Chapter 7 · Science

Particulate Nature of Matter

Matter is made of tiny particles: how strongly they attract, how far apart they are and how they move decide whether a substance is a solid, a liquid or a gas, and explain melting, boiling, dissolving and diffusion.

Done reading? Try the Particle lab activity on this chapter.
In this chapter 11 topics
  1. 1What matter is made of
  2. 2Dissolving: particles too small to see
  3. 3Interparticle attraction and the states of matter
  4. 4The solid state
  5. 5Melting and melting point
  6. 6The liquid state
  7. 7Boiling, evaporation and changes of state
  8. 8The gaseous state
  9. 9Spaces between particles
  10. 10Particles are always moving: diffusion
  11. 11Solids, liquids and gases compared

1What matter is made of

Matter

Anything that has mass and takes up space. Chalk, sugar, water, air and your own body are all matter.

Breaking chalk (Activity)

  1. Break a stick of chalk into two pieces.
  2. Keep breaking it until the pieces are too small to break by hand.
  3. Grind the small pieces into a fine powder with a mortar and pestle.
  4. Look at the powder through a magnifying glass.
Breaking chalk. (a) A whole stick of chalk. (b) The stick broken into two pieces. (c) Small pieces ground to a fine powder in a stone mortar with a pestle. (d) The powder seen through a magnifying glass: every tiny grain is still chalk.(a) a stick of chalk(b) broken into two(c) ground to powder(d) powder, magnified
Figure 1. Chalk broken down to a fine powder.
  • Every tiny grain of the powder is still chalk. No new substance forms.
  • Only the size of the pieces changes, so grinding is a physical change.
  • If we could keep grinding, we would reach units that cannot be broken any further.

Constituent particle

The basic unit that makes up a larger piece of a substance. A piece of chalk is made of a huge number of chalk particles.

Key facts

  • All matter is made of extremely small particles.
  • These particles are far too small to see, even with an ordinary microscope.
  • Sand and clay grains are not the smallest units of rock. Each grain is made of countless particles.
  • Rocks break into pebbles, sand and clay by erosion. The pieces get smaller, but they are still rock.

Our scientific heritage

Thinkers have long asked how far matter can be broken down. Acharya Kanad, an ancient Indian philosopher, said all matter is made of tiny particles called Parmanu (atom). He believed they could not be divided and lasted for ever. He wrote this idea in the Vaisheshika Sutras.

A step further: atoms and molecules

  • The tiny particles that make up matter are atoms and molecules.
  • Iron is made of iron atoms. Gold is made of gold atoms.
  • Atoms of some elements, such as hydrogen, oxygen and sulphur, do not exist on their own. They join in small groups called molecules.
  • Two hydrogen atoms join to make one hydrogen molecule.
  • A water molecule has two hydrogen atoms and one oxygen atom.

Watch the word “particle”. Suspended particulate matter (SPM) in polluted air means tiny dust specks. These specks are huge compared with constituent particles. Each speck is itself made of countless atoms and molecules.

Remember

  • All matter is made of extremely small particles.
  • A constituent particle is the basic unit of a substance.
  • Breaking or grinding only makes pieces smaller: a physical change.
  • Kanad called the smallest particle Parmanu.
Quick checkA grain of chalk powder is crushed further. Is the dust still chalk? Why?Show answer

Yes. Crushing is a physical change. It only makes the pieces smaller. Every piece is still made of chalk particles.

2Dissolving: particles too small to see

Sugar in water (Activity)

  1. Put two teaspoons of sugar into a glass of drinking water. Do not stir.
  2. Taste a spoonful from the top layer. It is hardly sweet, because the sugar is still at the bottom.
  3. Stir until all the sugar disappears.
  4. Taste the top layer again. Now it is sweet.

Safety: do this with an adult. Never taste anything in a laboratory unless a teacher asks you to.

A spoon stirs sugar into a glass of water until no sugar can be seen. A magnified view shows the idea: tiny sugar particles now sit in the spaces between the water particles, spread all through the water.sugar particlewater particlestir until it dissolvesmagnified idea
Figure 2. Dissolving sugar: the particles spread through the water.

What this shows

  • The sugar is still there, because the water tastes sweet.
  • We cannot see it because it has broken up into its constituent particles.
  • These particles are too small to see. One grain of sugar holds millions and millions of them.
  • The sugar particles spread out and fit into the gaps between water particles.

Interparticle spaces

The empty spaces between the particles of a substance. When sugar dissolves, its particles move into the spaces between water particles.

Dissolving

When a solid breaks up into its particles, which spread evenly through a liquid. The mixture formed is a solution.

Common mistake. Dissolved sugar has not vanished or turned into water. Its particles are just too small to see. Taste proves it is there.

Remember

  • Dissolved sugar breaks into particles too small to see.
  • Its particles fill the spaces between water particles.
  • Taste shows the sugar is still present.
  • Spaces between particles are called interparticle spaces.
Quick checkSalt is stirred into water until it cannot be seen. How can you tell it is still there?Show answer

Taste a drop: it is salty. The salt has broken into tiny particles that are spread through the water.

3Interparticle attraction and the states of matter

Interparticle attraction

The force of attraction that holds the particles of a substance together.

Key facts

  • The strength of the attraction depends on two things:
    • the kind of substance;
    • the distance between the particles.
  • Even a small increase in distance makes the attraction much weaker.
  • The strength of the attraction decides the state of a substance: solid, liquid or gas.
Three magnified views. An ice cube (solid): particles packed close in fixed places. Water in a beaker (liquid): particles close together but untidy, able to slide. Air in a balloon (gas): a few particles far apart, moving freely.Solidfixed placesLiquidcan slideGasfar apart
Figure 3. Particles in a solid, a liquid and a gas.
FeatureSolidLiquidGas
AttractionStrongestA bit weakerNegligible
SpacingLeastA bit moreMost
MovementVibrate in placeSlide aboutMove freely
FeatureSolid, liquid, gas
AttractionSolid: Strongest
Liquid: A bit weaker
Gas: Negligible
SpacingSolid: Least
Liquid: A bit more
Gas: Most
MovementSolid: Vibrate in place
Liquid: Slide about
Gas: Move freely

What decides the state?

  • Particles have thermal (heat) energy, which makes them move.
  • Low energy: particles stay close and pull strongly on each other. The substance is a solid.
  • More energy: particles move a little apart and can move around. The substance is a liquid.
  • A lot of energy: particles break free of each other. The substance is a gas.

Remember

  • Particles attract each other: interparticle attraction.
  • Closer particles attract more strongly.
  • The strength of attraction decides solid, liquid or gas.
  • Heat energy lets particles move further apart.
Quick checkIn which state is the interparticle attraction the weakest?Show answer

In a gas. Its particles are far apart, so the attraction between them is negligible.

Try it yourselfHeat ice into water and steam, race colour through hot and cold water, and hide sugar in the spaces between water particles in the Particle lab.

4The solid state

Some solids (Activity)

Collect an iron nail, rock salt, a stone, a wooden block, a key and a piece of aluminium. Look at their shapes and sizes. Try hammering them.

Six solid objects on a wooden table: an iron nail, a lump of rock salt, a stone, a wooden block, a key and a crumpled piece of aluminium. Each keeps its own shape and size.iron nailrock saltstonewooden blockkeyaluminium piece
Figure 4. Every solid keeps its own shape and size.
  • Each object keeps its shape and size unless a big force acts on it.
  • Particles are held very strongly in the iron nail, the key and the aluminium. Hammering hardly changes them.
  • Rock salt and stone break into smaller pieces under the hammer. Each piece is still solid.

Solid

A state of matter with a definite (fixed) shape and a definite volume.

Particles in a solid

  • Packed very close together, usually in a regular pattern.
  • Very strong attraction holds each particle in a fixed place.
  • Particles only vibrate (move to and fro) about their fixed places. They cannot move past each other.

Properties of solids

PropertySolidsReason
ShapeFixedParticles stay in fixed places
VolumeFixedParticles are packed close
RigidityRigid: keep their shape when pushedStrong attraction
CompressibilityAlmost noneHardly any space between particles
FlowDo not flowParticles cannot move past each other

Rigid

Keeps its shape when a force acts on it. Solids are rigid; liquids and gases are not.

Compressible

Can be squashed into a smaller volume. Gases are very compressible; solids and liquids are not.

Note. A rubber band or a sponge changes shape when pulled or squeezed. It is still a solid. It goes back to its own shape when you let go.

Remember

  • Solids have a fixed shape and a fixed volume.
  • Their particles are closely packed in fixed places.
  • The particles only vibrate.
  • Solids are rigid and almost impossible to compress.
Quick checkWhy does an iron key keep its shape when you press it?Show answer

Its particles are held in fixed places by very strong attraction. They cannot move past each other, so the shape stays the same.

5Melting and melting point

How a solid melts

  1. Heat gives the particles more energy, so they vibrate harder.
  2. The vibrations push them slightly apart. The attraction becomes weaker.
  3. At a certain temperature, the particles leave their fixed places.
  4. They can now slide past each other. The solid has become a liquid.
Melting, shown with particles. (a) In a solid, particles sit in fixed places and only vibrate. (b) When heated, they vibrate harder. (c) At the melting point they leave their fixed places and slide past each other: the solid has become a liquid.heatheat(a) solid(b) heated(c) liquidfixed places,vibrate a littlevibrate harder,move apartfree to slidepast each other
Figure 5. Melting, shown with particles.

Melting

The change of a solid into a liquid on heating.

Melting point

The lowest temperature at which a solid melts into a liquid at normal air (atmospheric) pressure.

Melting points

SolidMelting pointAttraction between particles
Ice0 °CWeak
Urea133 °CMedium
Iron1538 °CVery strong
Melting points of three solids: ice melts at 0 °C, urea at 133 °C and iron at 1538 °C.ice0 °Curea133 °Ciron1538 °C
Figure 6. Melting points of three solids.
  • Weak attraction: little heat is needed to free the particles, so the melting point is low.
  • Strong attraction: much more heat is needed, so the melting point is high.
  • In most substances, particles in the liquid are a little further apart than in the solid.
  • Ice is an exception. Its particles are further apart than in liquid water. This is why ice floats on water.

Melting is a physical change. Ice and water are both water. Cooling the liquid turns it back into a solid. This change is called freezing.

Remember

  • Heating makes particles in a solid vibrate harder.
  • At the melting point they leave their fixed places.
  • Ice 0 °C, urea 133 °C, iron 1538 °C.
  • Stronger attraction means a higher melting point.
Quick checkIron melts at 1538 °C but ice melts at 0 °C. What does this tell you about their particles?Show answer

The particles of iron attract each other much more strongly. Far more heat is needed to free them from their fixed places.

6The liquid state

Same water, different containers (Activity)

  1. Take three clean, dry containers of different shapes. Label them A, B and C.
  2. Mark the 200 mL level on each.
  3. Fill A with water up to the mark.
  4. Pour all of it into B, then from B into C. Check the shape and the level each time.
The same 200 mL of water poured from a bottle (A) into a wide jug (B) and then into a tall glass (C). The water takes a new shape each time, but the level stays at the 200 mL mark: its volume does not change.200 mL200 mL200 mLpourpourABC
Figure 7. The shape changes; the volume does not.
  • The water takes the shape of each container. A liquid has no fixed shape.
  • The level stays at 200 mL. A liquid has a fixed volume.
  • A dirty container may hold back a few drops on its walls. Then the level can be slightly below 200 mL.

Liquid

A state of matter with a fixed volume but no fixed shape. It flows and takes the shape of its container.

A finger through water

A finger is drawn through water in a shallow dish. It moves easily, pushing the water aside, and the water flows straight back behind it.finger moves through easilywater flows back
Figure 8. A finger moves easily through water.
  • A finger moves easily through water. The water moves aside and then flows back.
  • You cannot do this with a solid without breaking it.
  • So the attraction in a liquid is a little weaker than in a solid.
  • It is still strong enough to keep the particles close together.

Particles in a liquid

  • Close together, but a little further apart than in a solid.
  • Not in fixed places. They move around and slide past each other.
  • They can move only within a limited space, inside the liquid.
PropertyLiquidsReason
ShapeNot fixedParticles slide past each other
VolumeFixedAttraction keeps particles close
CompressibilityVery lowLittle space between particles
FlowFlow easilyParticles are free to move

Remember

  • Liquids have a fixed volume but no fixed shape.
  • Their particles are close but can slide past each other.
  • Attraction is a little weaker than in solids.
  • Liquids flow and take the shape of the container.
Quick checkJuice is poured from a tall bottle into a wide bowl. What changes and what stays the same?Show answer

The shape changes to the shape of the bowl. The volume of juice stays the same.

7Boiling, evaporation and changes of state

Boiling

  1. Heating a liquid makes its particles move faster and faster.
  2. They move apart, so the attraction between them becomes weaker.
  3. At last particles escape from the liquid. The liquid turns into vapour, a gas.

Boiling point

The temperature at which a liquid boils and turns into vapour at normal air (atmospheric) pressure. Water boils at 100 °C.

  • At the boiling point, vapour forms very fast.
  • It forms all through the liquid, not only at the top. This is why bubbles appear.

Evaporation

Evaporation

The slow change of a liquid into vapour at any temperature below its boiling point. It happens only at the surface.

Spilled water dries up on a cool day. Wet clothes dry on a line. The fastest particles at the surface escape into the air, even without boiling.

Left: water boiling in a beaker over a flame. At 100 °C bubbles of vapour form all through the water and steam rises. Right: a puddle drying in the sun. Particles escape slowly, only from its surface, at any temperature.100 °CBoilingEvaporationparticles escapefrom the surface
Figure 9. Boiling and evaporation.
BoilingEvaporation
Happens at one temperature: the boiling pointHappens at any temperature
All through the liquid (bubbles form)Only at the surface
FastSlow

All the changes of state

ChangeFrom → toHeat
MeltingSolid → liquidTaken in
Boiling or evaporationLiquid → gasTaken in
CondensationGas → liquidGiven out
FreezingLiquid → solidGiven out
Changes of state. Heating turns a solid into a liquid (melting) and a liquid into a gas (boiling or evaporation): the particles move faster and further apart. Cooling reverses this: a gas turns into a liquid (condensation) and a liquid into a solid (freezing).SolidiceLiquidwaterGassteammeltingboiling,evaporationcondensationfreezing
Figure 10. Heating and cooling change the state.
  • Heating: particles gain energy, move faster and get further apart.
  • Cooling: particles lose energy, slow down and come closer together.
  • Water droplets on a cold glass come from water vapour in the air. This is condensation.
  • Some solids turn straight into vapour on heating, without melting first. Examples are iodine, camphor and naphthalene balls. This is called sublimation.

Remember

  • Boiling: fast, all through the liquid, at the boiling point.
  • Evaporation: slow, only at the surface, at any temperature.
  • Water boils at 100 °C and freezes at 0 °C.
  • Heating moves particles apart; cooling brings them closer.
Quick checkWhy do bubbles form when water boils but not when a puddle dries up?Show answer

At the boiling point, vapour forms all through the liquid, so bubbles appear. In evaporation, particles escape only from the surface, so there are no bubbles.

8The gaseous state

Smoke in gas jars (Activity)

  1. Hold an empty gas jar A upside down over a burning incense stick. It fills with smoke.
  2. Turn it upright and cover it with a glass plate.
  3. Place an empty jar B upside down on the plate.
  4. Slide the plate out slowly, with no gap between the jars.

Safety: take care with a burning incense stick.

Smoke spreading in gas jars. (a) Jar A is held upside down over a burning incense stick and fills with smoke. (b) Jar A is turned upright and covered with a glass plate. (c) Empty jar B is placed upside down on A and the plate is slid out. The smoke spreads up until it fills both jars evenly.AAglass plateAB(a) collectthe smoke(b) coverwith a plate(c) smoke fillsboth jars
Figure 11. Smoke spreads to fill both jars.
  • The smoke spreads upwards and fills both jars evenly.
  • A gas has no fixed volume. It spreads to fill all the space it can reach.
  • A gas also takes the shape of its container: no fixed shape.
  • Smoke specks are pushed about by the invisible, moving particles of air. So smoke lets us “see” how gas particles move.
  • Iodine vapour can be used instead of smoke. A little solid iodine in a closed jar gives a violet vapour that fills the jar.

Safety: iodine vapour irritates the eyes and nose. Use it only with a teacher.

Gas

A state of matter with no fixed shape and no fixed volume. It fills the whole of any container.

Particles in a gas

  • Very far apart, with large empty spaces between them.
  • Attraction between them is negligible (almost none).
  • They move freely and fast in all directions.

Fluid

Anything that can flow and has no fixed shape. Liquids and gases are both fluids. Solids are not.

Remember

  • Gases have no fixed shape and no fixed volume.
  • Gas particles are far apart and move freely.
  • A gas fills its whole container.
  • Liquids and gases flow, so both are fluids.
Quick checkA balloon is blown up. Why does the air fill the whole balloon and not just its bottom?Show answer

Air particles have almost no attraction for each other and move freely in all directions. So they spread out to fill all the space inside.

9Spaces between particles

Squashing air and water (Activity)

  1. Pull the plunger of a syringe (with no needle) all the way out.
  2. Close the open end with your thumb.
  3. Push the plunger in slowly.
  4. Repeat with the syringe full of water.
Squashing air and water in a syringe whose nozzle is closed by a thumb. With air, the plunger can be pushed a long way in, because the air particles have big gaps between them and are pressed closer. With water, the plunger hardly moves, because the particles are already close.Air can be squashedplunger pulled out: particles far apartpushed in: the same particles, closerWater hardly squashesplunger pulled out: particles closepush hard: it hardly moves
Figure 12. Air squashes; water hardly does.
  • Air: the plunger goes in a long way. The particles are pushed closer, so the volume of air becomes smaller.
  • Let go and the plunger springs back. The particles spread out again.
  • Water: the plunger hardly moves. Water is practically incompressible.
  • So a gas has a lot of space between its particles. A liquid has very little.

Sugar and the water level (Activity)

  1. Half fill a glass vessel with water. Mark the level A.
  2. Add two teaspoons of sugar. Mark the new level B.
  3. Stir with a glass rod until the sugar dissolves.
  4. Mark the final level C.
Sugar and the water level. (a) Water in a beaker, level marked A. (b) Two spoons of sugar are added; the level rises to B. (c) The sugar is stirred with a glass rod until it dissolves. (d) The level falls a little, to C: above A but below B.ABABACglass rod(a) water,level A(b) sugar in,level B(c) stirto dissolve(d) dissolved,level C
Figure 13. The level falls a little as the sugar dissolves.
  • Adding sugar raises the level from A to B.
  • After dissolving, the level falls a little to C.
  • The solution takes up less volume than the water and sugar did separately.
  • This shows there are spaces between water particles. Sugar particles fit into them.

Soluble and insoluble solids

Sugar and sand in water, with magnified views. Left: sugar has dissolved; its particles are spread among the water particles. Right: sand has settled at the bottom; each grain stays whole, its particles held tightly together, with water particles only around it.Sugar dissolvesits particles fill the gapsSand does notgrains settle, stay whole
Figure 14. Sugar dissolves; sand settles.
Sugar, salt, glucoseSand, stone pieces
In waterDissolve (soluble)Do not dissolve (insoluble)
What happensParticles spread into the spaces between water particlesGrains stay whole and settle at the bottom
Volume after mixingRises only a littleRises by the full volume of the solid
  • Water particles pull sugar particles out of the grain. In sand, the particles hold each other too strongly.
  • Solids also have spaces between their particles, even though they are closely packed.
  • These spaces are empty. They do not contain air.

Remember

  • Spaces between particles: least in solids, more in liquids, most in gases.
  • Gases can be compressed; liquids and solids hardly at all.
  • Dissolved sugar fills spaces between water particles.
  • The spaces between particles are empty, not full of air.
Quick checkWhy can a lot of air be pumped into a bicycle tyre, but water cannot be squeezed into a full bottle?Show answer

Air particles have large spaces between them, so pumping pushes them closer. Water particles are already close, so water hardly compresses.

10Particles are always moving: diffusion

Colour spreading in water (Activity)

Drop a few grains of potassium permanganate into a glass of still water. Do not stir.

Safety: do not touch potassium permanganate. Use a spoon or a spatula.

Potassium permanganate in water. (a) Soon after a few grains are dropped in, purple streaks spread up and out from them. (b) After some time the whole of the water has one even purple colour, without any stirring.potassiumpermanganate(a) streaks spread out(b) later: all purple
Figure 15. The colour spreads with no stirring.
  • First, purple streaks spread out from the grains.
  • Later, all the water has the same purple colour.
  • Water particles are always moving. They pull particles out of the grain.
  • Then they keep hitting them, so the colour spreads through all the water.

Diffusion

The spreading of particles of one substance through another because the particles are always moving. It needs no stirring or wind.

Effect of temperature

Three tumblers, a few minutes after a grain of potassium permanganate was dropped into each. The colour has spread most in hot water, less in water at room temperature and least in ice-cold water.70 °Chot25 °Croom temperature2 °Cice-coldfastestslowerslowest
Figure 16. Hotter water, faster spreading.
WaterSpeed of water particlesColour spreads
HotFastestFastest
Room temperatureSlowerSlower
Ice-coldSlowestSlowest

Rule: heating makes particles move faster, so diffusion is faster.

Smell spreading through air (Activity)

Light an incense stick in one corner of a room. Wait a few minutes.

A burning incense stick on a small table in one corner of a room. Its fragrance particles, drawn as purple dots, spread out through the air. A girl standing far away by the window can soon smell it.fragrance particles spread out
Figure 17. Fragrance particles spread through the room.
  • At first, the fragrance is noticed only near the stick. Soon it reaches every part of the room.
  • Air particles are moving all the time. They hit the fragrance particles and spread them out.
  • Other examples: the smell of perfume, cooking food or a gas leak reaches you from a distance.
  • Diffusion is fastest in gases, slower in liquids and extremely slow in solids.

Remember

  • The particles of matter are always moving.
  • Diffusion: particles spread out on their own.
  • Hotter means faster particles and faster diffusion.
  • Smells reach us by diffusion through air.
Quick checkWhy does a cup of hot tea smell stronger than a cup of cold tea?Show answer

In hot tea the particles move faster. More scent particles escape and diffuse through the air to your nose quickly.

11Solids, liquids and gases compared

The three states compared

FeatureSolidLiquidGas
SpacingLeastA bit moreMost
PackingCloseA bit looserFar apart
AttractionStrongestA bit weakerNegligible
MovementVibrate onlyWithin the liquidEverywhere
ShapeFixedNot fixedNot fixed
VolumeFixedFixedNot fixed
Squash it?Almost noVery littleEasily
FlowNoYesYes
ExamplesIce, ironWater, oilAir, steam
FeatureSolid, liquid, gas
SpacingSolid: Least
Liquid: A bit more
Gas: Most
PackingSolid: Close
Liquid: A bit looser
Gas: Far apart
AttractionSolid: Strongest
Liquid: A bit weaker
Gas: Negligible
MovementSolid: Vibrate only
Liquid: Within the liquid
Gas: Everywhere
ShapeSolid: Fixed
Liquid: Not fixed
Gas: Not fixed
VolumeSolid: Fixed
Liquid: Fixed
Gas: Not fixed
Squash it?Solid: Almost no
Liquid: Very little
Gas: Easily
FlowSolid: No
Liquid: Yes
Gas: Yes
ExamplesSolid: Ice, iron
Liquid: Water, oil
Gas: Air, steam

Energy decides the state

  • The thermal energy of the particles decides the state.
  • Low energy: particles stay close and only vibrate. Solid.
  • At the melting point, energy overcomes part of the attraction. Particles move around but stay close. Liquid.
  • Enough energy to overcome the attraction: particles move freely in all directions. Gas.

Ever heard of it? How soap cleans

How soap cleans. Each soap particle has a head that mixes with water and a tail that attaches to oil. Many soap particles gather round an oily stain on cloth, lift the oil off and keep it wrapped up in the water, so it washes away.soap gathersround the oiloil lifts offhead mixes with watertail holds the oil
Figure 18. Soap particles lift oil off cloth.
  • Each soap particle has two ends. One end attaches to oil. The other end mixes with water.
  • Many soap particles surround the oil on a dirty cloth.
  • They lift the oil off and hold it in the water, so it rinses away.

Common mistakes

  • “Particles in a solid do not move.” Wrong: they vibrate in fixed places.
  • “The gaps between particles are full of air.” Wrong: the gaps are empty.
  • “Particles get bigger when heated.” Wrong: they move faster and further apart. The particles stay the same size.
  • “Powders such as flour are liquids because they pour.” Wrong: each grain is a solid with its own fixed shape.

Remember

  • Solid: fixed shape and volume. Liquid: fixed volume only. Gas: neither.
  • Attraction: solid > liquid > gas. Spacing: gas > liquid > solid.
  • Thermal energy decides the state of matter.
  • Soap particles hold oil at one end and water at the other.
Quick checkWhich state of matter has a fixed volume but no fixed shape?Show answer

A liquid. Its particles stay close (fixed volume) but can slide past each other (no fixed shape).

Test yourselfTake the 16-question practice quiz on this chapter.