Chapter 10 · Science

Light: Mirrors and Lenses

Concave and convex mirrors and the images they form, the two laws of reflection, how curved mirrors and lenses bring light together or spread it out, convex and concave lenses, and where we use them.

Answers to all 12 questions under “Keep the curiosity alive” at the end of the chapter. Each question is given exactly as it appears in the book. Figures the questions need are redrawn. The page also has boxes asking you to prepare and discuss questions of your own, and a “Discover, design, and debate” list of projects. Those are for you to do, so they are not answered here.

Keep the curiosity alive

Questions 1 to 12

  1. Q1
    A light ray is incident on a mirror and gets reflected by it (Fig. 10.21). The angle made by the incident ray with the normal to the mirror is 40°. What is the angle made by the reflected ray with the mirror?
    Fig. 10 redrawn: a ray of light falls on a mirror and is reflected. The dashed normal is marked, with the angle of incidence i and the angle of reflection r.irMirror
    Fig. 10.21, redrawn.
    (i) 40°(ii) 50°(iii) 45°(iv) 60°

    Answer

    (ii) 50°

    The angle of incidence is 40°. By the law of reflection, the angle of reflection is also 40°. This angle is measured from the normal. The normal is at 90° to the mirror, so the reflected ray makes 90° − 40° = 50° with the mirror.

    The answer: the reflected ray makes 40° with the normal, so it makes 90° − 40° = 50° with the mirror surface.ir40°40°50°mirror
    The reflected ray makes 40° with the normal and 50° with the mirror.
  2. Q2
    Fig. 10.22 shows three different situations where a light ray falls on a mirror:(i) The light ray falls along the normal.(ii) The mirror is tilted, but the light ray still falls along the normal to the tilted surface.(iii) The mirror is tilted, and the light ray falls at an angle of 20° from the normal.
    Fig. 10 redrawn: (a) a ray falling along the normal of a flat mirror; (b) a tilted mirror with the ray along its normal; (c) a tilted mirror with the ray at 20° to its normal.20°(a)(b)(c)
    Fig. 10.22, redrawn.

    Draw the reflected ray in each case (Use a ruler and protractor for accurate drawing). What is the angle of reflection in each case?

    Answer

    The answer: (a) and (b) the ray falls along the normal and goes straight back along the same path, so the angle of reflection is 0°. (c) The ray falls at 20° to the normal and is reflected at 20° on the other side of the normal.20°20°(a)r = 0°(b)r = 0°(c)r = 20°
    The reflected ray in each case.
    • (i) The ray falls along the normal, so the angle of incidence is 0°. It is reflected straight back along the same path. Angle of reflection = 0°.
    • (ii) The mirror is tilted, but the ray is still along the normal to the mirror. So again it goes straight back along its own path. Angle of reflection = 0°.
    • (iii) The angle of incidence is 20°. The reflected ray leaves on the other side of the normal, at the same angle. Angle of reflection = 20°.

    How to draw (iii): at the point where the ray hits, draw the normal at 90° to the tilted mirror. Use the protractor to mark 20° from the normal on the other side. Draw the reflected ray through this mark, with an arrow pointing away from the mirror.

  3. Q3
    In Fig. 10.23, the cap of a sketch pen is placed in front of three types of mirrors.
    Fig. 10 redrawn: the cap of a sketch pen in front of three round mirrors. In (i) its image is smaller than the cap. In (ii) its image is much bigger. In (iii) its image is the same size as the cap.(i)(ii)(iii)
    Fig. 10.23, redrawn.

    Match each image with the correct mirror.

    ImageMirror
    (i)Plane mirror
    (ii)Convex mirror
    (iii)Concave mirror

    Answer

    ImageMirror
    (i)Convex mirror: the image is erect but much smaller than the cap.
    (ii)Concave mirror: the image is erect and much bigger than the cap (the cap is close to the mirror).
    (iii)Plane mirror: the image is erect and the same size as the cap.
  4. Q4
    In Fig. 10.24, the cap of a sketch pen is placed behind a convex lens, a concave lens, and a flat transparent glass piece — all at the same distance. Match each image with the correct type of lens or glass.
    Fig. 10 redrawn: a red sketch-pen cap seen through three pieces of glass at the same distance. In (i) the cap looks wider and bigger. In (ii) the cap looks smaller. In (iii), through flat glass, it looks the same as it is.(i)(ii)(iii)
    Fig. 10.24, redrawn.
    ImageLens/glass type
    (i)Flat transparent glass piece
    (ii)Convex lens
    (iii)Concave lens

    Answer

    ImageLens/glass type
    (i)Convex lens: the cap looks bigger (enlarged) and erect.
    (ii)Concave lens: the cap looks smaller (diminished) and erect.
    (iii)Flat transparent glass piece: the cap looks as it really is, because flat glass does not change the size.
  5. Q5
    When the light is incident along the normal on the mirror, which of the following statements is true:(i) Angle of incidence is 90°(ii) Angle of incidence is 0°(iii) Angle of reflection is 90°(iv) No reflection of light takes place in this case

    Answer

    (ii) Angle of incidence is 0°

    The angle of incidence is the angle between the ray and the normal. A ray along the normal makes 0° with it. The light is still reflected: it goes straight back along the normal, so the angle of reflection is also 0°.

  6. Q6
    Three mirrors — plane, concave and convex are placed in Fig. 10.25. On the basis of the images of the graph sheet formed in the mirrors, identify the mirrors and write their names above the mirrors.
    Fig. 10 redrawn: a sheet of graph paper stands behind three round mirrors lying side by side. The left mirror shows the squares much bigger. The middle mirror shows them the same size as on the sheet. The right mirror shows them smaller and slightly curved.
    Fig. 10.25, redrawn.

    Answer

    MirrorName
    LeftConcave mirror: the squares look much bigger.
    MiddlePlane mirror: the squares look the same size, with straight lines.
    RightConvex mirror: the squares look smaller, and the lines curve.

    A plane mirror shows things the same size. A concave mirror shows nearby things enlarged. A convex mirror always shows them diminished.

  7. Q7
    In a museum, a woman walks towards a large concave mirror (Fig. 10.26). She will see that:

    The book shows a woman standing some distance from a large round concave mirror on a wall. Her image in the mirror is upside down.

    (i) her erect image keeps decreasing in size.(ii) her inverted image keeps decreasing in size.(iii) her inverted image keeps increasing in size and eventually it becomes erect and magnified.(iv) her erect image keeps increasing in size.

    Answer

    (iii) her inverted image keeps increasing in size and eventually it becomes erect and magnified.

    When she is far from a concave mirror, her image is inverted and small. As she walks closer, the inverted image grows bigger. When she is very close to the mirror, the image becomes erect and enlarged.

  8. Q8
    Hold a magnifying glass over text and identify the distance where you can see the text bigger than they are written. Now move it away from the text. What do you notice? Which type of lens is a magnifying glass?

    Answer

    • When the magnifying glass is held close to the text (a few centimetres away), the letters look bigger and erect.
    • As it is moved away, the letters first get even bigger. Then they become blurred.
    • When it is moved farther still, the letters look upside down and get smaller.
    • A magnifying glass is a convex lens. It is thicker in the middle than at the edges.
  9. Q9
    Match the entries in Column I with those in Column II.
    Column IColumn II
    (i) Concave mirror(a) Spherical mirror with a reflecting surface that curves inwards.
    (ii) Convex mirror(b) It forms an image which is always erect and diminished in size.
    (iii) Convex lens(c) Object placed behind it may appear inverted at some distance.
    (iv) Concave lens(d) Object placed behind it always appears diminished in size.

    Answer

    (i) – (a), (ii) – (b), (iii) – (c), (iv) – (d)

    • (i) A concave mirror has a reflecting surface that curves inwards.
    • (ii) A convex mirror always forms an erect, diminished image.
    • (iii) Through a convex lens, an object some distance away looks inverted.
    • (iv) Through a concave lens, an object always looks diminished.
  10. Q10
    The following question is based on Assertion/Reason.

    Assertion: Convex mirrors are preferred for observing the traffic behind us.

    Reason: Convex mirrors provide a significantly larger view area than plane mirrors.

    Choose the correct option:

    (i) Both Assertion and Reason are correct and Reason is the correct explanation for Assertion.(ii) Both Assertion and Reason are correct but Reason is not the correct explanation for Assertion.(iii) Assertion is correct but Reason is incorrect.(iv) Both Assertion and Reason are incorrect.

    Answer

    (i) Both Assertion and Reason are correct and Reason is the correct explanation for Assertion.

    A convex mirror bulges outwards, so it shows a much wider area of the road than a plane mirror of the same size. Its image is also always erect. This is why convex mirrors are used as side-view mirrors.

  11. Q11
    In Fig. 10.27, note that O stands for object, M for mirror, and I for image.
    Fig. 10 redrawn: two line drawings with an object O, a mirror M and an image I. In (a) the image arrow is shorter than the object arrow. In (b) the image arrow is taller than the object arrow. Both arrows point up.OMI(a)OMI(b)
    Fig. 10.27, redrawn.

    Which of the following statements is true?

    (i) Figure (a) indicates a plane mirror and Figure (b) indicates a concave mirror.(ii) Figure (a) indicates a convex mirror and Figure (b) indicates a concave mirror.(iii) Figure (a) indicates a concave mirror and Figure (b) indicates a convex mirror.(iv) Figure (a) indicates a plane mirror and Figure (b) indicates a convex mirror.

    Answer

    (ii) Figure (a) indicates a convex mirror and Figure (b) indicates a concave mirror.

    • In (a), the image is erect but smaller than the object. Only a convex mirror always does this.
    • In (b), the image is erect and bigger than the object. A concave mirror does this when the object is close to it.
    • It cannot be a plane mirror in either case, because a plane mirror gives an image of the same size.
  12. Q12
    Place a pencil behind a transparent glass tumbler (Fig. 10.28a). Now fill the tumbler halfway with water (Fig. 10.28b). How does the pencil appear when viewed through the water? Explain why its shape appears changed.

    Answer

    A pencil stands behind a glass tumbler. (a) Empty tumbler: the pencil looks normal. (b) Tumbler half full of water: the part of the pencil seen through the water looks much thicker than the part above the water.(a)(b)looks thicker
    A pencil behind a tumbler: (a) empty; (b) half full of water.
    • The part of the pencil seen through the water looks thicker (wider) than the part above the water. The pencil also looks broken at the water surface.
    • The tumbler is round. With water in it, the water forms a curved, transparent shape that is thicker in the middle than at the sides.
    • So the water in the tumbler acts like a convex lens. It makes the part of the pencil behind it look bigger, just as a water drop makes letters look bigger.
    • Above the water, light passes only through thin glass, so that part of the pencil looks normal.