Chapter 11 · Science

Light: Shadows and Reflections

Sources of light, how light travels in straight lines, transparent, translucent and opaque materials, how shadows form and change size, reflection and images in a plane mirror, the pinhole camera, the periscope and the kaleidoscope.

Done reading? Try the Shadows and mirrors activity on this chapter.
In this chapter 8 topics
  1. 1Sources of light: luminous and non-luminous objects
  2. 2Light travels in a straight line
  3. 3Transparent, translucent and opaque materials
  4. 4How shadows are formed
  5. 5Reflection of light
  6. 6Images in a plane mirror
  7. 7The pinhole camera
  8. 8Useful things made with mirrors: periscope and kaleidoscope

1Sources of light: luminous and non-luminous objects

We see things only when light from them reaches our eyes. In a completely dark room you cannot see anything at all. You cannot see even a white sheet of paper.

Luminous and non-luminous objects

Objects that give out light of their own are called luminous objects. A candle flame and the Sun are examples. Objects that do not give out their own light are non-luminous objects, such as a book or a chair. We see them because light from a luminous object falls on them and bounces into our eyes.

Natural and man-made sources

Natural sourcesMan-made (artificial) sources
The Sun and other starsOil lamp (diya), candle, lantern
LightningTorch, electric bulb, tube light
Fire in a forestLED lamp, street light
Fireflies and some sea creaturesMobile phone screen, television

The Sun is the main source of light for the Earth. People have made light in many ways over time:

  1. long ago, by burning wood;
  2. then by burning animal fat, oil and wax in lamps and candles;
  3. then with gas lamps;
  4. today, mostly with electric lamps.

LED lamps give as much light as old bulbs but use much less electricity. They also last much longer. When an LED lamp stops working, take it to a recycling centre. Do not throw it in the dustbin.

Is the Moon luminous?

No. The Moon looks bright at night, but it has no light of its own. Sunlight falls on it, and part of that light bounces back to the Earth. Planets such as Venus and Mars shine in the night sky for the same reason. A mirror also only sends back light that falls on it. So a mirror is non-luminous too.

Light from the glowing Sun falls on the Moon, and the Moon sends some of it on to our eyes. The Sun is luminous; the Moon is not, as it has no light of its own.Sunmakes its own lightMoononly sends back sunlightWe see theMoon
Figure 1. We see the Moon by sunlight that it sends back towards the Earth.

Remember

  • Luminous objects give out their own light: the Sun, stars, a candle flame, a lit bulb.
  • Non-luminous objects, such as the Moon, a mirror, a book, are seen by the light they send back.
  • LED lamps save electricity and last long; recycle them when they stop working.
Quick checkIs a lit candle luminous? Is the candle still luminous after the flame is blown out?Show answer

A lit candle is luminous because its flame gives out light. Once the flame is out, the candle gives no light of its own. So it is non-luminous.

2Light travels in a straight line

Look through a long, straight pipe at a candle flame. You can see the flame. Now bend the pipe and look again. The flame disappears, even though the pipe is still open at both ends.

Top: a candle flame seen through a straight grey pipe, because light goes straight along it to the eye. Bottom: the pipe is bent, so the straight light hits the wall of the pipe at the bend and cannot reach the eye.Straight pipe: the flame is seenBent pipe: the light is blocked at the bend
Figure 2. A candle flame through a straight pipe and through a bent pipe.

Why? Light cannot follow the bend. It keeps going straight, hits the inside wall of the pipe at the bend, and stops there. So it never reaches your eye. This shows that light travels in a straight line.

The matchbox test

  1. Make a hole in the middle of each of three empty matchboxes (or cards).
  2. Stand them in a row.
  3. Place a candle at one end and look from the other end.

You see the flame only when all three holes are exactly in a straight line. Move just one box a little to the side, and the flame is hidden.

Rays and beams

Ray and beam

A ray of light is the straight path along which light travels. We draw it as a straight line with an arrow. A bundle of many rays together is a beam of light, like the light from a torch.

You can actually see a beam in a dusty room or in smoke. You can also see one when sunlight comes through a gap in a roof. A laser pointer shone through water with a few drops of milk in it shows a perfectly straight path. (Never shine a laser pointer into anyone’s eyes.)

Remember

  • Light travels in a straight line.
  • A ray is drawn as a straight line with an arrow; many rays together make a beam.
  • We can see a light source through holes only when the holes are in one straight line.
Quick checkWhy can you not see a friend standing round the corner of a wall, even though you can hear them?Show answer

Light from your friend travels only in straight lines. It cannot bend round the corner to reach your eyes. (Sound can spread round corners, so you can still hear them.)

3Transparent, translucent and opaque materials

Hold different things between a torch and a wall. See how much light gets through each one.

Light from a glowing bulb falls on three sheets. Clear glass lets almost all the light through (transparent). Butter paper lets some light through (translucent). A wooden board lets no light through (opaque).Clear glassTransparentButter paperTranslucentno lightWooden boardOpaque
Figure 3. Transparent, translucent and opaque materials.
MaterialLight that passesExamples
TransparentAlmost all; we see clearly through itClear glass, clean water, air, clear plastic
TranslucentOnly some; we see only dimly through itButter paper, frosted glass, oiled paper, thin cloth
OpaqueNone; we cannot see through itWood, cardboard, metal, stone, a brick wall

Here is a handy test. Place the sheet over a page of your book.

  • If you can read the print clearly, the sheet is transparent.
  • If light comes through but the print is blurry, it is translucent.
  • If nothing shows through, it is opaque.

Thickness matters too. A single sheet of paper is translucent. But a thick stack of paper is opaque.

Remember

  • Transparent: almost all light passes (clear glass).
  • Translucent: some light passes (butter paper).
  • Opaque: no light passes (wood, metal).
Quick checkBathroom windows often have frosted glass. Why?Show answer

Frosted glass is translucent. It lets light into the bathroom. But people outside cannot see clearly through it, so it keeps privacy.

4How shadows are formed

Sometimes an opaque object comes in the way of light. The light cannot pass through it or bend round it. So no light reaches the place just behind the object. A dark patch is left there.

Shadow

A shadow is the dark area formed behind an opaque object when it blocks light.

To see a shadow you need three things:

  • a source of light, such as a torch or the Sun;
  • an opaque object, such as your hand;
  • a screen: a surface on which the shadow falls, such as a wall, the floor or the ground.
A torch on the left shines on an opaque wooden block in the middle. Straight rays from the torch just pass the top and bottom edges of the block and reach the white screen on the right. Between them, no light reaches the screen, and this dark patch is the shadow.Light sourceOpaque objectScreenShadowLight rays pass the edges of the object in straight lines.
Figure 4. A shadow forms where the object stops the light from reaching the screen.

What a shadow tells us

  • A shadow forms only because light travels in a straight line. The rays that just graze the edges of the object mark the outline of the shadow.
  • The shadow is always on the side of the object away from the light.
  • A shadow shows the outline of an object, but not its colour or details. A red ball and a blue ball give the same dark shadow.
  • Opaque objects give dark shadows. Translucent objects give lighter, fainter shadows. Transparent objects let almost all light through, so they give hardly any shadow. (Thick glass may give a very faint one.)
  • The shape of the shadow depends on which way the object faces the light. Think of an ice-cream cone. Shine a torch on its round top, and the shadow is a circle. Shine it from the side, and the shadow is a triangle.

How big is the shadow?

Keep the torch and the screen still. Move the object between them.

  • Object closer to the torch: the edge rays have a long way to spread out before they reach the screen. So the shadow is larger.
  • Object closer to the screen: the rays have little room to spread. So the shadow is smaller, almost the size of the object.

Try it with your hand and a torch at night. Bring your hand near the torch and watch its shadow on the wall grow huge.

Two set-ups with the same torch, ball and wall. Top: the ball is close to the torch, so the rays passing its edges spread far apart before reaching the wall and the shadow is large. Bottom: the ball is close to the wall, so the rays have little room to spread and the shadow is only a little bigger than the ball.(i) Ball close to the torch: large shadow(ii) Ball close to the wall: small shadow
Figure 5. The same ball gives a large shadow near the torch and a small one near the wall.

The edge rays are straight lines that start from one small point, the torch bulb. So the shadow grows in a simple way. Say the screen is 3 times as far from the torch as the object is. Then the shadow is 3 times as tall as the object. For a small torch:

shadow height=object height × distance from torch to screendistance from torch to object

For example, a card is 10 cm tall. It is 20 cm from a torch. The screen is 60 cm from the torch.

shadow height=10 cm × 60 cm20 cm=10 cm × 3=30 cm

So the shadow is 30 cm tall, three times the height of the card.

Shadows outdoors change in the same way. In the early morning and late afternoon, the Sun is low in the sky. Its light comes in at a slant, so our shadows are long. At about noon the Sun is high overhead. Its light comes almost straight down, so our shadow is shortest. You can see the same thing at home. Hold a torch low beside a water bottle, and the bottle’s shadow is long. Hold the torch high above it, and the shadow is short.

Shadow puppets

Shadow puppetry is an old art in many parts of India. Puppets made of leather are held between a lamp and a cloth screen. The audience watches their shadows on the screen. Some of its forms are Tholu Bommalata (Andhra Pradesh), Ravana Chhaya (Odisha), Tholpavakoothu (Kerala) and Charma Bahuli Natya (Maharashtra).

Remember

  • A shadow needs a light source, an opaque object and a screen.
  • Shadows form because light travels in straight lines.
  • A shadow is dark whatever the colour of the object.
  • Object nearer the light: bigger shadow. Object nearer the screen: smaller shadow.
Quick checkA torch is 20 cm from a ball and 80 cm from a wall. The ball is 5 cm across. How wide is its shadow?Show answer
shadow width=5 cm × 80 cm20 cm=5 cm × 4=20 cm
Try it yourselfMove a ball between a torch and a wall to watch its shadow change, then type a word to see how a mirror shows it.

5Reflection of light

On a sunny day, hold a small mirror in the sunlight. You can make a bright patch of light dance on a shady wall. The mirror is turning the sunlight in a new direction.

Reflection

When light falls on a mirror or any shiny, smooth surface, it bounces back in a new direction. This is called reflection of light.

A torch shines a narrow beam down on to a flat mirror lying on a table. The light bounces off the mirror and goes up on the other side. The mirror has changed the direction of the light.Plane mirrorLight fallingon the mirrorLight sent back(reflected)
Figure 6. A mirror changes the direction of a beam of light.

To see the path of light:

  1. Cover a torch with black paper that has a narrow cut (a slit) in it.
  2. Place a comb in front of it. Its gaps split the light into thin beams.
  3. Let the beams fall on a mirror standing on a sheet of paper.

The beams come in straight, change direction at the mirror, and go out straight again. Tilt the mirror, and the reflected beams move.

All objects reflect some light. That is how we see non-luminous things. A smooth, shiny surface reflects light neatly, so we can see images in it. Examples are a mirror, a steel plate and still water. A rough surface, such as a wall, scatters light in all directions. So it shows no image.

Most mirrors have a coating of a shiny metal, such as silver or aluminium, behind the glass. In Aranmula in Kerala, craftspeople make a famous mirror without glass. This Aranmula kannadi is made from a polished alloy, which is a mixture of metals.

Remember

  • Reflection: light bouncing back from a surface in a new direction.
  • Smooth, shiny surfaces reflect light well and form images.
  • Light still travels in straight lines before and after it is reflected.
Quick checkWhy can you see your face in a still pond but not in a rippling one?Show answer

Still water has a smooth surface. It reflects light neatly and forms a clear image. Ripples make the surface uneven. Then the light is reflected in many directions, and the image breaks up.

6Images in a plane mirror

A flat mirror is called a plane mirror. The picture of yourself or of any object that you see in it is called an image.

A candle stands 30 cm in front of a plane mirror. Its image is upright, the same size, and appears 30 cm behind the mirror.30 cm30 cmObjectImagePlane mirror
Figure 7. The image is as far behind the mirror as the object is in front of it.

Properties of the image in a plane mirror

  • It is erect (upright), not upside down.
  • It is the same size as the object.
  • It appears as far behind the mirror as the object is in front of it. Step back from a mirror, and your image moves back too.
  • It cannot be caught on a screen. Put a sheet of paper behind the mirror where the image seems to be. Nothing appears on it.
  • Its left and right are swapped. This is called lateral inversion (explained below).

Try this. Stand in front of a mirror and raise your right hand. Your image seems to raise its left hand. Now hold up a page with your name on it. In the mirror, the writing runs from right to left.

Lateral inversion

In a plane mirror, the left side of an object appears as the right side of the image. The right side appears as the left. This swap of sides is called lateral inversion. (“Lateral” means “sideways”, and “inversion” means “turning round”.)

Letters such as R, S and N look back to front in a mirror. Letters that are the same on both sides look unchanged. Examples are A, H, M, O, T and X.

Left: the front of an ambulance with the word AMBULANCE painted back to front. Right: a car’s rear-view mirror. A plane mirror swaps left and right, so a driver ahead sees the word the right way round in the mirror.AMBULANCEAMBULANCEPainted on the ambulanceSeen in the driver’s mirror
Figure 8. Why the word AMBULANCE is painted back to front.

The word on the front of an ambulance is written back to front on purpose. Why?

  1. A driver ahead sees the ambulance in the rear-view mirror.
  2. The mirror swaps the letters round again.
  3. So the driver reads AMBULANCE correctly and can quickly make way.

Remember

  • Plane mirror image: erect, same size, as far behind as the object is in front.
  • It cannot be caught on a screen.
  • It is laterally inverted: left and right swapped.
Quick checkYou stand 2 m in front of a plane mirror. How far are you from your image?Show answer

Your image is 2 m behind the mirror. So it is 2 m + 2 m = 4 m from you.

7The pinhole camera

A pinhole camera is a simple box. It has a tiny hole at one end and a screen of tracing paper or butter paper at the other. It shows a picture of things outside. Unlike a real camera, it needs no lens (the curved glass at the front of a camera).

Make one

  1. Take two boxes (or tubes), so that one slides smoothly inside the other.
  2. Cut out one end of the smaller box. Cover it with tracing paper. This is the screen.
  3. Make a tiny hole with a pin in the middle of the closed end of the bigger box.
  4. Slide the smaller box into the bigger one, screen end first.
  5. Point the pinhole at a bright object. Cover your head and the camera with a dark cloth, and look at the screen.
  6. Slide the inner box in or out until the picture is clear.
A candle stands in front of a cardboard box with a tiny hole. Light from the top of the flame goes in a straight line through the hole and lands low on the back screen; light from the base lands high. The image on the screen is upside down.PinholeScreenCandleImage: upside down
Figure 9. Rays from the top and bottom of the flame cross at the pinhole, so the image is upside down.

Why is the image upside down?

Light travels in straight lines, and all of it must pass through the one tiny hole.

  • Light from the top of the flame goes down through the hole. It lands at the bottom of the screen.
  • Light from the bottom of the candle goes up through the hole. It lands at the top of the screen.

So the image is inverted (upside down). The left and right of the object are also swapped.

Pinhole cameraPlane mirror
Upright or upside down?Upside downUpright
Can it be caught on a screen?Yes, on the tracing paperNo

What if the hole is bigger? It lets in more light, but the picture becomes blurred. This is because light from each point of the object now spreads over a small patch of the screen. The patches overlap and smudge the picture.

Never look at the Sun, directly or through a pinhole camera pointed at it. It can harm your eyes.

Remember

  • A pinhole camera makes an inverted image because light travels in straight lines.
  • The image forms on the screen, so it can be caught on a screen.
  • A very small hole gives a sharper image.
Quick checkIn a pinhole camera you look at a person standing outside. Where does their head appear on the screen?Show answer

At the bottom of the screen, because the image is upside down.

8Useful things made with mirrors: periscope and kaleidoscope

Periscope

A periscope lets you see over a wall or above the heads of a crowd. It is a long tube or box bent like the letter Z. A plane mirror is fixed at each bend.

  • Each mirror slopes at 45° to the tube. That is half a right angle, like the slanting edge of a set square.
  • The two mirrors are parallel: they slope the same way, so they always stay the same distance apart.
  • Their shiny sides face each other.
A periscope: a Z-shaped metal tube with a plane mirror fixed at each bend, at 45 degrees, facing each other. Light from a flower behind a brick wall enters the top opening, is turned downwards by mirror 1 and turned again by mirror 2 into the eye at the lower opening.Mirror 1Mirror 2ObjectWallEye
Figure 10. In a periscope, two mirrors turn the light twice so it reaches the eye.

How the light travels:

  1. Light from the object enters the top opening.
  2. Mirror 1 turns it down the tube.
  3. Mirror 2 turns it again, out of the lower opening and into your eye.

Periscopes are used in submarines, army tanks and bunkers. They let people see what is happening outside without being seen.

Kaleidoscope

A kaleidoscope is a tube that makes beautiful, ever-changing patterns. To make one:

  1. Join three mirror strips of the same size into a long, three-sided tube, shiny sides facing in.
  2. Fit this inside a tube of chart paper.
  3. Close one end with a disc of clear plastic. On it, place a few pieces of broken coloured bangles or beads. Cover them with a translucent sheet, such as butter paper.
  4. Close the other end with a cover that has a small hole to look through.

Light from the coloured pieces bounces again and again between the mirrors. So you see many images of the pieces, arranged in a neat, repeating pattern. Turn the tube a little and the pieces move. You get a brand-new pattern every time. Designers of carpets, wallpapers and fabrics use kaleidoscopes for ideas.

DeviceNumber of mirrorsWhat it does
PeriscopeTwo, parallel, at 45°Lets us see over or around an obstacle
KaleidoscopeThree strips, as a triangleMakes changing patterns by many reflections

Remember

  • A periscope has two parallel plane mirrors at 45°, one at each bend of a Z-shaped tube.
  • A kaleidoscope has three mirror strips; repeated reflections make patterns.
Quick checkWhy does a kaleidoscope show a new pattern every time you turn it?Show answer

Turning it moves the pieces of glass or beads to new places. The mirrors then reflect the new arrangement many times. So a different pattern forms.

Test yourselfTake the 16-question practice quiz on this chapter.