Chapter 5 · Science

Measurement of Length and Motion

How we measure lengths with standard units, how to use a scale correctly, and how to describe position and the different kinds of motion.

Done reading? Try the Measure it lab activity on this chapter.
In this chapter 8 topics
  1. 1How do we measure?
  2. 2Standard units of length
  3. 3Changing from one unit to another
  4. 4The correct way to measure length
  5. 5Measuring a curved line
  6. 6Describing position
  7. 7Moving things: motion and rest
  8. 8Types of motion

1How do we measure?

How long is your desk? How tall is the classroom door? How far is your school from home? To answer these questions, we have to measure.

Measurement

Measurement means comparing something we do not know with a fixed amount that we do know. This fixed amount is called the unit.

Every measurement has two parts: a number and a unit. If a rope is 3 metres long, 3 is the number and metre is the unit. Saying only “the rope is 3” tells us nothing. Is it 3 metres, 3 hands or 3 steps?

Measuring with parts of the body

Long ago, people used parts of their own body to measure length. Some of these are still used today when there is no scale nearby.

Body unitWhat it is
Finger widthThe width of one finger
HandspanThe distance from the tip of the thumb to the tip of the little finger, with the hand spread wide
CubitThe length from the elbow to the tip of the middle finger
FootThe length of a person’s foot
Pace (step)The length of one step when you walk

The problem with body units

Two friends measure the same bench with their handspans. One friend has a big hand and counts 8 handspans. The other has a small hand and counts 10 (see Figure 1).

The same bench measured with handspans by two people. A big hand fits along it 8 times; a small hand fits 10 times.12345678Big hand: 8 handspans12345678910Small hand: 10 handspans
Figure 1. The same bench gives 8 big handspans but 10 small ones.

The bench did not change. The unit changed, because hands come in different sizes. So body units do not give the same answer for everyone.

Remember

  • To measure is to compare something with a fixed unit.
  • A measurement = a number + a unit.
  • Handspan, cubit, foot and pace change from person to person, so we cannot depend on them.
Quick checkAsha says her table is 6 handspans long. Her younger brother measures the same table and gets 8 handspans. Who is wrong?Show answer

Neither of them. Their hands are of different sizes, so they get different numbers for the same table. This is why we need a unit that is the same for everyone.

2Standard units of length

Shopkeepers, builders and tailors need units that mean the same thing everywhere. Such units are called standard units.

Standard unit

A standard unit is a fixed unit of measurement. It is the same for everyone, everywhere. The standard unit of length is the metre (symbol m).

A short history

  • In ancient India, people measured length in units such as the angula (about one finger width) and the dhanusha. For long distances they used the yojana.
  • Many other lands used the cubit, the foot and the yard. These were different in different places. This caused confusion in trade.
  • In the 1790s, France made the metric system. Its unit of length was the metre.
  • In 1960, scientists from many countries agreed on one set of standard units. These are the SI units (International System of Units). The SI unit of length is the metre. India uses SI units.

Bigger and smaller units

Some lengths are too small to measure easily in metres. Some are too large. So we also use units made from the metre.

Unit (symbol)How it is relatedUsed for
millimetre (mm)10 mm = 1 cmVery small lengths: thickness of a coin
centimetre (cm)100 cm = 1 mSmall objects: pencil, book
metre (m)SI unitRoom, cloth, height of a person
kilometre (km)1 km = 1000 mLong distances: between towns

The right unit keeps numbers short and easy to read. Delhi to Mumbai is about 1400 km. In centimetres, the same distance is 14,00,00,000 cm. That is nine digits!

Remember

  • The SI unit of length is the metre (m).
  • 10 mm = 1 cm, 100 cm = 1 m, 1000 m = 1 km.
  • Pick the unit that suits the size of what you measure.
Quick checkWhich unit would you use for (a) the length of your thumb nail, (b) the length of a train journey?Show answer

(a) millimetres (or centimetres); (b) kilometres.

3Changing from one unit to another

We often need to change a length from one unit to another. Two simple rules do it (see Figure 2):

  • From a bigger unit to a smaller unit: multiply. You will get more of the smaller units.
  • From a smaller unit to a bigger unit: divide. You will get fewer of the bigger units.
The units kilometre, metre, centimetre and millimetre in a row. Going right, to a smaller unit, multiply by 1000, 100 and 10. Going left, to a bigger unit, divide by 1000, 100 and 10.kmkilometremmetrecmcentimetremmmillimetre× 1000divide by 1000× 100divide by 100× 10divide by 10Bigger unit to smaller unit: multiplySmaller unit to bigger unit: divide
Figure 2. Moving right (to a smaller unit) you multiply; moving left (to a bigger unit) you divide.

Think of money. One 100-rupee note is the same as 100 one-rupee coins. A big unit is the same as many small units.

To changeDo this
km to mmultiply by 1000
m to cmmultiply by 100
cm to mmmultiply by 10
mm to cmdivide by 10
cm to mdivide by 100
m to kmdivide by 1000

Worked example 1

A rope is 3.5 m long. Express its length in centimetres.

Given
3.5 m
Find
length in cm

Solution

  1. We go from metres (bigger) to centimetres (smaller), so we multiply.
  2. Each metre has 100 cm, so we multiply by 100.
3.5 m=3.5 × 100 cm=350 cm

The rope is 350 cm long.

Worked example 2

A cloth is 750 cm long. Express its length in metres.

Given
750 cm
Find
length in m

Solution

  1. We go from centimetres (smaller) to metres (bigger), so we divide.
  2. Every 100 cm make 1 m, so we divide by 100.
750 cm=750100 m=7.5 m

The cloth is 7.5 m long.

Worked example 3

A girl walks 4500 m to reach a park. How many kilometres is this?

Given
4500 m
Find
distance in km

Solution

  1. We go from metres (smaller) to kilometres (bigger), so we divide.
  2. Every 1000 m make 1 km, so we divide by 1000.
4500 m=45001000 km=4.5 km

The distance is 4.5 km.

Worked example 4

An eraser is 45 mm long. What is its length in centimetres?

Given
45 mm
Find
length in cm

Solution

  1. We go from millimetres (smaller) to centimetres (bigger), so we divide.
  2. Every 10 mm make 1 cm, so we divide by 10.
45 mm=4510 cm=4.5 cm

The eraser is 4.5 cm long.

A useful chain to remember: 1 km = 1000 m = 1000 × 100 cm = 100 000 cm.

Remember

  • Big unit to small unit: multiply.
  • Small unit to big unit: divide.
  • 1 km = 1000 m = 100 000 cm.
Quick checkExpress 2.4 km in metres and 260 cm in metres.Show answer

Kilometre to metre is big to small, so multiply by 1000:

2.4 km=2.4 × 1000 m=2400 m

Centimetre to metre is small to big, so divide by 100:

260 cm=260100 m=2.6 m

4The correct way to measure length

A 15-cm scale (ruler) has long marks for centimetres. Between them are small marks. Each centimetre has 10 small parts, so each small part is 1 mm. This is the smallest length the ruler can measure.

Rules for measuring with a scale

  1. Place the scale along the length you are measuring. It should touch the object, not lie at a slant.
  2. Put one end of the object exactly at the zero mark of the scale.
  3. Read the mark at the other end. Keep your eye exactly above that end.
A pencil lies on a scale with one end at zero and the other at 6 cm. Three eyes look at the end of the pencil. Eye B is straight above it and reads 6 cm correctly. Eyes A and C look from the sides and line the end up with wrong marks.01234567891011121314A: wrongB: rightC: wrong
Figure 3. Only eye B, straight above the end of the pencil, gives the right reading (6 cm).

Suppose you look from the left or the right, at a slant. The end of the object then seems to line up with a different mark. You get a wrong reading. So always keep your eye straight above the point you are reading.

When the zero mark is broken or worn out

Old scales often have a broken end, or the zero mark has rubbed off. You can still use them:

  1. Place one end of the object at any clear full mark, such as 1 cm or 2 cm.
  2. Read the mark at the other end.
  3. Subtract the starting mark from the end mark.
A scale with its zero end broken off. An eraser lies on it from the 2.0 cm mark to the 6.5 cm mark, so its length is 4.5 cm.12345678910111213starts at 2.0 cmends at 6.5 cmLength = 6.5 cm − 2.0 cm = 4.5 cm
Figure 4. Measuring an eraser on a scale with a broken end.

In Figure 4, the eraser starts at 2.0 cm, not at zero. So we take away the 2.0 cm that the eraser does not cover:

Length of eraser=reading at end − reading at start=6.5 cm − 2.0 cm=4.5 cm

Measuring something taller or longer than the scale

For your friend’s height or the length of a room, use a measuring tape or a metre scale. To measure a height:

  1. Your friend stands straight against a wall.
  2. Place a book flat on their head, touching the wall.
  3. Mark the wall just under the book.
  4. Measure from the floor to the mark.

Remember

  • Each small part on a ruler is 1 mm.
  • Keep the scale along the object and start from the zero mark.
  • Read with your eye exactly above the mark.
  • If zero is broken: length = end reading − start reading.
Quick checkOn a scale with a broken end, one end of a pencil is at the 1.0 cm mark and the other at the 9.3 cm mark. How long is the pencil?Show answer

The pencil starts at 1.0 cm, so take that away from the end reading:

Length=9.3 cm − 1.0 cm=8.3 cm
Try it yourselfRead the length of a pencil on a ruler, see why your eye must be straight above the mark, and measure a curved line with a thread, in the Measure it lab.

5Measuring a curved line

A scale is straight. It cannot bend along a curved line, such as a wavy line on paper, the edge of a bangle or the rim of a cup. So we use a thread instead.

Top: a red thread laid along a wavy curve on paper, with its ends marked A and B. Bottom: the same thread pulled straight along a scale, from the zero mark, so its length can be read.AB1. Lay a thread along the curve; mark A and B01234567891011121314152. Straighten the thread on a scale and read it
Figure 5. Measuring a curved line with a thread.

Steps

  1. Make a knot or an ink mark near one end of a thread. Hold that mark at the start of the curved line (A).
  2. Lay the thread along the curve, a little at a time. Keep it on the line with your finger. Do not stretch it.
  3. Mark the thread where the curve ends (B).
  4. Pull the thread straight along a scale, with the first mark at zero. The reading at the second mark is the length of the curve.

Use a thread that does not stretch. A rubber band or elastic would give a wrong length. A tailor’s measuring tape works the same way. It bends, so you can wrap it straight round your waist or a tree trunk.

Remember

  • A straight scale cannot measure a curved line directly.
  • Lay a thread along the curve, mark the ends, straighten it on a scale.
  • The thread must not stretch.
Quick checkWhy would a rubber band be a bad choice for measuring a curved line?Show answer

A rubber band stretches. Its length changes when you pull it, so the reading would be wrong.

6Describing position

A friend asks where the post office is. You might say: “It is 500 m from the bus stop, towards the river.” You told its distance and its direction from something you both know: the bus stop.

Reference point

A reference point is a fixed place or object that we describe other positions from. We give the position of an object by its distance and direction from the reference point.

A straight road running west to east. The school is the reference point. The market is 1 km west of the school, and Riya’s home is 2 km east of the school. Small stones mark each kilometre.2 km1 km1 km2 kmSchool (reference point)MarketRiya’s homeWestEast
Figure 6. Using the school as the reference point.

In Figure 6, the market is 1 km west of the school. Riya’s home is 2 km east of the school. Distance alone is not enough. A place 1 km from the school could be on either side.

Milestones on highways work in the same way. A stone that says “Agra 35 km” tells you how far you are from Agra. Here Agra is the reference point.

You can choose any handy object as the reference point. But the way you describe a position depends on that choice. The market is 1 km from the school, but 3 km from Riya’s home.

Remember

  • Position = distance + direction from a reference point.
  • A reference point is a fixed object or place we measure from.
  • If you change the reference point, the description of the position changes too.
Quick checkIn Figure 6, how far is Riya’s home from the market, and in which direction?Show answer

3 km east of the market. It is 1 km from the market to the school, and 2 km more to her home.

7Moving things: motion and rest

A flying bird, a bus on the road and the hands of a clock are all moving. A tree, a house and a parked car are not. How do we decide?

Motion and rest

An object is in motion if its position changes with time, compared with a reference point. If its position does not change with time, it is at rest.

Think of a bus going past a school. Every minute, its distance from the school changes. So the bus is in motion compared with the school. The school stays in the same place compared with a nearby tree. So the school is at rest.

It depends on the reference point

Look at the passenger in Figure 7. The distance between the passenger and the driver stays the same. So, compared with the driver, the passenger is at rest. But the distance from the tree outside keeps growing. So, compared with the tree, the passenger is moving.

A bus on a road, shown twice. The distance between the passenger and the driver stays the same, so the passenger is at rest compared with the driver. The distance from the tree to the passenger grows, so the passenger is moving compared with the tree.Earlierstays the samefrom the treeA little laterstays the samefrom the tree
Figure 7. The passenger is at rest compared with the driver, but moving compared with the tree.

So whether something is at rest or in motion depends on the reference point we choose.

ObjectCompared withRest or motion?
Passenger in a moving trainThe seatRest
Passenger in a moving trainA station platformMotion
A book on a tableThe wall of the roomRest
A cyclist on a roadA lamp postMotion

Remember

  • Motion: position changes with time, compared with a reference point.
  • Rest: position does not change with time.
  • The same object can be at rest compared with one thing and moving compared with another.
Quick checkRavi is sitting in a moving car. Is he at rest or in motion?Show answer

Both answers can be right. Compared with the car and its seats, he is at rest. Compared with the road and the trees outside, he is in motion.

8Types of motion

Things move in different ways. We group motion by the path an object follows. The path is the line it traces as it moves.

Three kinds of motion. Linear: a car moves along a straight road. Circular: the tip of a clock’s second hand moves round a circle. Oscillatory: a pendulum swings to and fro about its middle position.Linearstraight lineCircularround a centreOscillatoryto and fro
Figure 8. Linear, circular and oscillatory motion.

Linear motion

When an object moves along a straight line, it is in linear motion. Examples: a car on a straight road, a stone dropped from a roof, and a runner in a 100 m race.

Circular motion

When an object moves along a circle, it is in circular motion. It stays the same distance from a fixed centre. Examples: the tip of a clock’s hand, a point on a ceiling fan blade, and a stone whirled round on a string.

Oscillatory motion

When an object moves to and fro (back and forth) about a middle position, it is in oscillatory motion. Examples: a swing, the pendulum of a wall clock, and a steel ruler pressed at a table edge and then let go.

Periodic motion

Some motions repeat again and again after equal gaps of time. These are called periodic motions. A clock’s pendulum takes the same time for every swing. The hands of a clock come back to the same place after a fixed time. Many circular and oscillatory motions are periodic.

TypePathExamples
LinearStraight lineTrain on a straight track, falling fruit
CircularCircle around a fixed centreTip of a clock hand, merry-go-round
OscillatoryTo and fro about a middle positionSwing, clock pendulum

Remember

  • Linear: along a straight line.
  • Circular: along a circle, same distance from the centre.
  • Oscillatory: to and fro about a middle position.
  • Periodic: repeats after equal gaps of time.
Quick checkA child on a see-saw goes up and down again and again. What type of motion is this?Show answer

Oscillatory motion. The child moves to and fro about the middle position of the see-saw.

Test yourselfTake the 16-question practice quiz on this chapter.