In this chapter 8 topics
1Measuring time long ago
We plan our whole day by time: when school starts, how long a class lasts, when the bus leaves. Long before clocks and watches, people still needed to measure time. They did it by watching things that happen again and again, with equal gaps of time in between.
Periodic event
A periodic event is an event that repeats itself after equal intervals of time. An interval is a gap of time between two events. Examples of periodic events: sunrise each day, the changing shape of the Moon through the month, and the beating of the heart. Any steady, repeating event can be used to measure time.
Nature gave people three long units of time:
- A day is the time from one sunrise to the next.
- A month is roughly the time from one new moon (no Moon in the sky) to the next.
- A year is the time the Earth takes to go once round the Sun.
For shorter intervals, people built special devices.
Time-measuring devices of the past
| Device | How it works | A drawback |
|---|---|---|
| Sundial | The shadow of a stick or a slanting edge moves across a marked dial as the Sun moves across the sky. | Useless at night and on cloudy days |
| Water clock | Water drips out of a marked pot, or a bowl with a tiny hole slowly fills and sinks. | Must be refilled or reset again and again |
| Hourglass | A fixed amount of sand runs from the upper bulb to the lower one through a narrow neck. | Measures only one fixed interval |
| Candle clock | A candle with marks burns down by one mark in each equal interval. | Wind and the type of wax change the rate |
Timekeeping in India
- The Samrat Yantra at Jantar Mantar in Jaipur is a giant stone sundial, about 27 m high. Its shadow moves so fast that it can show time to about 2 seconds. It shows local time by the Sun. This has to be adjusted to get Indian Standard Time, the time shown on our clocks.
- Old Indian texts describe measuring time by shadows and with water clocks. The ghatika-yantra was a copper bowl with a tiny hole in its base. It was floated on water. Water slowly came in through the hole, and the bowl sank after a fixed time. Each time it sank, someone beat a drum, struck a gong or blew a conch. Then the bowl was emptied and floated again.
- The bowl took 24 minutes to sink. This interval was called a ghati (or ghatika). A day was divided into 60 ghatis.
Let us check that 60 ghatis make one day. First, change one day into minutes. There are 24 hours in a day, and 60 minutes in each hour:
Each ghati is 24 minutes. To find how many 24-minute pieces fit into 1440 minutes, we divide:
Remember
- A periodic event repeats after equal intervals of time; it can be used to measure time.
- Sundials, water clocks, hourglasses and candle clocks were used before modern clocks.
- The ghatika-yantra sank every 24 minutes: one ghati. A day had 60 ghatis.
Quick checkWhy could a sundial not be used to tell the time at night?Show answer
A sundial works only when the Sun casts a shadow. At night (and on cloudy days) there is no sunlight, so there is no shadow to read.
2The simple pendulum
A swing in a park goes to and fro again and again. Each to-and-fro swing seems to take the same time. A simple pendulum uses this to keep time.
Simple pendulum
A simple pendulum is a small heavy ball, called the bob, hung by a long, thin thread from a fixed support. The thread must not stretch.
You can make one with a stone or a metal nut tied to a thread, hung from a nail or a table edge.
Words to know
- Mean position (O): where the bob hangs at rest, straight below the support.
- Extreme positions (A and B): the two farthest points the bob reaches on either side as it swings.
- Oscillation: one complete to-and-fro swing. Starting from O, the bob goes to A, comes back through O to B, and returns to O. (Starting from A, it goes to B and back to A.)
- Time period: the time taken to complete one oscillation.
- Length of the pendulum: from the support to the centre of the bob.
The to-and-fro motion of the bob is an example of oscillatory (or periodic) motion. It repeats itself after equal intervals of time.
Measuring the time period
One oscillation is over in a second or two. That is too quick to time well with a stopwatch. You always take a moment to press the button, and that small delay would be a big part of the answer. So we time many oscillations together, then divide.
- Pull the bob a little to one side and let it go gently. Do not push it.
- Start the stopwatch when the bob is at one extreme position.
- Count 20 oscillations and stop the watch.
- Divide the total time by 20. Repeat a few times. The answers come out almost the same.
Worked example 1
A pendulum completes 20 oscillations in 36 s. What is its time period?
- Given
- 20 oscillations in 36 s
- Find
- time period (time for one oscillation)
Solution
- We want the time for one oscillation.
- All 20 oscillations take the same time. So we share the total time, 36 s, equally among the 20 oscillations.
- Sharing equally means dividing: total time divided by the number of oscillations.
The time period is 1.8 s.
Remember
- A simple pendulum is a bob hung by a thread from a fixed support.
- One oscillation: O to A, back through O to B, and back to O.
- Time period = time for one oscillation. Time 20 oscillations and divide by 20.
Quick checkA pendulum takes 30 s to make 20 oscillations. Find its time period.Show answer
3What changes the time period?
What decides the time period of a pendulum? It could be how heavy the bob is, how far it swings, or how long the thread is. We can find out by a fair test: change one thing at a time and keep everything else the same (see Figure 3).
What the experiments show
- Length: a longer pendulum swings more slowly. Its time period is longer. A shorter pendulum has a shorter time period.
- Mass of the bob (how heavy it is): a heavier or lighter bob does not change the time period, as long as the thread stays the same length.
- How far it swings: pull the bob only a little to one side. Then a small change in how far it swings hardly changes the time period.
Rule
At a given place, the time period of a simple pendulum depends on its length, not on the mass of its bob. Pendulums of the same length have the same time period.
| Length of the pendulum | Time period (about) |
|---|---|
| 10 cm | 0.63 s |
| 25 cm | 1.00 s |
| 50 cm | 1.42 s |
| 100 cm | 2.01 s |
Look at the table. A pendulum 100 cm long takes about twice as long for each oscillation as one 25 cm long. For a given length, the time period stays the same. So a pendulum is a good way to measure equal intervals of time.
From a swinging lamp to the pendulum clock
Galileo Galilei was an Italian scientist. One day he noticed a lamp swinging in a church. He timed its swings using his pulse, the steady beat you can feel at your wrist. He found that each swing took the same time, even as the swings became smaller.
Later, Christiaan Huygens, a Dutch scientist, used this idea. He built the first pendulum clock in 1656. Pendulum clocks kept time far better than anything before them.
Remember
- A longer pendulum has a longer time period.
- The mass of the bob does not change the time period.
- For small swings, how far the bob swings hardly matters.
- Galileo noticed the regular swing; Huygens built the pendulum clock.
Quick checkRani has two pendulums, each 50 cm long. One bob is made of iron and the other of wood. Which one has the longer time period?Show answer
Neither. Both have the same length, so they have the same time period. The mass of the bob does not matter.
4Modern clocks and units of time
Every clock works on the same idea. Something repeats at regular intervals, and the clock counts the repeats. In a pendulum clock it is the swing of a pendulum.
- Quartz clocks and watches have a tiny piece of a crystal called quartz. When a small electric current from the battery flows, the crystal shakes (vibrates) a very large number of times every second. The clock counts these. Most wall clocks and wristwatches today are quartz clocks.
- Atomic clocks count the vibrations of atoms, the tiniest bits of a substance. They are so accurate that they would gain or lose only about one second in millions of years. They are used in satellites and in GPS, the system that helps map apps find your location. They also set the standard time of a country.
Units of time
Scientists all over the world use the same set of units, called SI units. This way everyone understands each other’s measurements.
SI unit of time
The SI unit of time is the second, written s. Larger units are the minute (min) and the hour (h).
| Unit | Symbol | In seconds |
|---|---|---|
| second | s | 1 s |
| minute | min | 60 s |
| hour | h | 60 min = 3600 s |
| day | d | 24 h = 86400 s |
Some events are far quicker than a second. A millisecond (ms) is a thousandth of a second. Races are timed to a hundredth or even a thousandth of a second. Computers do their work in millionths of a second.
Writing units correctly
- Write unit names and symbols in small letters: second, s; hour, h (not Sec or H).
- Symbols have no plural: write 5 s, not 5 secs. Do not put a full stop after a symbol, unless the sentence ends there.
- Leave a space between the number and the symbol: 10 min, not 10min.
| Correct | Not correct |
|---|---|
| 20 s | 20 sec, 20 secs, 20 Sec |
| 3 h | 3 hrs, 3 hr., 3 Hrs |
| 45 min | 45 mins, 45min |
Worked example 2
A film lasts 2 h 15 min. How long is this in seconds?
- Given
- 2 h 15 min
- Find
- time in s
Solution
- We want the whole time in seconds, so we change each part into seconds and then add.
- Each hour is 3600 s, so 2 h is 2 × 3600 s.
- Each minute is 60 s, so 15 min is 15 × 60 s.
The film lasts 8100 s.
Worked example 3
A train journey takes 5400 s. Express this in hours.
- Given
- 5400 s
- Find
- time in h
Solution
- We want the time in hours.
- One hour is 3600 s. So we find how many lots of 3600 s fit into 5400 s.
- To find how many times one number fits into another, we divide.
The journey takes 1.5 h (1 hour 30 minutes).
Remember
- Clocks count something that repeats regularly: a pendulum, a quartz crystal or atoms.
- SI unit of time: second (s). 60 s = 1 min; 60 min = 1 h.
- Write 5 s, 2 h, 10 min: small letters, no plural, a space before the symbol.
Quick checkRewrite correctly: “The race took 12 Secs and the match lasted 2 hrs.”Show answer
The race took 12 s and the match lasted 2 h.
5Slow or fast?
In a race, how do we decide who is fastest? It depends on what is kept the same.
- Same distance: in a 100 m race, everyone runs the same distance. The runner who takes the least time is the fastest.
- Same time: if everyone cycles for 10 minutes, the one who covers the greatest distance is the fastest.
| Runner | Distance | Time taken |
|---|---|---|
| Aman | 100 m | 16 s |
| Meera | 100 m | 14 s |
| Joseph | 100 m | 15 s |
Here all three run 100 m. Meera takes the least time, so she is the fastest. Aman takes the most time, so he is the slowest.
When distances and times are both different
Suppose Kiran walks 300 m in 5 minutes, and Salma walks 400 m in 8 minutes. Kiran covers less distance, but also takes less time. So who is faster? We cannot tell yet.
To compare fairly, we find the distance each one covers in the same time, say in one minute. Kiran walks steadily for 5 minutes. So we share his 300 m equally among the 5 minutes, by dividing:
In the same way, we share Salma’s 400 m equally among her 8 minutes:
Kiran covers more distance in each minute, so Kiran walks faster. The distance covered in one unit of time (here, one minute) is called speed.
Remember
- Same distance: less time means faster.
- Same time: more distance means faster.
- Otherwise, compare the distance covered in one unit of time: the speed.
Quick checkIn 10 minutes, a bus goes 6 km and a scooter goes 5 km. Which is faster?Show answer
The bus. In the same time it covers the greater distance.
6Speed and its units
Speed
The speed of an object is the distance it covers in a unit of time, such as one second or one hour.
The speed of a moving object usually changes during a journey. A bus slows down at stops and speeds up on open roads. So the formula above gives the average speed. This is the steady speed that would cover the same distance in the same time. In this chapter, “speed” means average speed.
Units of speed
Speed is a distance divided by a time. So its unit is a unit of distance per unit of time. (“Per” means “in each”.)
- The SI unit of speed is metre per second, written m/s. It means metres covered in each second.
- For vehicles we often use kilometre per hour, written km/h. It means kilometres covered in each hour.
Worked example 4
A cyclist rides 3 km in 10 min. Find her speed in m/s.
- Given
- 3 km = 3000 m10 min = 10 × 60 s = 600 s
- Find
- speed
Solution
- We want her speed in m/s, that is, metres in each second.
- So first we change the distance into metres and the time into seconds (see “Given”).
- Then we divide the distance by the time, as the speed formula says.
Her speed is 5 m/s.
Changing between km/h and m/s
Remember that 1 km = 1000 m and 1 h = 3600 s.
From km/h to m/s. A speed of 1 km/h means 1000 m in 3600 s. To find the metres in one second, divide:
From m/s to km/h. A speed of 1 m/s means 1 m in each second. In one hour (3600 s) that is 3600 m. Then change 3600 m into km by dividing by 1000:
| To change | Do this |
|---|---|
| km/h into m/s | multiply by 518 |
| m/s into km/h | multiply by 3.6 (that is, by 185) |
Worked example 5
A car moves at 72 km/h. What is its speed in m/s?
- Given
- 72 km/h
- Find
- speed in m/s
Solution
- We want the same speed in metres per second.
- Each 1 km/h is 1000 m in 3600 s. So 72 km/h is 72 times that.
- Multiply out the top, then divide.
The car moves at 20 m/s.
Speedometer and odometer
A vehicle’s speedometer shows its speed at that moment, usually in km/h. Its odometer shows the total distance the vehicle has travelled, in km. Read the odometer at the start and at the end of a trip. The difference between the two readings is the distance of the trip.
Remember
- Speed = total distance covered divided by total time taken (average speed).
- SI unit of speed: m/s. Vehicles: km/h.
- 1 km/h = 518 m/s; 1 m/s = 3.6 km/h.
- Speedometer: speed now. Odometer: distance travelled.
Quick checkA boy runs 200 m in 25 s. What is his speed in m/s, and in km/h?Show answer
7Finding distance and time from speed
The speed formula links three quantities: speed, distance and time. If we know any two, we can find the third.
| To find | Use |
|---|---|
| Speed | DistanceTime |
| Distance | Speed × Time |
| Time | DistanceSpeed |
Why do these work? Think of a bus at 45 km/h. It goes 45 km in each hour. In 3 hours it goes 45 km three times (see Figure 7). That is why distance = speed × time.
Always use matching units. If the speed is in km/h, take the distance in km and the time in h. If the speed is in m/s, use m and s.
Worked example 6
A bus moves at 45 km/h for 3 h. How far does it go?
- Given
- Speed = 45 km/hTime = 3 h
- Find
- distance
Solution
- We want the distance.
- The bus covers 45 km in each hour, for 3 hours. So we multiply speed by time.
- The units match (km/h and h), so the answer comes out in km.
The bus goes 135 km.
Worked example 7
A car has to travel 240 km at 60 km/h. How long will it take?
- Given
- Distance = 240 kmSpeed = 60 km/h
- Find
- time
Solution
- We want the time.
- The car covers 60 km in each hour. So we find how many lots of 60 km fit into 240 km.
- That means dividing the distance by the speed.
The car takes 4 h.
Using a timetable
Railway timetables use the 24-hour clock, so 13:00 means 1 o’clock in the afternoon. A train leaves station P at 9:30 and reaches station Q at 13:00. The two stations are 280 km apart. What is the train’s average speed?
- First find the time taken. From 9:30 to 12:30 is 3 h. From 12:30 to 13:00 is 30 min more. So the journey takes 3 h 30 min.
- 30 min is half an hour, or 0.5 h. So 3 h 30 min is 3.5 h.
- Now divide the distance by the time:
Remember
- Distance = Speed × Time.
- Time = Distance divided by Speed.
- Use matching units: km with h, m with s.
Quick checkHow long does a cyclist moving at 5 m/s take to cover 1.5 km?Show answer
The speed is in m/s, so first change the distance into metres: 1.5 km = 1500 m. Then divide the distance by the speed.
8Uniform and non-uniform linear motion
When an object moves along a straight line, its motion is called linear motion. A car on a straight road and a stone dropped from a height both move in a straight line.
Uniform linear motion
An object in uniform linear motion moves along a straight line at a constant (unchanging) speed. It covers equal distances in equal intervals of time.
Non-uniform linear motion
An object in non-uniform linear motion moves along a straight line, but its speed changes. It covers unequal distances in equal intervals of time.
Checking from a table
Two scooters were watched on a straight road. The distance each covered in every minute was noted.
| Minute | Scooter X | Scooter Y |
|---|---|---|
| 1st | 500 m | 400 m |
| 2nd | 500 m | 600 m |
| 3rd | 500 m | 300 m |
| 4th | 500 m | 700 m |
- Scooter X covers 500 m in every minute. So its motion is uniform.
- Scooter Y covers different distances in equal minutes. So its motion is non-uniform.
Now add up each column. Both scooters cover 2000 m in 4 min. So both have the same average speed:
In daily life
Perfectly uniform motion is rare. Vehicles slow down for traffic, turns and stops. A runner speeds up at the start of a race. Still, uniform motion is a useful idea. Some real cases come close to it, such as a train running steadily on a long, straight track.
Remember
- Uniform linear motion: straight line, constant speed, equal distances in equal times.
- Non-uniform linear motion: straight line, changing speed, unequal distances in equal times.
- Most motion in daily life is non-uniform; we then use average speed.
Quick checkA ball rolls 3 m in the first second, 2 m in the next and 1 m in the third, along a straight line. Is its motion uniform?Show answer
No. It covers unequal distances in equal intervals of time, so its motion is non-uniform. It is slowing down.