Chapter 9 · Physics

Light: Reflection and Refraction

How light is reflected by mirrors and bent by glass and water, and how mirrors and lenses form images.

Revising? See every formula in this chapter on one page, and try the simulator.
In this chapter 10 topics
  1. 1Reflection of light
  2. 2Spherical mirrors
  3. 3Images formed by a concave mirror
  4. 4Images formed by a convex mirror
  5. 5Sign convention, mirror formula and magnification
  6. 6Refraction of light
  7. 7Refractive index
  8. 8Spherical lenses
  9. 9Images formed by lenses
  10. 10Lens formula, magnification and power

1Reflection of light

We see a lamp or the Sun because they give out their own light. We see most other things, such as a book or a tree, because they send back part of the light that falls on them. When that light enters our eyes, we see the object.

Light travels in straight lines. This is why a small source of light, such as a torch, casts a sharp shadow of an opaque object. A very narrow beam of light, drawn as a straight line with an arrow on it, is called a ray of light.

What is reflection?

When light falls on a surface and bounces back into the medium it came from, we say it is reflected. Smooth, shiny surfaces, such as mirrors and polished metal, send back almost all the light that strikes them.

Figure 1 shows the words used to describe reflection. The ray that falls on the mirror is the incident ray, and the point where it meets the mirror is the point of incidence. The ray that bounces back is the reflected ray. The normal is a line drawn at right angles to the mirror at the point of incidence.

Reflection at a plane mirror. The incident ray and the reflected ray make equal angles, i and r, with the normal drawn at the point of incidence.irNormalIncident rayReflected rayMirrorPoint of incidence
Figure 1. Reflection at a plane mirror. The angle of incidence, i, is equal to the angle of reflection, r.
  • The angle of incidence, i, is the angle between the incident ray and the normal.
  • The angle of reflection, r, is the angle between the reflected ray and the normal.

Laws of reflection

  1. The angle of incidence is equal to the angle of reflection.
  2. The incident ray, the normal to the mirror at the point of incidence and the reflected ray all lie in the same plane.

These laws hold for every kind of reflecting surface, flat or curved.

Image formed by a plane mirror

Stand in front of a plane (flat) mirror and you see your image behind it. Rays from your face are reflected by the mirror, and the reflected rays seem to come from a point behind the mirror (Figure 2). They do not really meet there.

An object in front of a plane mirror, and its image. The reflected rays seem to come from a point behind the mirror, where the image is formed. The image is as far behind the mirror as the object is in front of it.ObjectImageddMirror
Figure 2. The image in a plane mirror. The reflected rays only seem to come from the image, so the image is virtual.

Real and virtual images

A real image is formed where reflected (or refracted) rays actually meet, so it can be caught on a screen. A virtual image is formed where the rays only seem to come from, so it cannot be caught on a screen.

The image formed by a plane mirror is:

  • virtual and erect (the right way up);
  • the same size as the object;
  • as far behind the mirror as the object is in front of it;
  • laterally inverted: your right hand looks like the left hand of your image.

Remember

  • Angles of incidence and reflection are measured from the normal, not from the mirror.
  • A real image can be caught on a screen. A virtual image cannot.
  • A plane mirror forms a virtual, erect image of the same size, as far behind the mirror as the object is in front.
Quick checkA ray of light falls on a plane mirror, making an angle of 30° with the surface of the mirror. What is the angle of reflection?Show answer

60°. The angle of incidence is measured from the normal, which is at 90° to the mirror. So the angle of incidence is 90° − 30° = 60°, and the angle of reflection is equal to it.

2Spherical mirrors

Look at your face in the inside of a shiny steel spoon, then in the back of it. The two images look very different. The spoon is a curved mirror. Mirrors whose reflecting surfaces are parts of a sphere are called spherical mirrors.

  • A concave mirror reflects light from its inner surface, which curves inwards, towards the centre of the sphere. The inside of a spoon acts like a concave mirror.
  • A convex mirror reflects light from its outer surface, which bulges outwards. The back of a spoon acts like a convex mirror.
A concave mirror is part of a hollow sphere whose centre is C. Light falls on it from the left.CReflecting surface curves inwardsConcave mirror
A convex mirror is part of a hollow sphere whose centre is C. Light falls on it from the left.CReflecting surface bulges outwardsConvex mirror
Figure 3. A spherical mirror is part of a hollow sphere. The hatched side is the back of the mirror.

Words used for spherical mirrors

  • Pole (P): the centre of the reflecting surface of the mirror.
  • Centre of curvature (C): the centre of the sphere of which the mirror is a part. It is in front of a concave mirror and behind a convex mirror.
  • Radius of curvature (R): the radius of that sphere. It is the distance from the pole to the centre of curvature.
  • Principal axis: the straight line through the pole and the centre of curvature. It meets the mirror at right angles at the pole.
  • Aperture: the width of the reflecting surface of the mirror.
The parts of a concave mirror: the pole P, the centre of curvature C, the principal focus F halfway between them, the principal axis through P and C, the radius of curvature R from P to C, the focal length f from P to F, and the aperture.CFPRadius of curvature, RFocal length, fAperturePrincipal axis
Figure 4. The parts of a concave mirror. F lies halfway between P and C.

Principal focus and focal length

Let rays of light parallel to the principal axis fall on a concave mirror. After reflection, they all meet at one point on the principal axis. On a convex mirror, the same rays spread out after reflection, as if they were coming from one point behind the mirror (Figure 5).

Rays parallel to the principal axis fall on a concave mirror and, after reflection, meet at the principal focus F.PFCConcave mirror: the rays meet at F
Rays parallel to the principal axis fall on a convex mirror and, after reflection, spread out as if they came from the principal focus F behind the mirror.PFCConvex mirror: the rays seem to come from F
Figure 5. A concave mirror brings parallel rays together. A convex mirror spreads them out.

Principal focus

The principal focus (F) of a concave mirror is the point on the principal axis where rays parallel to the axis meet after reflection. For a convex mirror, it is the point on the principal axis from which such rays seem to come after reflection. The distance from the pole to the principal focus is the focal length, f.

Because it brings rays together, a concave mirror is also called a converging mirror. A convex mirror spreads rays apart, so it is a diverging mirror.

You can see this with sunlight. Hold a concave mirror so that it faces the Sun, and move a sheet of paper in front of it until the reflected light makes a small, sharp, bright spot. That spot is an image of the Sun, formed at the principal focus. Hold the paper there for a few minutes and it may start to burn, because the light energy is concentrated in that spot. The distance from the mirror to the spot is roughly the focal length. Never look straight at the Sun, or at its reflection in a mirror.

Radius of curvature and focal length

For a spherical mirror with a small aperture, the principal focus lies halfway between the pole and the centre of curvature. So the radius of curvature is twice the focal length.

Formula

R = 2f

where

  • Rradius of curvaturemetre (m), often given in cm
  • ffocal lengthmetre (m), often given in cm

Worked example 1

A concave mirror has a radius of curvature of 24 cm. Find its focal length.

Given
R = 24 cm
Find
Focal length, f

Solution

f=R2=24 cm2=12 cm

The focal length of the mirror is 12 cm.

Remember

  • A concave mirror curves inwards and brings parallel rays together. A convex mirror bulges outwards and spreads them apart.
  • For a mirror of small aperture, F lies halfway between P and C, so R = 2f.
  • The principal axis meets the mirror at right angles at its pole.
Quick checkA concave mirror has a focal length of 18 cm. How far from the mirror is its centre of curvature?Show answer
R=2f=2 × 18 cm=36 cm

The centre of curvature is 36 cm in front of the mirror.

3Images formed by a concave mirror

A concave mirror can form images that are larger or smaller than the object, real or virtual, depending on where the object is placed. To find the image, we draw a ray diagram.

Drawing ray diagrams

Every point of an object sends out rays in all directions. We pick at least two rays from the top of the object whose paths after reflection we know. The point where they meet after reflection is the image of the top of the object. If they do not actually meet, the image is where they seem to come from. Four rays are easy to draw (Figure 6):

  1. A ray parallel to the principal axis passes through the principal focus F after reflection.
  2. A ray passing through the principal focus comes out parallel to the principal axis after reflection.
  3. A ray passing through the centre of curvature, or heading straight out from it, falls on the mirror along the normal, so it is reflected back along the same path.
  4. A ray falling on the pole at an angle is reflected at the same angle on the other side of the principal axis, because the principal axis is the normal at the pole.
A ray parallel to the principal axis passes through F after reflection.PFC(i) Parallel ray
A ray through F comes out parallel to the principal axis.PFC(ii) Ray through F
A ray through C is reflected back along the same path.PFC(iii) Ray through C
A ray hitting the pole is reflected at an equal angle on the other side of the axis.PFC(iv) Ray to the pole
Figure 6. Four rays whose paths after reflection from a concave mirror are easy to draw.

Six positions of the object

Figure 7 shows the image for six positions of the object, from very far away to very close to the mirror. The table sums them up.

Concave mirror, object at infinity: the image is at F, highly diminished, real and inverted.PFC(a) At infinity
Concave mirror, object beyond C: the image is between F and C, diminished, real and inverted.PFCAA′BB′(b) Beyond C
Concave mirror, object at C: the image is at C, the same size, real and inverted.PFCAA′(c) At C
Concave mirror, object between C and F: the image is beyond C, enlarged, real and inverted.PFCAA′BB′(d) Between C and F
Concave mirror, object at F: the image is at infinity, highly enlarged, real and inverted.PFCA(e) At F
Concave mirror, object between P and F: the image is behind the mirror, enlarged, virtual and erect.PFCAA′BB′(f) Between P and F
Figure 7. Images formed by a concave mirror. Solid violet arrows are real images; the dashed violet arrow is a virtual image.

Images formed by a concave mirror

Position of the objectPosition of the imageSize of the imageNature of the image
At infinityAt the focus FHighly diminished, point-sizedReal and inverted
Beyond CBetween F and CDiminishedReal and inverted
At CAt CSame size as the objectReal and inverted
Between C and FBeyond CEnlargedReal and inverted
At FAt infinityHighly enlargedReal and inverted
Between P and FBehind the mirrorEnlargedVirtual and erect
ObjectImage
At infinityAt the focus FHighly diminished, point-sized, real and inverted
Beyond CBetween F and CDiminished, real and inverted
At CAt CSame size as the object, real and inverted
Between C and FBeyond CEnlarged, real and inverted
At FAt infinityHighly enlarged, real and inverted
Between P and FBehind the mirrorEnlarged, virtual and erect

Notice the pattern. As the object moves from far away towards F, the real image moves out from F towards infinity and grows larger. Once the object is between P and F, the reflected rays spread apart, so they never meet. The image is then virtual, erect and enlarged, behind the mirror.

Uses of concave mirrors

  • Torches, searchlights and vehicle headlights. The bulb is placed at the principal focus, so the light is reflected as a strong, parallel beam.
  • Shaving and make-up mirrors. With your face between P and F, you see a large, erect image of it.
  • Dentists’ mirrors. They give an enlarged image of the teeth.
  • Solar furnaces and solar cookers. Large concave mirrors concentrate sunlight at their focus to produce great heat.

Remember

  • A concave mirror forms a virtual image only when the object is between P and F. For every other position, the image is real and inverted.
  • A real image is always inverted, and a virtual image is always erect, for a single mirror.
  • Object at C gives an image at C, of the same size.
Quick checkA concave mirror forms a real image of the same size as the object. Where is the object, and where is the image?Show answer

The object is at the centre of curvature, C. The image is formed at C as well; it is real and inverted.

Try it yourselfMove an object in front of a mirror or a lens and watch the rays and the image change in the Mirror and lens lab.

4Images formed by a convex mirror

The rules for drawing rays are the same for a convex mirror, but F and C are behind the mirror. So rays are drawn heading towards F or C, and reflected rays that spread apart are traced back (dashed lines) to the points they seem to come from (Figure 8).

A ray parallel to the principal axis seems to come from F after reflection.PFC(i) Parallel ray
A ray heading towards F comes out parallel to the principal axis.PFC(ii) Ray towards F
A ray heading towards C is reflected back along the same path.PFC(iii) Ray towards C
A ray hitting the pole is reflected at an equal angle on the other side of the axis.PFC(iv) Ray to the pole
Figure 8. Rays for a convex mirror. The dashed lines show where the reflected rays seem to come from.

A convex mirror forms the same kind of image wherever the object is: virtual, erect and diminished, behind the mirror. Figure 9 shows the two cases, and the table sums them up.

Convex mirror, object at infinity: the image is at F behind the mirror, highly diminished, virtual and erect.PFC(a) At infinity
Convex mirror, object between infinity and P: the image is between P and F behind the mirror, diminished, virtual and erect.PFCAA′BB′(b) Between infinity and P
Figure 9. Images formed by a convex mirror. The image is always virtual, erect and smaller than the object.

Images formed by a convex mirror

Position of the objectPosition of the imageSize of the imageNature of the image
At infinityAt F, behind the mirrorHighly diminished, point-sizedVirtual and erect
Between infinity and the pole PBetween P and F, behind the mirrorDiminishedVirtual and erect
ObjectImage
At infinityAt F, behind the mirrorHighly diminished, point-sized, virtual and erect
Between infinity and the pole PBetween P and F, behind the mirrorDiminished, virtual and erect

Uses of convex mirrors

Vehicles use convex mirrors as rear-view (wing) mirrors, for two reasons:

  • the image is always the right way up, so the driver sees the traffic behind as it really is;
  • the mirror bulges outwards, so it shows a much wider area behind the vehicle than a plane mirror of the same size.

The image is smaller than the object, so vehicles behind look farther away than they really are. Convex mirrors are also put up at sharp bends on hill roads, so that drivers can see vehicles coming round the corner.

Remember

  • A convex mirror always forms a virtual, erect and diminished image behind the mirror: between P and F, or at F for a very distant object.
  • Convex mirrors give a wide field of view, which is why they are used as rear-view mirrors.
Quick checkYou look at your face in three mirrors, X, Y and Z. In X your face always looks smaller, however close you go. In Y it looks the same size at every distance. In Z it looks larger when you are close, and turns upside down when you move far away. Which type of mirror is each one?Show answer

X is a convex mirror, Y is a plane mirror and Z is a concave mirror.

5Sign convention, mirror formula and magnification

Ray diagrams show roughly where an image forms. To find its exact position and size, we use a formula. First, we need a rule for the signs of distances.

The New Cartesian sign convention

The pole of the mirror is taken as the origin, and the principal axis as the x-axis of a graph (Figure 10).

  1. The object is always placed to the left of the mirror, so light falls on the mirror from the left.
  2. All distances along the principal axis are measured from the pole.
  3. Distances measured to the right of the pole are positive. Distances measured to the left are negative.
  4. Heights measured upwards from the principal axis are positive. Heights measured downwards are negative.
The New Cartesian sign convention for a mirror. The pole p is the origin. The object is on the left, and light falls from the left. Distances to the right and heights above the principal axis are positive; distances to the left and heights below the axis are negative, so the object distance u is negative.Right: +Left: –Up: +Down: –Pole PObjectu is negativeIncident light
Figure 10. The New Cartesian sign convention for a mirror.

So, for any mirror:

  • the object distance u is always negative, because the object is on the left;
  • the focal length f of a concave mirror is negative (F is in front), and that of a convex mirror is positive (F is behind);
  • a real image forms in front of the mirror, so its image distance v is negative; a virtual image forms behind it, so v is positive.

Mirror formula

The object distance u, the image distance v and the focal length f are linked by the mirror formula:

Formula

1v + 1u = 1f

where

  • uobject distance, from the polemetre (m) or cm
  • vimage distance, from the polemetre (m) or cm
  • ffocal lengthmetre (m) or cm

The formula works for concave and convex mirrors and for every position of the object. Put each value in with its sign, and keep all the distances in the same unit. To find the image distance, rearrange it as 1v = 1f − 1u.

Magnification

Magnification tells us how many times larger (or smaller) the image is than the object:

Formula

m = h′h = −vu

where

  • mmagnificationno unit
  • h′height of the imagecm or m
  • hheight of the objectcm or m
  • If m is negative, the image is real and inverted. If m is positive, it is virtual and erect.
  • If m, ignoring its sign, is more than 1, the image is enlarged. If it is less than 1, the image is diminished.

Worked example 2

An object is placed 25 cm in front of a concave mirror of focal length 15 cm. Find the position of the image and the magnification. Describe the image.

Given
f = −15 cm (concave mirror)u = −25 cm
Find
Image distance v, and magnification m

Solution

1v=1f − 1u=1−15 − 1−25=−115 + 125=−5 + 375=−275v=75−2 cm=−37.5 cmm=−vu=−−37.5 cm−25 cm=−1.5

The image is 37.5 cm in front of the mirror. It is real, inverted and 1.5 times the size of the object. (The object is between C and F, so this matches the table in topic 3.)

Worked example 3

An object 4 cm tall is placed 20 cm in front of a convex mirror of focal length 20 cm. Find the position and the height of the image.

Given
f = +20 cm (convex mirror)u = −20 cmh = +4 cm
Find
Image distance v, and image height h′

Solution

1v=1f − 1u=120 − 1−20=120 + 120=220=110v=+10 cmm=−vu=−10 cm−20 cm=+0.5h′=m × h=0.5 × 4 cm=+2 cm

The image is 10 cm behind the mirror and 2 cm tall. It is virtual and erect (positive height), and half the size of the object.

Worked example 4

A concave mirror of focal length 12 cm forms an erect image three times the size of the object. Find where the object is placed, and where the image is formed.

Given
f = −12 cm (concave mirror)m = +3 (an erect image has a positive magnification)
Find
Object distance u, and image distance v

Solution

−vu=3v=−3u1−3u + 1u=1−12−1 + 33u=−11223u=−1123u=−24u=−8 cmv=−3 × (−8 cm)=+24 cm

The object must be 8 cm in front of the mirror, between P and F. The image is formed 24 cm behind the mirror.

Remember

  • Always put values into the formula with their signs: u is always negative; f is negative for a concave mirror and positive for a convex mirror.
  • Mirror formula: 1v + 1u = 1f. Magnification: m = h′h = −vu.
  • A negative v means a real image in front of the mirror. A positive v means a virtual image behind it.
Quick checkAn object is placed 30 cm in front of a concave mirror of focal length 15 cm. Find the position of the image.Show answer
1v=1f − 1u=1−15 − 1−30=−2 + 130=−130v=−30 cm

The image is 30 cm in front of the mirror, at the centre of curvature. It is real, inverted and the same size as the object.

6Refraction of light

A pencil dipped at an angle into a glass of water looks bent at the surface. The bottom of a pool looks closer than it really is, and letters seen through a thick glass block look raised. All of these happen because light changes direction as it passes from one transparent medium into another.

Refraction

Refraction is the change in direction of light when it passes at an angle from one transparent medium into another. It happens because light travels at different speeds in different media.

Bending towards or away from the normal

Light slows down when it passes from air into glass or water, and it bends towards the normal. When it passes from glass or water back into air, it speeds up and bends away from the normal (Figure 11). The angle between the refracted ray and the normal is the angle of refraction, r.

Light going from air into glass bends towards the normal: the angle of refraction r is smaller than the angle of incidence i.irAirGlassAir into glass: towards the normal
Light going from glass into air bends away from the normal: the angle of refraction r is larger than the angle of incidence i.irGlassAirGlass into air: away from the normal
Figure 11. Light bends towards the normal when it slows down, and away from the normal when it speeds up.

A ray that falls along the normal (an angle of incidence of 0°) goes straight through without bending, even though its speed changes.

Refraction through a glass slab

Place a rectangular glass slab on a sheet of paper and trace the path of a ray of light through it, using pins or a narrow beam of light (Figure 12). You will find that:

  • the ray bends towards the normal as it enters the glass, and away from the normal as it leaves;
  • the emergent ray (the ray that comes out of the slab) is parallel to the incident ray, because the bending at the two parallel faces is equal and opposite. The angle of emergence e, between the emergent ray and the normal, is equal to the angle of incidence i;
  • the emergent ray is shifted sideways a little. This shift is called the lateral displacement. It is larger for a thicker slab.
Refraction through a rectangular glass slab. The ray bends towards the normal as it enters the glass and away from the normal as it leaves. The emergent ray is parallel to the incident ray but shifted sideways; this shift is the lateral displacement.LateraldisplacementireGlass slabAirAirIncident rayEmergent ray
Figure 12. Refraction through a rectangular glass slab. The emergent ray is parallel to the incident ray, but shifted sideways.

Laws of refraction

Laws of refraction

  1. The incident ray, the refracted ray and the normal to the surface at the point of incidence all lie in the same plane.
  2. For light of a given colour and a given pair of media, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant. This is called Snell’s law.

Formula

sin isin r = constant = n21

where

  • iangle of incidence, in medium 1degree (°)
  • rangle of refraction, in medium 2degree (°)
  • n21refractive index of medium 2 with respect to medium 1no unit

The constant is the refractive index of the second medium with respect to the first. The next topic explains what it tells us.

Worked example 5

A ray of light travelling in air falls on the surface of a glass block. The angle of incidence is 45° and the angle of refraction is 30°. Find the refractive index of the glass.

Given
i = 45°, so sin i = 1√2 = 0.707r = 30°, so sin r = 12 = 0.5
Find
Refractive index of glass with respect to air, n

Solution

n=sin isin r=sin 45°sin 30°=0.7070.5≈1.41

The refractive index of the glass is about 1.41.

Remember

  • Light bends towards the normal when it slows down (for example, from air into glass) and away from the normal when it speeds up.
  • A ray along the normal passes straight through without bending.
  • In a glass slab, the emergent ray is parallel to the incident ray: e = i. The sideways shift is the lateral displacement.
  • Snell’s law: sin isin r = constant, for light of one colour and one pair of media.
Quick checkA ray of light falls along the normal on one face of a glass slab. What is its angle of refraction, and does it bend?Show answer

The angle of refraction is 0°. The ray passes straight into the glass without bending, although it slows down.

7Refractive index

Light travels fastest in a vacuum, at 3 × 108 m s−1. Its speed in air is only a tiny bit less, so we use the same value for air. In glass, water and other transparent media, light travels more slowly. The refractive index of a medium compares these speeds.

Relative refractive index

When light passes from medium 1 into medium 2, the refractive index of medium 2 with respect to medium 1 is

Formula

n21 = v1v2

where

  • n21refractive index of medium 2 with respect to medium 1no unit
  • v1speed of light in medium 1m s⁻¹
  • v2speed of light in medium 2m s⁻¹

Turning it the other way round, the refractive index of medium 1 with respect to medium 2 is n12 = v2v1, so n12 = 1n21.

Absolute refractive index

When the first medium is a vacuum (or air), we get the absolute refractive index of the medium, usually just called its refractive index:

Formula

nm = cvm

where

  • nmabsolute refractive index of the mediumno unit
  • cspeed of light in vacuum or air, 3 × 10⁸ m s⁻¹m s⁻¹
  • vmspeed of light in the mediumm s⁻¹

Refractive index is a ratio of two speeds, so it has no unit. The absolute refractive index is never less than 1, because nothing travels faster than light in a vacuum. The table gives values for some common media, with the speed of light in each worked out from vm = cnm.

MediumRefractive index, nSpeed of light in it (in m s−1)
Air1.00033.00 × 108
Ice1.312.29 × 108
Water1.332.26 × 108
Alcohol1.362.21 × 108
Kerosene1.442.08 × 108
Turpentine oil1.472.04 × 108
Benzene1.502.00 × 108
Crown glass1.521.97 × 108
Rock salt1.541.95 × 108
Dense flint glass1.651.82 × 108
Ruby1.711.75 × 108
Diamond2.421.24 × 108

Refractive index changes slightly with the colour of the light. These are standard values for yellow light.

Worked example 6

The refractive index of water is 1.33. Find the speed of light in water.

Given
n = 1.33c = 3 × 108 m s−1
Find
Speed of light in water, v

Solution

n=cvv=cn=3 × 108 m s−11.33≈2.26 × 108 m s−1

Light travels at about 2.26 × 108 m s−1 in water.

Optical density

Compare two media and the one with the larger refractive index, in which light is slower, is called optically denser; the other is optically rarer. In the table, diamond is the optically densest medium and air the rarest. This tells us which way light bends:

  • going into an optically denser medium, light slows down and bends towards the normal;
  • going into an optically rarer medium, light speeds up and bends away from the normal.

Do not confuse optical density with mass density. Kerosene floats on water, so its mass density is lower. Yet its refractive index, 1.44, is higher than that of water, 1.33, so kerosene is the optically denser of the two.

If n1 and n2 are the absolute refractive indices of medium 1 and medium 2, the speed of light in each medium is c divided by its refractive index. So the refractive index of medium 2 with respect to medium 1 is n21 = v1v2 = n2n1.

Worked example 7

The refractive index of glass is 1.50 and that of water is 1.33. Find the refractive index of glass with respect to water. Does light going from water into glass bend towards the normal or away from it?

Given
ng = 1.50nw = 1.33
Find
Refractive index of glass with respect to water, ngw

Solution

ngw=vwvg=ngnw=1.501.33≈1.13

The refractive index of glass with respect to water is about 1.13. It is more than 1, so glass is optically denser than water, and light going from water into glass bends towards the normal.

Remember

  • Absolute refractive index: nm = cvm. It has no unit.
  • The larger the refractive index, the slower light travels and the optically denser the medium.
  • Optical density is different from mass density.
Quick checkLight travels at 2 × 108 m s−1 in a certain kind of glass. Find the refractive index of this glass.Show answer
n=cv=3 × 108 m s−12 × 108 m s−1=1.5

The refractive index of the glass is 1.5.

8Spherical lenses

A lens is a piece of transparent material, such as glass, with two surfaces, at least one of which is curved. Lenses are used in spectacles, cameras, microscopes and telescopes. Lenses whose curved surfaces are parts of spheres are called spherical lenses.

  • A convex lens is thicker in the middle than at the edges. It brings parallel rays of light together, so it is also called a converging lens.
  • A concave lens is thinner in the middle than at the edges. It spreads parallel rays of light apart, so it is also called a diverging lens.
A convex lens: thicker in the middle than at the edges.Thicker in the middleConvex (converging) lens
A concave lens: thinner in the middle than at the edges.Thinner in the middleConcave (diverging) lens
Figure 13. A convex lens and a concave lens. Both of these lenses curve on both sides.

Words used for lenses

  • Centres of curvature: each surface of a lens is part of a sphere. The centres of these two spheres are the centres of curvature of the lens, C1 and C2.
  • Principal axis: the straight line through the two centres of curvature.
  • Optical centre (O): the central point of the lens, on the principal axis. A ray of light through the optical centre goes straight on without bending.
  • Aperture: the width of the round outline of the lens. We study thin lenses with small apertures.
  • 2F1 and 2F2: the points on the principal axis at twice the focal length from O, one on each side of the lens. They are used to describe where objects and images are.
A convex lens with its optical centre O on the principal axis, a principal focus on each side, F1 and F2, and the points 2F1 and 2F2. Each focus is at the focal length f from O.2F1F1F22F2OffPrincipal axis
Figure 14. A convex lens, with its optical centre O and a principal focus on each side, at the focal length f from O.

Principal focus and focal length

Let rays parallel to the principal axis fall on a lens. A convex lens brings them together at a point on the principal axis on the other side. A concave lens spreads them apart, so that they seem to come from a point on the principal axis on the same side as the light (Figure 15).

Rays parallel to the principal axis pass through a convex lens and meet at the principal focus F2.OF1F22F12F2Convex lens: the rays meet at F2
Rays parallel to the principal axis pass through a concave lens and spread out as if they came from the principal focus F1.OF1F22F12F2Concave lens: the rays seem to come from F1
Figure 15. A convex lens brings parallel rays to a focus. A concave lens spreads them out.

Principal focus

The principal focus of a convex lens is the point on the principal axis where rays parallel to the axis meet after passing through the lens. For a concave lens, it is the point on the principal axis from which such rays seem to come. Light can pass through a lens from either side, so every lens has two principal foci, F1 and F2, one on each side. The distance from the optical centre to a principal focus is the focal length, f.

A convex lens can focus sunlight. Hold it facing the Sun and move a sheet of paper behind it until you get a small, sharp, bright spot. This is an image of the Sun at the principal focus, and the paper may start to burn. The distance from the lens to the paper gives a rough value of the focal length. Never look at the Sun through a lens.

Remember

  • A convex lens is thicker in the middle and converges light. A concave lens is thinner in the middle and diverges light.
  • A ray through the optical centre O goes straight on without bending.
  • Every lens has two principal foci, F1 and F2, at the same distance f from O on either side.
Quick checkYou have two lenses that look alike. Just by looking through them, how can you tell which one is convex?Show answer

Hold each lens a little above this page and look at the letters through it. A convex lens makes nearby letters look larger. A concave lens always makes them look smaller.

9Images formed by lenses

As with mirrors, the image formed by a lens can be found by drawing two rays from the top of the object. We place the object on the left, so F1 and 2F1 are on the same side as the object and F2 and 2F2 are on the other side.

Rays for drawing lens diagrams

  1. A ray parallel to the principal axis passes through F2 after a convex lens. After a concave lens, it spreads out as if it came from F1.
  2. A ray through F1 comes out of a convex lens parallel to the principal axis. A ray heading towards F2 comes out of a concave lens parallel to the principal axis.
  3. A ray through the optical centre O goes straight on without bending.
After refraction, a ray parallel to the principal axis passes through F2.OF1F2Convex lens: parallel ray
A ray through F1 comes out parallel to the principal axis.OF1F2Convex lens: ray through F1
A ray through the optical centre O goes straight on without bending.OF1F2Convex lens: ray through O
After refraction, a ray parallel to the principal axis seems to come from F1.OF1F2Concave lens: parallel ray
A ray heading towards F2 comes out parallel to the principal axis.OF1F2Concave lens: ray towards F2
A ray through the optical centre O goes straight on without bending.OF1F2Concave lens: ray through O
Figure 16. Rays whose paths through a convex lens and a concave lens are easy to draw.

Images formed by a convex lens

Like a concave mirror, a convex lens can form many kinds of image, depending on where the object is (Figure 17).

Convex lens, object at infinity: the image is at F2, highly diminished, real and inverted.OF1F22F12F2(a) At infinity
Convex lens, object beyond 2F1: the image is between F2 and 2F2, diminished, real and inverted.OF1F22F12F2AA′BB′(b) Beyond 2F1
Convex lens, object at 2F1: the image is at 2F2, the same size, real and inverted.OF1F22F12F2AA′(c) At 2F1
Convex lens, object between F1 and 2F1: the image is beyond 2F2, enlarged, real and inverted.OF1F22F12F2AA′BB′(d) Between F1 and 2F1
Convex lens, object at F1: the image is at infinity, highly enlarged, real and inverted.OF1F22F12F2A(e) At F1
Convex lens, object between F1 and O: the image is on the same side as the object, enlarged, virtual and erect.OF1F22F12F2AA′B(f) Between F1 and O
Figure 17. Images formed by a convex lens. Solid violet arrows are real images; the dashed violet arrow is a virtual image.

Images formed by a convex lens

Position of the objectPosition of the imageSize of the imageNature of the image
At infinityAt the focus F2Highly diminished, point-sizedReal and inverted
Beyond 2F1Between F2 and 2F2DiminishedReal and inverted
At 2F1At 2F2Same size as the objectReal and inverted
Between F1 and 2F1Beyond 2F2EnlargedReal and inverted
At the focus F1At infinityHighly enlargedReal and inverted
Between F1 and the optical centre OOn the same side of the lens as the objectEnlargedVirtual and erect
ObjectImage
At infinityAt the focus F2Highly diminished, point-sized, real and inverted
Beyond 2F1Between F2 and 2F2Diminished, real and inverted
At 2F1At 2F2Same size as the object, real and inverted
Between F1 and 2F1Beyond 2F2Enlarged, real and inverted
At the focus F1At infinityHighly enlarged, real and inverted
Between F1 and the optical centre OOn the same side of the lens as the objectEnlarged, virtual and erect

When the object is between F1 and O, the rays spread apart after passing through the lens. Looking back through the lens, you see an enlarged, erect, virtual image. This is how a magnifying glass works.

Images formed by a concave lens

A concave lens always forms a virtual, erect and diminished image, on the same side as the object, wherever the object is (Figure 18).

Concave lens, object at infinity: the image is at F1, highly diminished, virtual and erect.OF1F22F12F2(a) At infinity
Concave lens, object between infinity and O: the image is between F1 and O, diminished, virtual and erect.OF1F22F12F2AA′B′(b) Between infinity and O
Figure 18. Images formed by a concave lens. The image is always virtual, erect and smaller than the object.

Images formed by a concave lens

Position of the objectPosition of the imageSize of the imageNature of the image
At infinityAt the focus F1Highly diminished, point-sizedVirtual and erect
Between infinity and the optical centre OBetween F1 and ODiminishedVirtual and erect
ObjectImage
At infinityAt the focus F1Highly diminished, point-sized, virtual and erect
Between infinity and the optical centre OBetween F1 and ODiminished, virtual and erect

Uses of lenses

  • Convex lenses are used as magnifying glasses, in cameras, projectors, microscopes and telescopes, and in spectacles for people who cannot see nearby things clearly.
  • Concave lenses are used in spectacles for people who cannot see distant things clearly, and together with convex lenses in many optical instruments.

Remember

  • A convex lens forms a virtual image only when the object is between F1 and O. For every other position, the image is real and inverted.
  • A concave lens always forms a virtual, erect and diminished image.
  • Object at 2F1 gives a real, inverted image of the same size at 2F2.
Quick checkA convex lens forms a virtual image of an object. Where must the object be placed?Show answer

Between the principal focus F1 and the optical centre O. For every other position, a convex lens forms a real, inverted image.

10Lens formula, magnification and power

For lenses, we use the same New Cartesian sign convention as for mirrors, but all distances are measured from the optical centre O (Figure 19). The object is on the left, so u is negative. The focal length of a convex lens is positive, because the point F2 where it brings parallel rays together is on the right. The focal length of a concave lens is negative, because the point F1 from which the rays seem to come is on the left.

The New Cartesian sign convention for a lens. The optical centre o is the origin. The object is on the left, and light falls from the left. Distances to the right and heights above the principal axis are positive; distances to the left and heights below the axis are negative, so the object distance u is negative.Right: +Left: –Up: +Down: –Optical centre OObjectu is negativeIncident light
Figure 19. The sign convention for a lens. Distances are measured from the optical centre O.

Lens formula

Formula

1v − 1u = 1f

where

  • uobject distance, from the optical centremetre (m) or cm
  • vimage distance, from the optical centremetre (m) or cm
  • ffocal lengthmetre (m) or cm

Note the minus sign: the lens formula is not the same as the mirror formula. To find the image distance, rearrange it as 1v = 1f + 1u. A positive v means a real image on the other side of the lens. A negative v means a virtual image on the same side as the object.

Magnification

Formula

m = h′h = vu

where

  • mmagnificationno unit
  • h′height of the imagecm or m
  • hheight of the objectcm or m

As for mirrors, a negative m means a real, inverted image, and a positive m means a virtual, erect image. For a lens, there is no minus sign in front of vu.

Worked example 8

An object 2 cm tall is placed 15 cm in front of a convex lens of focal length 10 cm. Find the position, nature and size of the image.

Given
f = +10 cm (convex lens)u = −15 cmh = +2 cm
Find
Image distance v, magnification m and image height h′

Solution

1v=1f + 1u=110 + 1−15=110 − 115=3 − 230=130v=+30 cmm=vu=30 cm−15 cm=−2h′=m × h=−2 × 2 cm=−4 cm

The image is 30 cm from the lens, on the other side. It is real and inverted, and 4 cm tall: twice the size of the object.

Worked example 9

An object is placed 30 cm in front of a concave lens of focal length 20 cm. Find the position of the image and the magnification.

Given
f = −20 cm (concave lens)u = −30 cm
Find
Image distance v, and magnification m

Solution

1v=1f + 1u=1−20 + 1−30=−3 − 260=−560=−112v=−12 cmm=vu=−12 cm−30 cm=+0.4

The image is 12 cm from the lens, on the same side as the object. It is virtual, erect and 0.4 times the size of the object.

Power of a lens

A lens with a short focal length bends light strongly; one with a long focal length bends it only a little. The power of a lens measures how strongly it converges or diverges light.

Power of a lens

The power of a lens is the reciprocal of its focal length, with the focal length in metres.

Formula

P = 1f

where

  • Ppower of the lensdioptre (D)
  • ffocal length, in metresmetre (m)

The SI unit of power is the dioptre (D). 1 dioptre is the power of a lens whose focal length is 1 metre, so 1 D = 1 m−1.

  • A convex lens has a positive focal length, so its power is positive.
  • A concave lens has a negative focal length, so its power is negative.

Worked example 10

Find the power of a concave lens of focal length 25 cm.

Given
f = −25 cm = −0.25 m (concave lens)
Find
Power, P

Solution

P=1f=1−0.25 m=−4 D

The power of the lens is −4 D. The minus sign shows that it is a diverging (concave) lens.

Lenses in contact

When thin lenses are placed in contact, the power of the combination is the sum of their separate powers:

Formula

P = P1 + P2 + P3 + …

where

  • Ppower of the combinationdioptre (D)
  • P1, P2, …powers of the separate lenses, with their signsdioptre (D)

Eye specialists use this when testing eyes. They put lenses of known power together in a trial frame to find the power a person needs.

Worked example 11

A convex lens of power +2.5 D is placed in contact with a concave lens of power −1.0 D. Find the power and the focal length of the combination. Does it act as a converging or a diverging lens?

Given
P1 = +2.5 DP2 = −1.0 D
Find
Power P and focal length f of the combination

Solution

P=P1 + P2=+2.5 D + (−1.0 D)=+1.5 Df=1P=11.5 D≈0.667 m≈66.7 cm

The combination has a power of +1.5 D and a focal length of about 66.7 cm. Its power is positive, so it acts as a converging lens.

Remember

  • Lens formula: 1v − 1u = 1f. Magnification: m = h′h = vu.
  • Power: P = 1f, with f in metres. Convex lenses have positive power; concave lenses have negative power.
  • For lenses in contact, the powers add: P = P1 + P2 + …
Quick checkFind the power of a convex lens of focal length 50 cm.Show answer
f=+50 cm=+0.5 mP=1f=10.5 m=+2 D

The power of the lens is +2 D.

Test yourselfTake the 24-question practice quiz on this chapter. Revising for the board exam?Get the Chapter 9 revision PDF: quick notes, 20 new board-pattern questions and full answers, for ₹49.