Chapter 5 · Science

Measurement of Length and Motion

How we measure lengths with standard units, how to use a scale correctly, and how to describe position and the different kinds of motion.

At a glance

Formulas at a glance

Every unit and rule of this chapter on one card. Revise it, then try them in the Measure it lab below.

Topic 2 · Standard units of length

Units of length

10 mm = 1 cm100 cm = 1 m1000 m = 1 km

mm is millimetre, cm is centimetre, m is metre (the SI unit) and km is kilometre. Join the steps to go further:

1 km=1000 m=1000 × 100 cm=100 000 cm

Topic 3 · Changing from one unit to another

Bigger unit to smaller unit

multiply

km to m: × 1000. m to cm: × 100. cm to mm: × 10. A rope 3.5 m long:

3.5 m=3.5 × 100 cm=350 cm

Topic 3 · Changing from one unit to another

Smaller unit to bigger unit

divide

mm to cm: divide by 10. cm to m: divide by 100. m to km: divide by 1000. A cloth 750 cm long:

750 cm=750100 m=7.5 m

Topic 4 · The correct way to measure length

Scale with a broken end

Length = end − start

  • endreading at the far endcm
  • startreading where it beginscm

An eraser from the 2.0 cm mark to the 6.5 cm mark:

Length=6.5 cm − 2.0 cm=4.5 cm

Topic 4 · The correct way to measure length

Smallest mark on a ruler

1 small division = 1 mm

Each centimetre has 10 small parts, so a 15-cm ruler can measure to the nearest millimetre. Keep your eye straight above the mark.

Topic 6 · Describing position

Describing position

position = distance + direction

Always say from which reference point. The market is 1 km west of the school; Riya’s home is 2 km east of it.

Interactive simulator

Measure it lab

Read the length of a pencil, a leaf, an eraser or a straw on a ruler. Then measure a curved line with a thread.

End minus start
–
Same length
–
What to try
Tap a thing
Where does it start?
Where is your eye?

What is happening

Try this

  1. Tap the Pencil. Find where it ends on the ruler, then press Show the reading. Were you right?
  2. Tap the Leaf, the Eraser and the Straw. Guess each length first, then check it.
  3. Choose Starts at 2 cm and press Show the reading. Why do we take away 2 cm?
  4. Choose Eye to the side. Does the reading change? Then go back to Eye straight above.
  5. Choose Curved line. Press Lay the thread, then Straighten it. Which is longer, the curve or the straight way from A to B? Try the Arch too.