Chapter 9 · Science

The Amazing World of Solutes, Solvents, and Solutions

Solutes, solvents and solutions; how much solute dissolves and how temperature changes it; gases in water; density, how to measure mass and volume, and why things float or sink.

Done reading? Try the Sort it out activity on this chapter.
In this chapter 11 topics
  1. 1Solute, solvent and solution
  2. 2Unsaturated and saturated solutions
  3. 3Concentration: dilute and concentrated
  4. 4Solubility and temperature
  5. 5Gases dissolve in water too
  6. 6Density
  7. 7Floating and sinking
  8. 8Measuring mass
  9. 9Measuring the volume of liquids
  10. 10Volume of solids and finding density
  11. 11Temperature, pressure and density

1Solute, solvent and solution

Mixture

Two or more substances mixed together, each keeping its own properties.

Uniform and non-uniform mixtures

  • Uniform mixture: the parts are spread evenly. Every drop is the same. The parts cannot be seen separately.
  • Non-uniform mixture: the parts are not spread evenly. They can be seen with the eye or a hand lens.
  • Salt or sugar in water forms a uniform mixture. Every sip of ORS (oral rehydration solution) tastes the same.
  • Sand, chalk powder or sawdust in water forms a non-uniform mixture.
Three glasses. (a) Salt and sugar stirred into water: it looks like clear water all through, a uniform mixture. (b) Sand in water: the sand settles at the bottom, a non-uniform mixture. (c) Sawdust in water: most of it floats on top and some bits hang in the water, a non-uniform mixture.sandsawdust floatslooks like water(a) salt, sugaruniform(b) sandnon-uniform(c) sawdustnon-uniform
Figure 1. A uniform mixture and two non-uniform mixtures.

Solution

A uniform mixture of two or more substances. Example: salt dissolved in water.

Solute

The substance that dissolves. In salt water, salt is the solute.

Solvent

The substance in which the solute dissolves. In salt water, water is the solvent.

Solute + Solvent → Solution

  • Dissolving: the solute breaks into tiny particles. They spread evenly between the solvent particles.
  • A solid in a liquid: the solid is the solute and the liquid is the solvent.
  • Two liquids: the one in the smaller amount is the solute. The one in the larger amount is the solvent.
  • Sugar syrup (chashni) has much more sugar than water. Still, water is the solvent and sugar is the solute, because sugar is the solid.
A beaker of a clear solution and a magnified view of it. Solute particles (yellow) are spread evenly among the many solvent particles (blue).solute particlesolvent particlea solutionmagnified idea
Figure 2. Solute particles spread evenly among solvent particles.

Kinds of solutions

SoluteSolventExample
SolidLiquidSalt or sugar in water
LiquidLiquidVinegar (acetic acid in water)
GasLiquidSoda water (carbon dioxide in water)
GasGasAir (oxygen and other gases in nitrogen)
SoluteSolvent, Example
SolidSolvent: Liquid
Example: Salt or sugar in water
LiquidSolvent: Liquid
Example: Vinegar (acetic acid in water)
GasSolvent: Liquid
Example: Soda water (carbon dioxide in water)
GasSolvent: Gas
Example: Air (oxygen and other gases in nitrogen)
  • Air is a solution. Its gases are mixed evenly, so it is a uniform mixture.
  • Nitrogen is the largest part of air, so it is the solvent.

Water: a very good solvent

  • Water dissolves more substances than any other common liquid. So it is often called the universal solvent.
  • Sugar and salt dissolve in water but not in oil. Not every solvent dissolves every solute.
  • Other solvents: alcohol (in many medicines), and oils for some herbal medicines.

Remember

  • Solution = a uniform mixture.
  • Solute dissolves; solvent does the dissolving.
  • Two liquids: the smaller amount is the solute.
  • Air is a solution of gases.
Quick checkA little alcohol is mixed with a lot of water. Name the solute and the solvent.Show answer

Both are liquids, so the one in the smaller amount is the solute. Alcohol is the solute and water is the solvent.

2Unsaturated and saturated solutions

Adding salt to water (Activity)

  1. Half fill a glass with water.
  2. Add one spoon of salt and stir. It dissolves completely.
  3. Keep adding salt, one spoon at a time, stirring each time.
  4. After a few spoons, some salt stays at the bottom however much you stir.
Adding salt, a spoon at a time, to the same amount of water. After 1 spoon and after 3 spoons all the salt dissolves: the solution is unsaturated. After 5 spoons some salt stays at the bottom however much you stir: the solution is saturated.undissolvedsalt1 spoon:all dissolvesunsaturated3 spoons:all dissolvesunsaturated5 spoons:some stayssaturatedSalt in the same amount of water
Figure 3. A fixed amount of water can dissolve only a limited amount of salt.
Salt addedWhat happens
1 spoonDissolves completely
2 spoonsDissolves completely
3 spoonsDissolves completely
More spoonsSome salt stays undissolved at the bottom

A fixed amount of water can dissolve only a limited amount of salt at a given temperature.

Unsaturated solution

A solution in which more solute can still dissolve at that temperature.

Saturated solution

A solution in which no more solute can dissolve at that temperature. Extra solute settles at the bottom.

  • A saturated solution holds the most solute it can at that temperature.
  • An unsaturated solution holds less solute than a saturated one (same solvent amount, same temperature).
  • Always say the temperature. A solution saturated at 20 °C is unsaturated at 50 °C.

Our scientific heritage: salt from Ningel

  • In Ningel village, Manipur, salt is still made by old methods.
  • Salty water is drawn from salt wells. It is boiled in large metal pans.
  • The water evaporates and salt crystals form. They are shaped into round “salt cakes”.

Remember

  • Unsaturated: more solute can dissolve.
  • Saturated: no more solute can dissolve; extra solute settles.
  • Saturation depends on temperature.
Quick checkSome sugar stays at the bottom of a cup of tea after stirring. Is the tea saturated? How can you make the sugar dissolve?Show answer

Yes, it is saturated with sugar at that temperature. Heat the tea or add more tea (more solvent). Then the extra sugar dissolves.

3Concentration: dilute and concentrated

Concentration

The amount of solute in a fixed amount of solution (or solvent).

Dilute solution

A solution with a small amount of solute in it.

Concentrated solution

A solution with a large amount of solute in it.

  • Dilute and concentrated are relative words. We use them to compare two solutions.
  • One spoon of salt in a glass of water is dilute compared with two spoons in the same water.
  • To make a solution more dilute, add more solvent. To make it more concentrated, add more solute.
Two glasses of the same orange drink. Glass A has 2 spoons of powder in 100 mL of water and is pale. Glass B has 4 spoons in 50 mL and is a deep orange. Magnified views of the same small volume show far fewer solute particles in A than in B, so A is dilute and B is more concentrated.Glass A2 spoons in 100 mLdiluteGlass B4 spoons in 50 mLmore concentrated
Figure 4. The same small volume holds more solute in a concentrated solution.

Comparing two solutions

Which is more concentrated: 2 spoons of salt in 100 mL of water, or 4 spoons in 50 mL? Find the salt in the same amount of water.

Worked example 1

Compare 2 spoons of salt in 100 mL of water (A) with 4 spoons in 50 mL of water (B).

Given
A: 2 spoons in 100 mLB: 4 spoons in 50 mL
Find
Salt in 100 mL of water for each

Solution

Salt in 100 mL (A)=2 spoonsSalt in 100 mL (B)=4 spoons × 100 mL50 mL=4 spoons × 2=8 spoons

B has 8 spoons per 100 mL against 2 for A. B is 4 times as concentrated as A.

Remember

  • Concentration = how much solute is in a fixed amount of solution.
  • Compare solutions using the same amount of solvent.
  • Add solvent to dilute; add solute to concentrate.
Quick checkJuice X has 10 g of sugar in 200 mL. Juice Y has 10 g of sugar in 100 mL. Which is more concentrated?Show answer

Y. It has the same sugar in half the volume, so it has 20 g in 200 mL. That is twice as much as X.

4Solubility and temperature

Solubility

The greatest amount of a solute that can dissolve in a fixed amount of solvent at a given temperature. The fixed amount is usually 100 mL or 100 g.

  • Different solutes have different solubilities in the same solvent.
  • A saturated solution holds exactly the solubility amount of solute.

Does heating help? (Activity, done by a teacher)

  1. Take about 50 mL of water in a beaker. Note its temperature, say 20 °C.
  2. Stir in baking soda (sodium hydrogen carbonate) until some stays undissolved.
  3. Heat to 50 °C while stirring. The leftover baking soda dissolves.
  4. Add more until some stays undissolved again. Heat to 70 °C. Again it dissolves.

Safety: take care near the flame and hot glass. Use a holder or tongs.

Apparatus for dissolving baking soda in water at higher temperatures. A beaker of water with undissolved baking soda at the bottom stands on a wire gauze on a tripod stand over a spirit lamp. A laboratory thermometer held by a clamp on a laboratory stand dips into the water, and a glass rod is used to stir.laboratory standthermometerglass rodbeakerwater withwire gauzetripod standspirit lampbaking soda
Figure 5. Dissolving more baking soda by heating the water.
  • Water at 70 °C dissolves more baking soda than water at 50 °C. Water at 20 °C dissolves the least.
  • For most solids, solubility increases as temperature increases.
  • A saturated solution becomes unsaturated when it is heated.
  • When a hot saturated solution cools, the extra solute comes out as crystals.
SoluteIn 100 g of water at 20 °CAt 60 °C
Baking sodaabout 10 gabout 16 g
Common saltabout 36 gabout 37 g
Sugarabout 204 gabout 287 g
SoluteIn 100 g of water at 20 °C, At 60 °C
Baking sodaIn 100 g of water at 20 °C: about 10 g
At 60 °C: about 16 g
Common saltIn 100 g of water at 20 °C: about 36 g
At 60 °C: about 37 g
SugarIn 100 g of water at 20 °C: about 204 g
At 60 °C: about 287 g

The rise is large for sugar and small for salt. So hot water helps sugar dissolve much more.

Our scientific heritage

  • Ayurveda, Siddha and other traditional Indian systems of medicine use water as the main solvent.
  • Some medicines use a mix of water and alcohol to draw out the useful parts of herbs.
  • Oils, ghee and milk are also used as solvents in these medicines.

Be a scientist: Asima Chatterjee

  • Indian chemist who studied medicinal plants.
  • She used solvents and solutions to extract and separate useful compounds from plants.
  • Her work helped develop medicines against epilepsy (fits) and malaria.
  • Second Indian woman to earn a Doctorate of Science, after Janaki Ammal.
  • First woman to win the Shanti Swarup Bhatnagar Award in chemical science. She also received the Padma Bhushan.

Remember

  • Solubility: the most solute that dissolves in a fixed amount of solvent at one temperature.
  • Solubility of most solids rises with temperature.
  • Heating turns a saturated solution into an unsaturated one.
Quick checkWhy does sugar dissolve faster and in larger amounts in hot tea than in iced tea?Show answer

The solubility of sugar increases with temperature. Hot tea can hold much more sugar before it becomes saturated.

5Gases dissolve in water too

  • Many gases dissolve in water. Examples: oxygen, carbon dioxide.
  • Oxygen dissolves only a little. Yet this small amount keeps all water life alive: fish, water plants and other organisms.
  • Fish take in dissolved oxygen through their gills.
  • A gas dissolved in water forms a uniform mixture, a solution.
A home aquarium with gravel, water plants and three fish. An air pump on the table pushes air through a thin tube to a stone at the bottom of the tank. A stream of air bubbles rises through the water, so more oxygen dissolves in it for the fish.air pumpair bubbleswater with dissolved oxygen
Figure 6. An air pump helps more oxygen dissolve in aquarium water.

Temperature and gases

  • Gases dissolve less as the temperature rises. This is the opposite of most solids.
  • Cold water holds more dissolved oxygen. So cold seas and rivers can support plenty of life.
  • Warm water holds less oxygen. In hot weather, fish in a warm pond may come up to the surface to gulp air.
  • Hot waste water from factories can warm a river and lower its oxygen. This harms water life.
Two bottles of a fizzy drink. (a) A cold bottle with its cap on: only a few bubbles; most of the carbon dioxide stays dissolved. (b) A warm bottle that has just been opened: many bubbles of gas rise and foam pours out of the neck, because warm water holds less dissolved gas.fewbubblesmanybubblesfizz(a) cold, cap ongas stays dissolved(b) warm, openedgas escapes
Figure 7. Warm soda loses its dissolved gas faster.
  • Soda drinks have carbon dioxide dissolved under pressure.
  • Opening the bottle lowers the pressure, so bubbles of gas come out: the drink fizzes.
  • Warm soda fizzes more and goes “flat” faster, because warm water holds less gas.
Solids in waterGases in water
When temperature risesUsually dissolve moreDissolve less
ExampleMore sugar dissolves in hot teaWarm water holds less oxygen
Solids in water, Gases in water
When temperature risesSolids in water: Usually dissolve more
Gases in water: Dissolve less
ExampleSolids in water: More sugar dissolves in hot tea
Gases in water: Warm water holds less oxygen

Remember

  • Oxygen dissolves a little in water; it keeps water life alive.
  • Gases dissolve less in warm water.
  • Solids usually dissolve more in warm water.
Quick checkWhy does a glass of cold water left in a warm room show small bubbles on the inside after some time?Show answer

As the water warms, it can hold less dissolved air. The extra air comes out as small bubbles on the glass.

6Density

Heaviness of a material

  • A wooden stick and an iron rod of the same size feel very different. The iron is much heavier.
  • So “iron is heavier than wood” compares equal volumes. This idea is called density.
  • Think of a crowded bus: many people packed into the same space is “dense”. A forest with trees close together is a dense forest.
A two-pan balance with a wooden block on the left pan and an iron block of exactly the same size on the right pan. The beam tips and the iron side goes down, so the iron block has more mass in the same volume: iron is denser than wood.wooden blockiron blockpointerbeamSame size: the iron side goes down
Figure 8. Equal volumes of iron and wood: the iron has more mass.

Density

The mass of a substance in one unit of volume. It tells how much matter is packed into a given space.

Density = MassVolume

  • Mass = the amount of matter in an object.
  • Volume = the space an object takes up.
  • Density does not depend on shape or size. Cut a block in half: mass and volume both halve, so density stays the same.
  • Density changes with temperature and pressure. Pressure mainly affects gases.
Four blocks of the same volume, 10 cubic centimetres each, on digital balances. Cork reads 2.4 g, wood 6 g, aluminium 27 g and iron 79 g. The same volume has more and more mass from cork to iron, so the density increases from left to right.2.40gONTAREcork0.24 g/cm³6.00gONTAREwood0.6 g/cm³27.00gONTAREaluminium2.7 g/cm³79.00gONTAREiron7.9 g/cm³Four blocks, each of volume 10 cm³more mass in the same volume = denserleast dense → most dense
Figure 9. The same volume of different materials has different masses.

Units of density

UnitNameUsed for
kg/m3kilogram per cubic metre (SI unit)Any substance
g/cm3gram per cubic centimetreSolids and liquids
g/mLgram per millilitreLiquids
UnitName, Used for
kg/m3Name: kilogram per cubic metre (SI unit)
Used for: Any substance
g/cm3Name: gram per cubic centimetre
Used for: Solids and liquids
g/mLName: gram per millilitre
Used for: Liquids
  • 1 mL = 1 cm3, so 1 g/mL = 1 g/cm3.
  • 1 kg/m3 = 1000 g in 1000 L = 1 g/L.
  • 1 g/cm3 = 1000 kg/m3.
  • Water: 1 mL has a mass of about 1 g. So the density of water is about 1 g/cm3, or 1000 kg/m3.
  • So 10 mL of water is about 10 g, and 100 mL is about 100 g.

Worked example 2

A block of aluminium has a mass of 27 g and a volume of 10 cm3. Find its density in g/cm3 and in kg/m3.

Given
Mass = 27 gVolume = 10 cm3
Find
Density

Solution

Density=MassVolume=27 g10 cm3=2.7 g/cm3=2.7 × 1000 kg/m3=2700 kg/m3

The density of aluminium is 2.7 g/cm3 (2700 kg/m3).

Relative density

Relative density

How many times denser a substance is than water. It is a number with no unit.

Relative density = Density of the substanceDensity of water at that temperature

  • Aluminium: relative density = 2.7. It is 2.7 times as dense as water.
  • Relative density less than 1: the substance is less dense than water.

Worked example 3

A packet of cooking oil holds 1 litre (1000 mL) but has a mass of only 910 g. Is oil denser than water?

Given
Mass = 910 gVolume = 1000 mL
Find
Density of the oil

Solution

Density=910 g1000 mL=0.91 g/mL

Oil (0.91 g/mL) is less dense than water (1 g/mL). Its relative density is 0.91.

Densities of some common materials

MaterialDensity (g/cm3, about)
Air0.0012
Cork0.24
Wood (pine)0.5
Cooking oil0.91
Ice0.92
Water1.00
Sea water1.03
Glass2.5
Aluminium2.7
Iron7.9
Copper8.9
Mercury13.6
Gold19.3

Let us dig deeper: layers of the Earth

  • The Earth has layers: crust, upper mantle, lower mantle, outer core (liquid) and inner core (solid).
  • The crust, the outermost layer, is the least dense.
  • Density increases towards the centre. Deep inside, pressure and temperature are very high, so materials are more tightly packed.

Remember

  • Density = mass divided by volume.
  • SI unit: kg/m3. Also g/cm3 and g/mL.
  • Water: about 1 g/cm3 = 1000 kg/m3.
  • Density does not depend on shape or size.
Quick checkA 20 cm3 piece of glass has a mass of 50 g. Find its density.Show answer
Density=50 g20 cm3=2.5 g/cm3

7Floating and sinking

The rule

  • An object floats in a liquid if it is less dense than the liquid.
  • An object sinks if it is denser than the liquid.
  • So “lighter” and “heavier” really mean less dense and denser, for the same volume.
A glass tank of water. A cork, a wooden block, a plastic ball, an apple and a leaf float at the surface. A stone, a key, an iron nail, a glass marble and a coin lie at the bottom.corkwoodballappleleafThese floatstonekeyiron nailmarblecoinThese sink
Figure 10. Some objects float in water and some sink.
ExampleWhat happensWhy
Oil poured on waterOil floatsOil (0.91 g/mL) is less dense than water
Ice in waterIce floatsIce (0.92 g/cm3) is less dense than water
Washing riceHusk floats, rice sinksHusk is less dense; rice grains are denser
Sawdust and sand in waterSawdust floats, sand sinksSawdust is less dense; sand is denser
Iron nail in waterSinksIron (7.9 g/cm3) is denser than water
ExampleWhat happens, Why
Oil poured on waterWhat happens: Oil floats
Why: Oil (0.91 g/mL) is less dense than water
Ice in waterWhat happens: Ice floats
Why: Ice (0.92 g/cm3) is less dense than water
Washing riceWhat happens: Husk floats, rice sinks
Why: Husk is less dense; rice grains are denser
Sawdust and sand in waterWhat happens: Sawdust floats, sand sinks
Why: Sawdust is less dense; sand is denser
Iron nail in waterWhat happens: Sinks
Why: Iron (7.9 g/cm3) is denser than water
Three beakers. (a) Oil poured into water forms a separate layer on top. (b) Ice cubes float with most of each cube below the surface. (c) When rice is washed, the light husk floats while the rice grains sink to the bottom.oilwatericehuskrice(a) oil floatson water(b) ice floatson water(c) husk floats,rice sinks
Figure 11. Oil, ice and husk float on water; rice sinks.

Note. Density is not the only thing that decides floating. Shape matters too. A steel ship floats because its hollow shape holds a lot of air.

Making an egg float

  1. Put a raw egg in a glass of tap water. It sinks: the egg is denser than water.
  2. Stir in a lot of salt, spoon by spoon.
  3. The salt solution becomes denser than the egg. The egg rises and floats.
A raw egg in two glasses. (a) In tap water the egg sinks to the bottom. (b) After a lot of salt is stirred into the water, the same kind of egg floats near the top.(a) tap water:the egg sinks(b) very salty water:the egg floatsA raw egg in two glasses
Figure 12. Salt makes the water denser, so the egg floats.
  • Sea water is a little denser than river water because of its dissolved salts. Things float a bit more easily in the sea.

Ever heard of bamboo rafts?

  • Long ago, people crossed rivers and seas on bamboo rafts and wooden logs.
  • Bamboo is light and hollow, so it floats easily. Poles were tied together to make rafts.
  • Logs were hollowed out to make boats. Such boats are still used in some places.

Remember

  • Less dense than the liquid: floats.
  • Denser than the liquid: sinks.
  • Adding salt makes water denser.
Quick checkA block has a density of 0.8 g/cm3. Will it float in water? In oil of density 0.91 g/cm3?Show answer

Yes in both. 0.8 is less than 1.0 (water) and less than 0.91 (oil).

Try it yourselfSort solutes, solvents and solutions, things that float or sink in water, and substances that dissolve more or less in hot water in the Sort it out activity.

8Measuring mass

Mass

The quantity of matter in an object. Units: gram (g) and kilogram (kg). 1 kg = 1000 g.

Balance

An instrument used to measure mass. Shops and laboratories often use a digital weighing balance.

Using a digital balance (Activity)

  1. Switch on the balance. It should read zero. If not, press the tare (reset) key.
  2. Put a clean, dry watch glass (or butter paper) on the pan. Note the reading.
  3. Press tare again. The reading goes back to zero, so the watch glass is not counted.
  4. Place the object, such as a stone, on the watch glass.
  5. Read the display. This is the mass of the stone, say 16.400 g.
Three steps in weighing a stone. (a) The digital balance is switched on and reads 0.000 g. (b) A watch glass is placed on the pan and the TARE key is pressed, so the reading goes back to 0.000 g. (c) The stone is placed on the watch glass and the display shows its mass, 16 g.0.000gONTARE0.000gONTARE16.400gONTARE(a) switch on:reads zero(b) watch glass,press TARE(c) add stone:16.400 gWeighing a stone on a digital balance
Figure 13. Weighing a stone on a digital balance.
  • Tare means setting the reading to zero with a container on the pan.
  • To weigh a liquid: put an empty beaker on the pan, press tare, then pour in the liquid.

Mass and weight are different

MassWeight
MeaningQuantity of matter in an objectForce with which the Earth pulls the object
Unitgram (g), kilogram (kg)newton (N)
Changes from place to place?NoYes
Mass, Weight
MeaningMass: Quantity of matter in an object
Weight: Force with which the Earth pulls the object
UnitMass: gram (g), kilogram (kg)
Weight: newton (N)
Changes from place to place?Mass: No
Weight: Yes
  • In daily life, people say “weight” when they mean mass.
  • Most balances really measure weight, but their scales are marked in grams or kilograms.
  • A two-pan balance compares the mass of an object with known masses (see Figure 8).

Remember

  • Mass is measured with a balance, in g or kg.
  • Tare sets the reading to zero with a container on the pan.
  • Weight is a force, measured in newtons.
Quick checkA beaker reads 50.0 g. After water is poured in, it reads 150.0 g. What is the mass of the water? What is its volume?Show answer

Mass of water = 150.0 g − 50.0 g = 100.0 g. Since 1 mL of water is about 1 g, its volume is about 100 mL.

9Measuring the volume of liquids

Volume

The space taken up by an object or substance.

Units of volume

  • SI unit: cubic metre (m3), the volume of a cube with 1 m sides.
  • Smaller units: cubic decimetre (dm3) and cubic centimetre (cm3). 1 cm3 is also called 1 cc.
  • Liquids: litre (L) and millilitre (mL).
ThisEquals
1 L1 dm3 = 1000 mL
1 mL1 cm3 = 1 cc
1 m31000 L

A pack labelled 200 mL of buttermilk holds 200 cm3 of it.

Measuring cylinder

A narrow, tall, transparent cylinder, closed at the bottom, with a scale marked on it. It measures the volume of liquids.

  • Common sizes: 5, 10, 25, 50, 100, 250 and 500 mL.
  • The largest volume it can measure is its capacity.
  • The smallest volume it can measure is the volume of one small division.
Measuring cylinders of capacity 10 mL, 25 mL, 50 mL, 100 mL and 250 mL standing in a row. A magnified view of the 100 mL cylinder shows the scale between the 10 mL and 20 mL marks: it has 10 small divisions, so each small division is 1 mL.10 mL25 mL50 mL100 mL250 mL201010 divisions = 10 mLso 1 division = 1 mLMeasuring cylinders
Figure 14. Measuring cylinders, and the scale of a 100 mL cylinder.

Finding the smallest reading (Activity)

One small division=Volume between two numbered marksNumber of small divisions between them=20 mL − 10 mL10=1 mL
CapacityUsual smallest reading
10 mL or 25 mL0.1 mL
100 mL1 mL
250 mL2 mL
500 mL5 mL

Choosing the right cylinder

  • To measure 70 mL, a 50 mL cylinder needs two steps (50 mL + 20 mL). That is slow and less accurate.
  • A 250 mL or 500 mL cylinder works in one step, but its smallest reading is bigger. So it is less accurate.
  • Best choice: the 100 mL cylinder. Choose the smallest cylinder that holds the volume in one step.
  • Cylinders are narrow and tall: a small change in volume makes a big change in height. So the marks are spread out and easy to read.

Measuring 50 mL of water (Activity)

  1. Stand a clean, dry cylinder on a flat surface.
  2. Pour water slowly up to near the 50 mL mark.
  3. Add or remove a little water with a dropper until it is exact.
  4. Read with your eye level with the bottom of the curved surface.

Meniscus

The curved surface of a liquid in a narrow tube. For water it curves down in the middle.

A close-up of the scale of a measuring cylinder holding water. The water surface curves down in the middle; this curve is the meniscus. Its lowest point is on the 50 mL mark. Three eyes look at it: one above, one level with the bottom of the meniscus, and one below. Only the eye at the same level gives the correct reading, 50 mL.405060eye too higheye too loweye level:correctmeniscus(curvedsurface)read thebottom:50 mL
Figure 15. Read the bottom of the meniscus with your eye at the same level.
  • Water and other colourless liquids: read the bottom of the meniscus.
  • Coloured liquids: read the top of the meniscus, because the bottom is hard to see.
  • Eye above the level: the reading is too high. Eye below: too low.

Remember

  • 1 L = 1000 mL; 1 mL = 1 cm3.
  • Smallest reading = volume of one small division.
  • Read the bottom of the meniscus at eye level (top for coloured liquids).
Quick checkBetween the 40 mL and 50 mL marks of a cylinder there are 5 small divisions. What is its smallest reading?Show answer
One division=50 mL − 40 mL5=2 mL

10Volume of solids and finding density

Regular solids (cuboids)

Volume of a cuboid = length × width × height = l × w × h

A notebook drawn as a cuboid lying on a table with a 25 cm ruler along its front edge. Arrows mark its length l = 25 cm, its width w = 18 cm and its height (thickness) h = 2 cm.0510152025l = 25 cmw = 18 cmh = 2 cmA notebook is a cuboid
Figure 16. Measuring a notebook with a ruler.

Worked example 4

A notebook is 25 cm long, 18 cm wide and 2 cm thick. Find its volume.

Given
l = 25 cmw = 18 cmh = 2 cm
Find
Volume

Solution

Volume=l × w × h=25 cm × 18 cm × 2 cm=900 cm3

The volume of the notebook is 900 cm3.

Irregular solids: the displacement method (Activity)

  1. Fill a measuring cylinder with water to a known level, say 50 mL. This is the initial volume (A).
  2. Tie the object, such as a stone, to a thread.
  3. Lower it slowly into the water until it is fully under water.
  4. The water level rises, say to 55 mL. This is the final volume (B).
  5. Volume of the object = B − A.
Finding the volume of a stone. (a) A 100 mL measuring cylinder holds water up to the 50 mL mark. (b) A stone tied to a thread is lowered into the water and the level rises to 55 mL. The stone pushes aside 5 mL of water, so its volume is 5 cubic centimetres.102030405060708090100mL102030405060708090100mL50 mL55 mLstoneon a thread(a) water only(b) stone lowered in
Figure 17. The stone pushes aside its own volume of water.
ObjectInitial volume AFinal volume BVolume of object (B − A)
Stone50 mL55 mL5 mL = 5 cm3
ObjectInitial volume A, Final volume B, Volume of object (B − A)
StoneInitial volume A: 50 mL
Final volume B: 55 mL
Volume of object (B − A): 5 mL = 5 cm3
  • The object pushes aside (displaces) water equal to its own volume.
  • A volume found in mL can be written in cm3 for a solid, since 1 mL = 1 cm3.
  • The object must sink fully and must not soak up water.

Finding density

Worked example 5

The stone has a mass of 16.400 g (from the balance) and a volume of 5 cm3 (from displacement). Find its density.

Given
Mass = 16.400 gVolume = 5 cm3
Find
Density

Solution

Density=MassVolume=16.400 g5 cm3=3.28 g/cm3

The density of the stone is 3.28 g/cm3. It is denser than water, so it sinks.

Worked example 6

Suppose the notebook (volume 900 cm3) has a mass of 540 g. Find its density. Will it float?

Given
Mass = 540 gVolume = 900 cm3
Find
Density

Solution

Density=540 g900 cm3=0.6 g/cm3

Density is 0.6 g/cm3. This is less than water, so the closed notebook floats at first.

Rearranging the formula

To findUse
DensityMassVolume
MassDensity × Volume
VolumeMassDensity

Remember

  • Cuboid volume = l × w × h.
  • Irregular solid: volume = final level − initial level.
  • Density = mass of the object divided by its volume.
Quick checkWater stands at 30 mL. A metal key is lowered in and the level rises to 33 mL. The key has a mass of 26.7 g. Find its volume and density.Show answer

Volume = 33 mL − 30 mL = 3 mL = 3 cm3.

Density=26.7 g3 cm3=8.9 g/cm3

11Temperature, pressure and density

Temperature and density

  • When a substance is heated, its particles move faster and spread apart.
  • Its volume increases, but its mass stays the same.
  • Density = mass divided by volume. So density decreases on heating and increases on cooling.
  • This is true for solids, liquids and gases.

Hot air rises

  • Hot air is less dense than the cool air around it. So hot air rises.
  • A hot-air balloon uses a burner to heat the air inside it.
  • The hot air inside is less dense than the outside air, so the balloon rises.
  • When the air inside cools, the balloon comes down.
Hot-air balloons in the sky. A burner under the big balloon heats the air inside it. Hot air expands and becomes less dense than the cooler air outside, so it rises and lifts the balloon.hot air inside:less dense, risesburner heats the aircooler air outside is denser
Figure 18. Hot air is less dense, so the balloon rises.

Pressure and density

StateEffect of more pressureDensity change
GasParticles pushed much closer; volume fallsLarge increase
LiquidHardly squeezed (nearly incompressible)Very small
SolidParticles already very closeNegligible
StateEffect of more pressure, Density change
GasEffect of more pressure: Particles pushed much closer; volume falls
Density change: Large increase
LiquidEffect of more pressure: Hardly squeezed (nearly incompressible)
Density change: Very small
SolidEffect of more pressure: Particles already very close
Density change: Negligible

Example: a pump squeezes a lot of air into a bicycle tyre. The air inside is denser than the air outside.

Why does ice float? Water is special

  • Water is densest at 4 °C.
  • When water freezes at 0 °C, its particles arrange in a pattern that takes up more space. Water expands as it turns into ice.
  • The same mass in a larger volume means lower density. So ice is less dense than water and floats.
  • That is why a glass bottle full of water can crack in a freezer.
A lake in very cold weather, cut open. A layer of ice floats on top. Below it the water is at 1 degree Celsius near the ice and gets warmer with depth. The densest water, at 4 degrees Celsius, stays at the bottom, where fish stay alive.ice floats and forms a lidwater at 1 °Cwater at 2 to 3 °Cdensest water, 4 °C,sinks to the bottomA lake in winter
Figure 19. Ice floats on a lake; the densest water (4 °C) stays at the bottom.
  • In winter, ice forms a floating layer on lakes and ponds.
  • The ice keeps the water below from freezing. Fish and other animals survive in the water underneath.

Remember

  • Heating: volume up, mass same, density down.
  • Hot air rises because it is less dense.
  • Pressure changes the density of gases a lot, liquids and solids very little.
  • Water is densest at 4 °C; ice floats on water.
Quick checkWhy do hot-air balloons fly better on cold mornings?Show answer

The outside air is cold and dense. The difference in density between the hot air inside and the cold air outside is larger, so the balloon rises more easily.

Test yourselfTake the 16-question practice quiz on this chapter.