slowing down | |
|---|---|---|
| Magnitude of velocity | Increases | Decreases |
| Direction of acceleration | Same as velocity | Opposite to velocity |
| Sign (velocity taken +) | Positive | Negative (often called deceleration or retardation) |
- Acceleration can come from a change in the magnitude of velocity, a change in its direction, or both (see uniform circular motion).
- Acceleration depends on how quickly the velocity changes, not on how fast the object moves. A bus at a steady 80 km h−1 on a straight road has zero acceleration.
Constant (uniform) acceleration
For an object moving in one direction along a straight line: the velocity changes by equal amounts in equal intervals of time. This chapter deals only with constant acceleration.
Worked example 3
A bus on a straight highway speeds up from 36 km h−1 to 54 km h−1 in 10 s. Later it brakes from 54 km h−1 to rest in 5 s. Find the average acceleration in each interval.
- Given
- 36 km h−1 = 10 m s−154 km h−1 = 15 m s−1
- Find
- a while speeding up and while braking
Solution
+0.5 m s−2 (along the velocity) while speeding up; −3 m s−2 (opposite to the velocity) while braking.
Activity 4.2: car makers state how many seconds a car takes to go from 0 to 100 km h−1 (27.8 m s−1). A car that does it in 10 s has an average acceleration of 27.8 m s−110 s = 2.78 m s−2. The shorter the time, the larger the acceleration.
Falling freely: the acceleration due to gravity
An object dropped from a height falls straight down, faster and faster.
- The acceleration is constant, 9.8 m s−2, and downwards (in the direction of motion). It is the acceleration due to gravity, written g.
- You may choose the origin and the positive direction to suit the problem (here the origin is the starting point and down is positive), but do not change them while solving it.
- Just as there is a velocity at an instant, there is an acceleration at an instant (instantaneous acceleration).
Remember
- Acceleration = change in velocitytime interval; unit m s−2.
- Speeding up: acceleration along the velocity. Slowing down: opposite to it (negative).
- Constant velocity means zero acceleration, however large the velocity.
- Free fall: g = 9.8 m s−2, downwards.
Quick checkA scooter’s velocity changes from 20 m s⁻¹ to 8 m s⁻¹ in 4 s. Find its acceleration.Show answer
The minus sign shows the acceleration is opposite to the velocity: the scooter is slowing down.
6Plotting a position-time graph
A graph shows how one quantity (position, velocity) depends on another (time). It helps to compare motions, to calculate quantities and to tell uniform from non-uniform motion.
Graphs in this chapter
All the graphs here are for motion in a straight line in one direction. So distance = magnitude of displacement, and speed = magnitude of velocity. If the position is zero at time zero, the position-time graph is the same as the distance-time graph, and the velocity-time graph is the same as the speed-time graph.
Activity 4.3: plotting a position-time graph
| Time (s) | Position (m) |
|---|---|
| 0 | 0 |
| 1 | 20 |
| 2 | 40 |
| 3 | 60 |
| 4 | 80 |
| 5 | 100 |
| 6 | 120 |
- On graph paper, draw two perpendicular lines meeting at the origin O: the horizontal X-axis (OX) and the vertical Y-axis (OY).
- Put the quantity that you choose freely, time, on the X-axis, and the quantity that depends on it, position, on the Y-axis. Write each axis title with its unit.
- Choose a scale that fits the data on the paper, for example X-axis: 5 small divisions = 1 s; Y-axis: 5 small divisions = 20 m.
- Mark the values along each axis from the origin: 1 s, 2 s, …; 20 m, 40 m, ….
- Plot each pair of values. For (1 s, 20 m): go up from 1 s and across from 20 m; mark the point where the two lines meet.
- Join the points with a smooth line.
- Points between the plotted ones show possible positions at in-between times. They are correct only if the speed really is constant.
- A graph is not a route map. It does not show the path; it shows how the position changes with time.
- The look of a graph depends on the scales chosen. A good scale uses most of the paper and makes the values easy to read.
A vehicle speeding up
| Time (s) | Position (m) |
|---|---|
| 0 | 0 |
| 2 | 1 |
| 4 | 4 |
| 6 | 9 |
| 8 | 16 |
| 10 | 25 |
| 12 | 36 |
Scale used: X-axis 5 divisions = 2 s; Y-axis 5 divisions = 5 m. In equal intervals of 2 s the vehicle covers 1 m, 3 m, 5 m, 7 m, …: more and more, so the curve gets steeper.
Remember
- Time on the X-axis, the quantity that depends on it on the Y-axis; label both with units.
- Choose a scale that fits the data and is easy to read.
- Straight line: constant velocity. Curve: changing velocity.
7Reading position-time graphs
What the shape tells you
| Shape of the position-time graph | Motion | Velocity |
|---|---|---|
| Straight line parallel to the time axis | At rest | Zero |
| Straight sloping line | Uniform motion | Constant |
| Curve getting steeper | Non-uniform: speeding up | Increasing (accelerated motion) |
| Curve getting less steep | Non-uniform: slowing down | Decreasing |
Slope of a position-time graph = velocity
Slope of a line
The steepness of the line: the change in the quantity on the Y-axis divided by the corresponding change in the quantity on the X-axis. It gives the rate of change of the Y quantity with the X quantity.
- BC is the change in position (s2 − s1); CA is the change in time (t2 − t1).
- Steeper line → greater velocity. In the same time interval, the object with the steeper graph has the larger displacement.
- For a curve, the velocity at an instant can also be found from the graph; you will learn how in higher classes.
An object at rest
If the graph is a horizontal line at 40 m, the object stays 40 m from the origin: it is at rest. (This position-time graph is not a distance-time graph: the distance travelled stays zero.)
- Where two position-time graphs cross, the two objects are at the same position at that instant. It does not mean they have the same velocity.
Remember
- Slope of a position-time graph = velocity.
- Horizontal line: rest. Straight sloping line: constant velocity. Curve: changing velocity.
- Steeper line: faster. Crossing lines: same position at that instant.
Quick checkOn a position-time graph, an object moves from 10 m at 2 s to 70 m at 5 s along a straight line. Find its velocity.Show answer
8Velocity-time graphs and acceleration
A velocity-time graph shows how the velocity of an object changes with time. It is plotted in the same way as a position-time graph, with velocity on the Y-axis.
| Time (s) | Speeding up: velocity (m s−1) | Slowing down: velocity (m s−1) |
|---|---|---|
| 0 | 0 | 15.0 |
| 5 | 2.5 | 12.5 |
| 10 | 5.0 | 10.0 |
| 15 | 7.5 | 7.5 |
| 20 | 10.0 | 5.0 |
| 25 | 12.5 | 2.5 |
| 30 | 15.0 | 0 |
| Shape of the velocity-time graph | Motion | Acceleration |
|---|---|---|
| Straight line parallel to the time axis | Constant velocity | Zero |
| Straight line sloping up | Velocity increasing by equal amounts in equal times | Constant, in the direction of velocity |
| Straight line sloping down | Velocity decreasing by equal amounts in equal times | Constant, opposite to the velocity |
| Line along the time axis (velocity 0) | At rest | Zero |
Slope of a velocity-time graph = acceleration
- For graph (a) of Figure 13 the line is flat: its slope, and so the acceleration, is zero.
- The minus sign in graph (b) shows the acceleration is opposite to the velocity: the car is slowing down.
Remember
- Slope of a velocity-time graph = acceleration.
- Flat line: constant velocity, zero acceleration. Straight sloping line: constant acceleration.
- Line sloping down: negative acceleration (slowing down).
Quick checkA velocity-time graph is a straight line from 4 m s⁻¹ at 0 s to 16 m s⁻¹ at 6 s. Find the acceleration.Show answer
9Displacement from a velocity-time graph
Area under a velocity-time graph
The area enclosed between the velocity-time graph and the time axis, over a time interval, equals the displacement in that interval.
(a) Constant velocity: a rectangle
Since the velocity is constant, it equals the average velocity, and velocity × time interval = displacement. So the car moves 120 m in 6 s.
(b) Constant acceleration: a rectangle and a triangle
Between 10 s and 20 s, A is at 5 m s−1 and B at 10 m s−1.
The area ABDE is a trapezium, so the same answer comes from ½ × (sum of parallel sides) × width: ½ × (5 + 10) m s−1 × 10 s = 75 m.
What each graph gives you
| Graph | Read directly | Slope gives | Area under it gives |
|---|---|---|---|
| Position-time | Position at each instant | Velocity | (not used) |
| Velocity-time | Velocity at each instant | Acceleration | Displacement |
Remember
- Area under a velocity-time graph = displacement (distance, for motion in one direction).
- Rectangle: velocity × time. Triangle: ½ × base × height. Trapezium: ½ × (sum of parallel sides) × width.
- Work out areas in the units of the axes: m s−1 × s = m.
Quick checkA velocity-time graph rises in a straight line from 0 to 12 m s⁻¹ in 4 s. How far does the object go?Show answer
10Kinematic equations (equations of motion)
For motion in a straight line with constant acceleration, five quantities are linked by simple equations, called the kinematic equations (equations of motion). With them you can predict the position and velocity of an object at a future time.
| Symbol | Quantity | SI unit |
|---|---|---|
| u | Initial velocity (at time 0) | m s−1 |
| v | Final velocity (at time t) | m s−1 |
| a | Acceleration (constant) | m s−2 |
| t | Time interval | s |
| s | Displacement in time t | m |
1. Velocity-time relation
The acceleration is constant, so it equals the average acceleration over any interval:
2. Position-time relation
The displacement is the area OABD under the graph. Here AO = u, DO = CA = t and BC = BD − CD = v − u.
3. Velocity-position relation
Remove t from equation (2), using t = v − ua from equation (1):
Two more equations
- The area OABD is a trapezium: s = 12 × (u + v) × t. So displacement = average of initial and final velocities × time.
- Putting u = v − at into equation (2) gives s = vt − 12at2.
v = u + at
No s in it. Use when the displacement is not given or asked.
s = ut + ½at2
No v in it. Use when the final velocity is not given or asked.
v2 = u2 + 2as
No t in it. Use when the time is not given or asked.
s = ½(u + v)t
No a in it. Use when the acceleration is not given or asked.
Using the equations
- They hold only when the acceleration is constant.
- For motion in one direction, distance = magnitude of displacement and speed = magnitude of velocity.
- If the motion can be in both directions, the signs of u, v, a and s show their directions. Take the direction of the initial velocity as positive; then an object slowing down has negative a.
- ‘Starts from rest’ means u = 0; ‘comes to rest’ or ‘stops’ means v = 0.
Worked example 4
A car moving on a highway brakes with an acceleration of −4 m s−2. How far does it go before stopping if its speed was (i) 54 km h−1, (ii) 108 km h−1?
- Given
- a = −4 m s−2v = 0u = 15 m s−1 or 30 m s−1
- Find
- s
Solution
(i) about 28.1 m; (ii) 112.5 m. Doubling the speed makes the braking distance four times as long, because it depends on the square of the speed.
Worked example 5
A train starts from rest and accelerates uniformly at 0.5 m s−2 for 1 minute. Find its final velocity and the distance it covers.
- Given
- u = 0a = 0.5 m s−2t = 60 s
- Find
- v and s
Solution
Final velocity 30 m s−1 (108 km h−1); distance 900 m.
Remember
- v = u + at; s = ut + ½at2; v2 = u2 + 2as.
- Valid only for constant acceleration in a straight line.
- Pick the equation that does not contain the quantity you neither know nor need.
- Change km h−1 to m s−1 before using the equations.
Quick checkA ball rolls from rest down a slope with an acceleration of 2 m s⁻². How far does it roll in 3 s?Show answer
11Stopping distance and safe driving
When a driver sees danger and brakes, the vehicle does not stop at once. It covers a stopping distance made of two parts.
Stopping distance = reaction distance + braking distance
- Reaction distance: the distance covered at full speed during the driver’s reaction time (the time between seeing the danger and pressing the brake) = speed × reaction time.
- Braking distance: the distance covered after the brakes are pressed, while the vehicle slows to rest. From v2 = u2 + 2as with v = 0, it is u22 × size of a.
Worked example 6
A car moves at 20 m s−1 (72 km h−1). The driver takes 1 s to react, then the brakes slow the car at 5 m s−2. Find the stopping distance.
- Given
- u = 20 m s−1reaction time = 1 sa = −5 m s−2
- Find
- stopping distance
Solution
The car needs 60 m to stop: the area of the rectangle and the triangle in Figure 17.
What makes the stopping distance longer
| Factor | Why |
|---|---|
| Higher speed | Reaction distance grows with speed; braking distance grows with the square of speed |
| Slow reaction (tiredness, phone, alcohol, distraction) | Longer reaction time, so a longer reaction distance |
| Wet, oily or icy road; worn-out tyres | Less grip, so smaller deceleration and a longer braking distance |
| Heavier load | The same brakes slow a heavier vehicle less quickly |
| Night, fog, heavy rain or snow | Danger is seen later, and roads are often slippery |
Bridging science and society
A driver must keep a safe distance from the vehicle ahead: at least the stopping distance, and more at higher speeds or on wet roads. If the truck ahead brakes suddenly, a car that is too close will hit it. Many countries, including India, are developing vehicle-to-vehicle (V2V) communication, in which vehicles exchange signals and warn drivers of a possible collision.
Remember
- Stopping distance = reaction distance + braking distance.
- Braking distance ∝ (speed)2: double the speed, four times the braking distance.
- Keep a larger gap at higher speed, on wet roads and in poor visibility.
Quick checkA bus at 10 m s⁻¹ brakes at 2 m s⁻² after a reaction time of 0.5 s. What is its stopping distance?Show answer
12Motion in a plane and uniform circular motion
Motion in one, two and three dimensions
| Kind of motion | Also called | Examples |
|---|---|---|
| Along a straight line | Motion in one dimension | A train on a straight track; a falling ball |
| In a plane (flat surface) | Motion in two dimensions | A vehicle overtaking another; a kicked football; a satellite in a circular orbit |
| In space | Motion in three dimensions | A car climbing a winding mountain road; a bird flying; an aircraft |
Circular motion
The motion of an object along a circular path.
- A child on a merry-go-round moves from A to C through B. The distance travelled is the curved arc ABC; the displacement is the straight line AC. They are not equal.
- In one revolution (one full round) of a circle of radius R: distance = circumference = 2πR, displacement = 0 (back to the start).
If one revolution takes time T (the time period):
vav = 2πRT, average velocity over one revolution = 0
Uniform circular motion
Motion along a circular path at constant (uniform) speed.
- In uniform circular motion the speed is the same at every point, so 2πR/T is the speed at every point, not just the average.
- The direction of velocity changes all the time.
Why the direction keeps changing
- On a rectangular track an athlete changes direction 4 times in a round; on a hexagonal track, 6 times.
- As the number of sides grows, the turns come more and more often. In the end the track becomes a circle and the direction changes continuously.
Tangent to a circle
A straight line that touches the circle at one and only one point. The velocity at any point of a circular path is along the tangent at that point, in the direction of motion.
Activity 4.5: a marble in a ring
- Put a ring (such as an adhesive tape ring) flat on a smooth surface.
- Set a marble rolling round the inside edge of the ring.
- After one or two rounds, lift the ring without disturbing the marble.
- Repeat a few times.
Observation: once the ring is lifted, the marble moves in a straight line, in the direction it was moving at that instant: along the tangent. The ring was what kept turning it. (The reason is studied in a later chapter.)
Uniform circular motion is accelerated motion
- Velocity changes if its magnitude, its direction, or both change. Acceleration is non-zero whenever velocity changes.
- In uniform circular motion the speed is constant but the direction changes continuously, so the motion is accelerated.
- In everyday speech, ‘accelerating’ means speeding up. In science, a vehicle turning a corner at a steady speed is also accelerating.
- Uniform circular motion is an idealised model: a perfectly circular path at a perfectly steady speed is rare. It is still useful for planets going round the Sun or a vehicle taking a circular turn.
Worked example 7
An athlete runs round a circular track of radius 35 m in 44 s at a steady speed. Find her speed. (Take π = 227.)
- Given
- R = 35 mT = 44 s
- Find
- speed
Solution
Her speed is 5 m s−1. After one round her displacement, and so her average velocity, is zero.
- Points on a spinning disc all take the same time for one turn, but a point farther from the centre goes round a bigger circle, so it moves faster. Numbers 7 cm from the centre move 74 times as fast as letters 4 cm from it, which is why they blur first.
Remember
- One revolution: distance 2πR, displacement 0.
- Speed in uniform circular motion = 2πRT.
- Velocity is along the tangent; its direction changes continuously, so the motion is accelerated.
Quick checkA stone tied to a string is whirled in a circle and the string breaks. In which direction does the stone fly off?Show answer
Along the tangent to the circle at the point where the string broke: the direction of its velocity at that instant.
13Solving numericals on motion
A method that always works
- Read the question and draw a quick sketch: the start, the direction of motion (+) and what happens.
- Write Given with symbols ({U}, {V}, {A}, {T}, {S}) and Find.
- Change units to SI: km h−1 to m s−1 (× 518), minutes to seconds, km to m.
- Translate words: ‘from rest’ means u = 0; ‘stops’ means v = 0; ‘slows down’ means a is negative; ‘uniform velocity’ means a = 0.
- Choose the equation (or graph area or slope) that links what you know to what you want.
- Substitute with units, work it out, and give the answer with its unit and, for a vector, its direction.
Which tool for which question
| You want | Use |
|---|---|
| Average speed | total distancetotal time (not the average of the speeds) |
| Average velocity | displacementtotal time |
| Acceleration | a = v − ut, or the slope of a velocity-time graph |
| Displacement from a graph | area under the velocity-time graph |
| Velocity from a graph | slope of the position-time graph |
| A journey in stages | work out each stage separately, then add the distances and the times |
Worked example 8
A car travels 30 km at 60 km h−1 and then another 30 km at 30 km h−1. Find its average speed for the whole journey.
- Given
- two stages of 30 km each
- Find
- average speed
Solution
The average speed is 40 km h−1, not 45 km h−1: the car spends longer at the lower speed.
Common mistakes
- Using km h−1 with seconds, or mixing minutes and seconds.
- Taking the average speed as the average of two speeds.
- Forgetting the minus sign of the acceleration when an object slows down.
- Using the kinematic equations when the acceleration is not constant (use each stage separately, or a graph).
- Giving a velocity or a displacement without its direction.
- Reading the slope of a velocity-time graph as velocity (it is acceleration).
Remember
- Units first: everything in m, s, m s−1 and m s−2.
- Average speed = total distancetotal time.
- A vector answer needs a direction (or a sign).