Light: Reflection and Refraction
How light is reflected by mirrors and bent by glass and water, and how mirrors and lenses form images.
Step-by-step answers to all 31 questions in this chapter of the NCERT textbook: the in-text questions after each section, and the exercises at the end. Each question is given exactly as it appears in the book.
In-text questions
9.2 Spherical mirrors
- Q1Define the principal focus of a concave mirror.
Answer
Send a set of rays parallel to the principal axis on to a concave mirror. After reflection, they all pass through a single point on the principal axis. That point is the mirror’s principal focus, F.
Parallel rays meet at the principal focus F after reflection. - Q2The radius of curvature of a spherical mirror is 20 cm. What is its focal length?
Answer
For a spherical mirror, the focal length is half the radius of curvature.
f=R2=20 cm2=10 cmThe focal length is 10 cm.
- Q3Name a mirror that can give an erect and enlarged image of an object.
Answer
A concave mirror, when the object is placed between its pole P and its principal focus F. The image is then virtual, erect and enlarged, and it is formed behind the mirror.
Object between P and F: the image is virtual, erect and enlarged. - Q4Why do we prefer a convex mirror as a rear-view mirror in vehicles?
Answer
A convex mirror is preferred because:
- it always forms an erect image, so the driver sees the traffic behind the right way up;
- it curves outwards, so it gives a much wider field of view than a plane mirror of the same size. The driver can see a large area behind the vehicle.
The image is smaller than the object, but this is what lets so much fit into a small mirror.
In-text questions
9.2 Mirror formula and magnification
- Q1Find the focal length of a convex mirror whose radius of curvature is 32 cm.
Answer
The centre of curvature of a convex mirror is behind it, so by the sign convention R = +32 cm.
f=R2=+32 cm2=+16 cmThe focal length is 16 cm. It is positive because the principal focus of a convex mirror lies behind the mirror.
- Q2A concave mirror produces three times magnified (enlarged) real image of an object placed at 10 cm in front of it. Where is the image located?
Answer
A real image is always inverted, so the magnification is negative: m = −3. The object is in front of the mirror, so u = −10 cm.
m=−vu−3=−v−10 cm−3=v10 cmv=−3 × 10 cm=−30 cmThe image is formed 30 cm in front of the mirror, on the same side as the object. The minus sign shows it is in front of the mirror, as a real image must be.
In-text questions
9.3 Refraction and refractive index
- Q1A ray of light travelling in air enters obliquely into water. Does the light ray bend towards the normal or away from the normal? Why?
Answer
It bends towards the normal. Water is optically denser than air: its refractive index (1.33) is greater than that of air (1.0003). Light slows down when it passes from air into water, and a ray that slows down bends towards the normal.
Light passing from air into water bends towards the normal. - Q2Light enters from air to glass having refractive index 1.50. What is the speed of light in the glass? The speed of light in vacuum is 3 × 108 m s–1.
Answer
The refractive index of a medium is the speed of light in vacuum divided by the speed of light in the medium.
n=cvv=cn=3 × 108 m s−11.50=2 × 108 m s−1The speed of light in the glass is 2 × 108 m s−1.
- Q3Find out, from Table 9.3, the medium having highest optical density. Also find the medium with lowest optical density.
Answer
The larger the refractive index of a medium, the greater its optical density.
- Highest optical density: diamond, which has the largest refractive index in the table, 2.42.
- Lowest optical density: air, which has the smallest refractive index in the table, 1.0003.
- Q4You are given kerosene, turpentine and water. In which of these does the light travel fastest? Use the information given in Table 9.3.
Answer
The refractive indices from the table are: water 1.33, kerosene 1.44 and turpentine oil 1.47. Since n = cv, light travels fastest in the medium with the smallest refractive index.
Light travels fastest in water. Working out the speeds confirms it:
vwater=3 × 108 m s−11.33≈2.26 × 108 m s−1vkerosene=3 × 108 m s−11.44≈2.08 × 108 m s−1vturpentine=3 × 108 m s−11.47≈2.04 × 108 m s−1 - Q5The refractive index of diamond is 2.42. What is the meaning of this statement?
Answer
It means that the speed of light in a vacuum is 2.42 times its speed in diamond. In other words, the ratio of the two speeds is 2.42:
n=cvdiamond=2.42So the speed of light in diamond is 3 × 108 m s−12.42 ≈ 1.24 × 108 m s−1. Diamond is an optically very dense medium.
In-text questions
9.3 Lenses and the power of a lens
- Q1Define 1 dioptre of power of a lens.
Answer
A lens whose focal length is exactly 1 m has a power of 1 dioptre (1 D). Power is the reciprocal of the focal length in metres, so
1 D=11 m=1 m−1 - Q2A convex lens forms a real and inverted image of a needle at a distance of 50 cm from it. Where is the needle placed in front of the convex lens if the image is equal to the size of the object? Also, find the power of the lens.
Answer
The image is real, so it is on the other side of the lens: v = +50 cm. It is inverted and the same size as the object, so m = −1.
m=vu−1=+50 cmuu=−50 cmThe needle is placed 50 cm in front of the lens. Now find the focal length from the lens formula:
1f=1v − 1u=150 − 1−50=150 + 150=250=125f=+25 cm=+0.25 mP=1f=10.25 m=+4 DThe power of the lens is +4 D. The needle is at twice the focal length (2F1), which is why its image at 2F2 is the same size.
Needle at 2F₁: a real, inverted image of the same size forms at 2F₂. - Q3Find the power of a concave lens of focal length 2 m.
Answer
A concave lens has a negative focal length: f = −2 m.
P=1f=1−2 m=−0.5 DThe power of the lens is −0.5 D.
End of chapter
Exercises
- Q1Which one of the following materials cannot be used to make a lens?(a) Water(b) Glass(c) Plastic(d) Clay
Answer
(d) Clay
A lens must be transparent, so that light can pass through it and be refracted. Clay is opaque: it does not let light through. Water, glass and plastic are all transparent; even a drop of water can act as a small lens.
- Q2The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should be the position of the object?(a) Between the principal focus and the centre of curvature(b) At the centre of curvature(c) Beyond the centre of curvature(d) Between the pole of the mirror and its principal focus.
Answer
(d) Between the pole of the mirror and its principal focus.
For every other position of the object, a concave mirror forms a real, inverted image. Only when the object is between P and F do the reflected rays spread apart, giving a virtual, erect and enlarged image behind the mirror.
- Q3Where should an object be placed in front of a convex lens to get a real image of the size of the object?(a) At the principal focus of the lens(b) At twice the focal length(c) At infinity(d) Between the optical centre of the lens and its principal focus.
Answer
(b) At twice the focal length
An object at 2F1, twice the focal length from the lens, forms a real, inverted image of the same size at 2F2 on the other side. An object at the principal focus gives an image at infinity, an object at infinity gives a point image at F2, and an object between O and F1 gives a virtual image.
- Q4A spherical mirror and a thin spherical lens have each a focal length of –15 cm. The mirror and the lens are likely to be(a) both concave.(b) both convex.(c) the mirror is concave and the lens is convex.(d) the mirror is convex, but the lens is concave.
Answer
(a) both concave.
By the New Cartesian sign convention, a negative focal length means the principal focus is on the left, the side the light comes from. This is true of a concave mirror, whose focus is in front of it. It is also true of a concave lens: after passing through it, rays parallel to the principal axis spread out as if they came from F1, on the left. A convex mirror and a convex lens both have positive focal lengths.
- Q5No matter how far you stand from a mirror, your image appears erect. The mirror is likely to be(a) only plane.(b) only concave.(c) only convex.(d) either plane or convex.
Answer
(d) either plane or convex.
A plane mirror always forms an erect image of the same size, and a convex mirror always forms an erect, smaller image, wherever you stand. A concave mirror gives an erect image only when you are very close to it, between P and F; farther away, the image is inverted.
- Q6Which of the following lenses would you prefer to use while reading small letters found in a dictionary?(a) A convex lens of focal length 50 cm.(b) A concave lens of focal length 50 cm.(c) A convex lens of focal length 5 cm.(d) A concave lens of focal length 5 cm.
Answer
(c) A convex lens of focal length 5 cm.
To read small letters we need an enlarged, erect image, which a convex lens gives when the letters are within its focal length: it works as a magnifying glass. A concave lens always makes things look smaller. Of the two convex lenses, the one with the shorter focal length (5 cm) has the greater power, so it magnifies more.
- Q7We wish to obtain an erect image of an object, using a concave mirror of focal length 15 cm. What should be the range of distance of the object from the mirror? What is the nature of the image? Is the image larger or smaller than the object? Draw a ray diagram to show the image formation in this case.
Answer
- Range of distance: the object must be between the pole and the principal focus, that is, less than 15 cm from the mirror (more than 0 cm and less than 15 cm).
- Nature: the image is virtual and erect, formed behind the mirror.
- Size: the image is larger than the object.
Object between P and F (here 6 cm from a mirror of focal length 15 cm): the image is virtual, erect and enlarged. - Q8Name the type of mirror used in the following situations.(a) Headlights of a car.(b) Side/rear-view mirror of a vehicle.(c) Solar furnace.Support your answer with reason.
Answer
(a) Concave mirror. The bulb is placed at the principal focus of the mirror, so the reflected light comes out as a strong, parallel beam that lights up the road far ahead.
(b) Convex mirror. It always gives an erect image, and because it curves outwards, it shows a wide area of the traffic behind the vehicle.
(c) Concave mirror. A large concave mirror brings the sunlight falling on it together at its focus. The energy is concentrated in a small region, which becomes very hot.
- Q9One-half of a convex lens is covered with a black paper. Will this lens produce a complete image of the object? Verify your answer experimentally. Explain your observations.
Answer
Yes, the lens still forms a complete image of the object, but the image is less bright.
Experiment. Fix a convex lens on a stand and place a lighted candle on one side of it, farther away than its focal length. Move a white screen on the other side until a sharp image of the flame is seen. Now cover the lower half of the lens with black paper and look at the screen again.
Observation. The whole flame is still seen on the screen, in the same place and of the same size, but it is fainter than before.
Explanation. Every point of the object sends rays to every part of the lens. The rays from any point that pass through the uncovered half still meet at the image of that point, so every point of the object is imaged. Only half as much light reaches the screen, so the image is dimmer.
Rays from A that pass through the uncovered half still meet at A′. The image is complete but fainter. - Q10An object 5 cm in length is held 25 cm away from a converging lens of focal length 10 cm. Draw the ray diagram and find the position, size and the nature of the image formed.
Answer
A converging lens is a convex lens, so f = +10 cm. Also u = −25 cm and h = +5 cm.
Lens formula:
1v − 1u=1f1v=1f + 1u=110 + 1−25=110 − 125=5 − 250=350v=503 cm≈+16.7 cmPut v = 503 cm and u = −25 cm into the magnification:
m=vu=503 × (−25)=−23h′=m × h=−23 × 5 cm≈−3.3 cmThe image is formed about 16.7 cm from the lens, on the other side. Its height is about 3.3 cm. It is real, inverted and smaller than the object. This matches the object being beyond 2F1: the image is between F2 and 2F2.
Object beyond 2F₁: the image is between F₂ and 2F₂, real, inverted and diminished. - Q11A concave lens of focal length 15 cm forms an image 10 cm from the lens. How far is the object placed from the lens? Draw the ray diagram.
Answer
For a concave lens, f = −15 cm. A concave lens always forms a virtual image on the same side as the object, so v = −10 cm.
Lens formula:
1v − 1u=1f1u=1v − 1f=1−10 − 1−15=−110 + 115=−3 + 230=−130u=−30 cmThe object is placed 30 cm from the lens.
The image is virtual, erect and diminished, 10 cm from the lens on the object’s side. - Q12An object is placed at a distance of 10 cm from a convex mirror of focal length 15 cm. Find the position and nature of the image.
Answer
For a convex mirror, f = +15 cm. The object is in front, so u = −10 cm.
Mirror formula:
1v + 1u=1f1v=1f − 1u=115 − 1−10=115 + 110=2 + 330=530=16v=+6 cmm=−vu=−6 cm−10 cm=+0.6The image is 6 cm behind the mirror. It is virtual and erect (positive v and positive m), and smaller than the object.
A convex mirror forms a virtual, erect, diminished image behind it. - Q13The magnification produced by a plane mirror is +1. What does this mean?
Answer
Magnification is m = h′h.
- The positive sign means the image is virtual and erect.
- The value 1 means h′ = h: the image is the same size as the object.
Since m = −vu = +1, v = −u: the image is as far behind the mirror as the object is in front of it.
- Q14An object 5.0 cm in length is placed at a distance of 20 cm in front of a convex mirror of radius of curvature 30 cm. Find the position of the image, its nature and size.
Answer
For a convex mirror, R = +30 cm, so f = R2 = +15 cm. Also u = −20 cm and h = +5.0 cm.
Mirror formula:
1v + 1u=1f1v=1f − 1u=115 − 1−20=115 + 120=4 + 360=760v=607 cm≈+8.6 cmPut v = 607 cm and u = −20 cm into the magnification:
m=−vu=−607 cm−20 cm=607 × 20=37≈+0.43h′=m × h=37 × 5.0 cm=157 cm≈+2.1 cmThe image is about 8.6 cm behind the mirror. It is virtual and erect, and about 2.1 cm tall, smaller than the object.
The image is behind the mirror, between P and F: virtual, erect and diminished. - Q15An object of size 7.0 cm is placed at 27 cm in front of a concave mirror of focal length 18 cm. At what distance from the mirror should a screen be placed, so that a sharp focussed image can be obtained? Find the size and the nature of the image.
Answer
For a concave mirror, f = −18 cm. Also u = −27 cm and h = +7.0 cm.
Mirror formula:
1v + 1u=1f1v=1f − 1u=1−18 − 1−27=−118 + 127=−3 + 254=−154v=−54 cmm=−vu=−−54 cm−27 cm=−2h′=m × h=−2 × 7.0 cm=−14 cmThe screen should be placed 54 cm in front of the mirror. The image is 14 cm tall: real, inverted and enlarged (twice the size of the object). The object is between F and C, so the image forms beyond C, as expected.
Object between F and C: a real, inverted, enlarged image forms beyond C. - Q16Find the focal length of a lens of power – 2.0 D. What type of lens is this?
Answer
f=1P=1−2.0 D=−0.5 m=−50 cmThe focal length is −0.5 m, that is, −50 cm. The power and the focal length are negative, so it is a concave (diverging) lens.
- Q17A doctor has prescribed a corrective lens of power +1.5 D. Find the focal length of the lens. Is the prescribed lens diverging or converging?
Answer
f=1P=1+1.5 D≈+0.67 m≈+66.7 cmThe focal length is about 0.67 m (66.7 cm). The power is positive, so the lens is a converging (convex) lens.